Search
32 articles for “Compression molding”
-
Exploring the Dynamic Mechanical Analysis and Biocompatibility of Compression-Molded PMMA for Biomaterial Applications
Abstract: Metals such as titanium, cobalt, and magnesium are commonly used as biomaterials. However, their use can lead to tissue reactions due to the formation of foreign bodies which may cause blood cancer. Researchers have addressed this issue by substituting biomaterials with polymethyl methacrylate materials (PMMA). The PMMA material being studied is produced using the compression molding technique. This article examines the mechanical properties and biotoxicity of PMMA. These materials have …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 482–499 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Development of Environmentally Sustainable Epoxy Composites with Sunflower Seed Husk Fillers and Study on Thermal and Moisture Properties
Abstract: This study examines the development and characterization of epoxy composites reinforced with sunflower seed husk (SSH) fillers fabricated using the compression molding technique. SSH fillers were categorized into two distinct particle size distributions, namely, 4–53 µm and 79–463 µm, and were incorporated into the epoxy matrix at varying volume fractions ranging from 5% to 20%. The water absorption behavior of the composites was assessed according to ASTM standards, and thermogravimetric …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 28–37 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Green Energy and Intelligent Transportation: The Role of Composite Materials in Electric and Automotive Sectors
Abstract: The global transition toward sustainable mobility is accelerating, driven by mounting concerns over climate change, urban congestion, and the rapid development of green energy technologies. At the heart of this transformation lie intelligent transportation systems (ITS) and electric vehicles (EVs), which are collectively reshaping the future of modern transportation. Within this context, composite materials have emerged as key enablers, offering lightweight, durable, and energy-efficient solutions that enhance vehicle performance, range, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1096–1111 Read article
-
An Innovative AI-Integrated Approach for Identifying the Tensile Robustness of Polymeric Materials
Abstract: Polymeric materials have so many applications and character similar to flexibility, robustness and lightweight nature they are essential to a large variety of industries. Though, it is difficult to establish their tensile robustness appropriately, particularly in a variety of environmental situation. Provide a recommended Artificial Intelligence (AI)-integrated method to decide the issues of rapidly ascertaining the tensile robustness of the polymeric material. Using machine learning (ML), this study, predicted and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 90–97 Read article
-
An Overview of Composite Materials: Historical Development, Classification, and Advancements in Natural Fiber-Reinforced Polymer Composites
Abstract: Composite materials have brought about a paradigm shift in numerous industries by integrating distinct components to improve material performance. Consisting of a matrix and reinforcement, composites synergistically combine the unique properties of each constituent to deliver superior strength, enhanced durability, and remarkable flexibility. These attributes have made composite materials indispensable in diverse fields such as automotive, aerospace, construction, and marine engineering. This article provides a comprehensive exploration of the historical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 158–175 Read article
-
Production of Floor Tile Using Recycle Low Density Polyethylene And Groundnut Shell as a Filler
Abstract: The production of flow tile using recycled low density polyethylene and groundnut shell as filler with the particle size of 120µm was carried out in this project . 10 pphr of all the fillers were weighed and mixed with recycled low density polyethylene on two roll mill machines. The result on this work showed that on FTIR five functional groups were identified and they are; OH, C-H, CH2/CH3, C-O, C=H. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 1, 2024 Read article
-
Improvement of mechanical properties for PMMA based Denture material
Abstract: Denture material properties can be improved by various fiber addition. The most often used denture materials are polymethyl methacrylate (PMMA) resins; nevertheless, they do not have a high flexural strength (FS). This investigation compared the mechanical characteristics of an injection-molded polyamide. Deflex, an additional injection-molded PMMA base material, SRIvocap, and a typical compression-molded PMMA (Meliodent). The flexural qualities (deflection, bending strength, and bending modulus) of 100 different denture base materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 155–165 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Preparation and Characterization of Polyolefins/Inorganic Nano-Filler Nanocomposites via Melt Extrusion Process
Abstract: This work used the melt-mixing method followed by compression molding to create nanocomposites of polyolefins, such as high-density polyethylene and linear low-density polyethylene, packed with both surface-modified and unmodified nano-calcite. The study examined the effects of varying concentrations of nano-calcite, which had been modified using isopropyl tri-(dioctylpyrophosphato) titanate, on the mechanical properties, morphological characteristics, and flow behavior of the resulting nanocomposites. A corotational twin-screw extruder was utilized to manufacture three …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 3, 2024 · pp. 35–43 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Polymer Matrix-Based High-Performance Thermoplastic Composites for Automotive Applications: Design, Characterization, and Interface Behavior
Abstract: The study emphasizes the role of high-performance thermoplastic polymer matrices such as PEEK, PPS, and PA6, selected for their superior thermal stability, mechanical strength, and recyclability in automotive environments. The expanded usage of electric vehicles (EVs) and self-driving transportation creates a demand for advanced materials which are weight-conscious yet high in strength relative to their weight, impact-resistant yet still being environmentally friendly. This study aims to create and define fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 216–237 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Nano Shield-EV: Graphene and CNT-Infused Polymer Composites for Advanced EMI Shielding in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for lightweight, thermally stable, and mechanically robust electromagnetic interference (EMI) shielding materials to ensure the reliable performance of advanced electronic systems. Traditional metallic shields, though highly effective, increase vehicle weight and restrict design flexibility, thereby motivating the search for multifunctional polymer-based alternatives. In this study, NanoShield-EV introduces novel polymer nanocomposites fabricated via melt blending and compression molding, combining engineering-grade …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1036–1047 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Performance Enhancement of COC-Modified LLDPE Films: Optimization of Stiffness, Tear Resistance, and Barrier through Plasma Surface Modification
Abstract: This study explores the development of high-performance packaging materials by blending commodity Linear Low-Density Polyethylene (LLDPE) with engineering cyclic olefin copolymer (COC) as a performance modifier. To leverage the processability of LLDPE alongside the structural rigidity of COC, blends were prepared at various weight ratios (95/05, 90/10, 85/15, and 80/20) using twin-screw melt extrusion, followed by the production of films and sheets via blown film extrusion and compression molding. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 128–143 Read article