Search
28 articles for “Coating science”
-
Recording on Passive Capillary Flow of Dyed Working Liquids in the Polymer based Microfluidic Devices Fabricated inside the Cleanroom Laboratory
Abstract: In this experimental work, author has fabricated total 13 individual microfluidic devices using the maskless lithography, hot embossing lithography, direct bonding technique, diamond like carbon (DLC) coating, and laboratory-made clamping inside the cleanroom laboratory using author’s own hands-on completely. Polymethylmethacrylate (PMMA) is the chosen polymer to fabricate the 10 individual microfluidic devices due to its plasticity and optical transparency. Dyed water, dyed ethylene glycol and dyed ethanol are the prepared …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 35–44 Read article
-
Study of Shear Strength and Hardness of Resistance Spot Welding for Automotive Applications
Abstract: Resistance spot welding is the most popular process used in automotive and aerospace for joining of sheet metals of different thicknesses, shapes, and materials. There has been already much research done on the resistance spot welding. This review paper gives an overview of the performance of resistance spot welds in an automobile. For this, AWS D8.9M:2012 (Test Methods for Evaluating the resistance spot welding behaviour for automotive steel sheet materials) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 1–9 Read article
-
A Review Paper on Minimisation of Sand Casting Defects through Quality Improvement Methods
Abstract: Casting is a process of producing near net–shape metal components. It requires detailed planning, execution and quality inspection to ensure not only the dimensional accuracy of casting parts but the metallurgical integrity and mechanical properties of castings. This paper reviews the different types of casting defects such as shrinkage porosity, cold shut, sand inclusions, mould failure, surface hardening occurring in foundries. These defects directly affect on profitability and quality level …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 10–17 Read article
-
Synthesis and Characterization of In2S3 Nanoflake Thin Film for Photosensor Applications
Abstract: Indium sulphide (In2S3) thin films in the form of nanoflakes are synthesized by using chemical vapour deposition method on glass substrate with the intension to test its photosensor applications. These as deposited nanoflake thin films are characterized for physicochemical properties using X-ray diffraction (XRD) pattern, energy dispersive X-ray (EDAX) analysis,scanning electron microscopy (SEM) while optoelectronic properties were studied using optical and electrical characteristics obtained through UV-Vis transmission spectroscopy and I-V …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
Effect of Varying Particle Size and Content of Barley Husk on the Physical, Mechanical and Diffusional Properties of Poly Vinyl Alcohol/Barley Husk Composite Films
Abstract: Poly vinyl alcohol (PVA)/natural barley husk (NBH) composite films were prepared using solution casting method. The influence of content (5, 10, 15, 20 and 25 wt%) and particle size (89, 152, 251, 354 and 599 µm) of NBH on the physical, mechanical and diffusional properties of composite films were evaluated. Tensile strength and elongation of the composite films decreased by 55.73 and 59.48% and young’s modulus increased by 76.46% with …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 27–35 Read article
-
A Review Paper on Shrinkage Defect in Investment Casting
Abstract: Investment casting is also known as lost wax casting process. It is used to make various components of machines and jewellery with good accuracy compared to other castings. It is also used to make difficult components which may not be possible by conventional casting process. Investment casting is very helpful process for higher quality requirements. But still, there are many defects occurring in the process, like shrinkage, cold run, blow …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 18–20 Read article
-
Effect of Dry Carbon Fibers on the Mechanical Properties of G801 Carbon Fiber Reinforced Composites
Abstract: The field of fiber-reinforced composite materials has progressed quickly in the last two decades, mainly due to the extreme lightness and superior properties of it, when compared to conventional materials. These materials are progressively being utilized as a part of aviation, automotive, electronics, sporting goods, and numerous other modern applications. In this work, we have fabricated carbon fiber reinforced composites by lay-up procedure in different sequences. This work aims to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 2, 2017 · pp. 1–7 Read article
-
Design and Analysis of Different Welding Joints
Abstract: Two parts linked together by the use of localised heat or fusion is called a weld; they join together either with or without the use of pressure or filler material application. Necessary heat required is obtained by burning of gas or by using an electric arc. The word joint and weld are different, weld means joining of two metals by heat and joint means a point where two parts are …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 2, 2017 · pp. 18–22 Read article
-
Effective Design of Riser for Defect-Free Casting
Abstract: Accurate design of riser helps in producing a defect free casting part. Inaccurate design of riser results in defects like hot spot, shrinkage and blow holes. Present paper focuses on the study of the different parameters occurring during a solidification process, equation which governs the solidification problem and different boundary conditions which play vital role during heat transfer in a solidification process. A literature study is also been conducted in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 2, 2017 · pp. 23–27 Read article
-
Improving Quality of Thin Walled Sand Casting through Selective Quality Improvement Methods
Abstract: Six sigma is a quality improvement methodology. In this research paper, six sigma methodology is used for end shield FG 200 Grey casting of electric body. DEMAIC methodology along with Taguchi method is used to minimize the defect in end shield casting. DOE and analysis for variance techniques are used to determine the correlation of defects with the pouring temperature, pouring time and Si percentage and their optimum values are …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 2, 2017 · pp. 28–36 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Current status of reinforced thermal spray coatings to increase corrosion resistance of boiler tube steels
Abstract: AbstractThermal barrier coatings are one of the best techniques to protect the metal surface from erosion corrosion attach. Aluminium and nickel based alloys are extensively used as thermal barrier coated materials with various techniques such as HVOF, APS etc. The techniques for applying the coatings gain their importance in thermal spray which results to get a layer deposited without affecting the properties of substrate material. Thermal spray coatings have been …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 1–7 Read article
-
Studies on the Electrical Characteristics of AlGaAs/GaAs High Electron Mobility Transistors
Abstract: AbstractIn this work, total 5722 individual simulation outputs are reported. The effects of drain voltage, gate voltage, aluminium mole fraction, and gate length on drain current are studied in AlGaAs/GaAs high electron mobility transistors (HEMTs). The linear region and saturation region are prominent in each drain characteristic curve. The drain current reduces in the structure of larger gate length. This work is useful to fabricate the HEMT based biomedical sensors. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 30–40 Read article
-
Fatigue Test on Cost Effective Aluminium Metal Matrix Composite Prepared from Discarded Toner Powder and Coconut shell Ash Particles
Abstract: AbstractAs there is an increasing demand for low cost reinforced composite materials in various industrial applications, in this work Aluminium Metal Matrix Composite was prepared by reinforcing cost effective reinforcements like discarded tonner powder particles and coconut shell ash. Aluminium 2024 was taken as the base matrix for preparing the composite as it is widely used in automobile industry. The samples taken for the investigation were prepared by two step …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 15–20 Read article
-
Processing of Magnesium Metal Matrix Composite Reinforced with Graphene Nano Platelets through Vacuum Stir Casting and Investigating its Mechanical Behaviour
Abstract: AbstractThe application of metal matrix composites (MMCs) as structural engineering materials has received increasing attention in recent years. Their high strength and toughness at elevated temperatures coupled with low-density makes them suitable for use in applications where conventional engineering materials, such as steel are used. MMCs exhibit significantly higher stiffness and mechanical strength compared to matrix alloys, but often suffer from lower ductility and interior fracture toughness. MMCs have the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 21–29 Read article
-
A Comprehensive Analysis of Coating Technology and Thin Films
Abstract: In contemporary materials science, thin film and coating technologies are essential because they allow for the improvement of surface characteristics, including electrical conductivity, hardness, corrosion resistance, and optical performance. These technologies use physical, chemical, or hybrid deposition techniques to deposit materials in layers that range in thickness from a few nanometres to several micrometres, depending on the required functional properties and application areas. The content, thickness, and microstructure of films …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 50–64 Read article
-
Polymer-Based Film Coatings for Enhancing Drug Stability and Shelf-Life
Abstract: Pharmaceutical stability is a crucial factor in ensuring drug efficacy and safety throughout its shelf-life. Polymer-based film coatings have emerged as an effective strategy to enhance drug stability by protecting active pharmaceutical ingredients (APIs) from environmental stressors such as moisture, oxygen, temperature fluctuations, and light exposure. These coatings act as physical barriers that prevent degradation, improve mechanical integrity, and enable controlled drug release. Various types of polymers are employed for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 558–570 Read article
-
Zinc Oxide Nanoparticles from Murayya koenigii: Antibacterial Potential Review
Abstract: Nanoparticles (NPs) display unique characteristics in contrast to conventional physico-chemical synthesis methods, and they are utilized in various life science fields including surface coating, catalysis, food packaging, corrosion prevention, environmental cleanup, electronics, biomedical applications, and antimicrobial purposes. Metal NPs synthesized through green methods, particularly from plant origins, have garnered significant interest because of their inherent traits such as environmental friendliness, quick production, and cost efficiency. Over the past few years, …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 1, 2024 · pp. 54–67 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background: Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their high solar irradiation. The rising number of dust storms, as well as depositing particulate matter into the air, has caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 28–38 Read article
-
Thin Film Coatings for Anti-Reflective and Anti-Fogging Applications in Optical Devices
Abstract: To maximize optical device lifetime and performance, thin film coatings are crucial. Coatings with anti-reflective (AR) and anti-fogging (AF) properties are important uses that improve optical systems' usability and performance. This review covers materials, deposition methods, and performance measures, providing a thorough analysis of recent developments in AR and AF thin film technologies. The study examines several techniques, such as chemical vapor deposition (CVD), sputtering, and sol-gel procedures, for producing …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 2, 2024 · pp. 26–30 Read article