Search
45 articles for “CFRP”
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Strengthening of RC Structures Using CFRP-Near Surface Mounted Technique
Abstract: This study reviews the literature on fiber-reinforced polymers (FRP) and their applications in near-surface mounted (NSM) applications. Since fiber-reinforced polymer (FRP) composites outperform many conventional steel reinforcing methods in terms of quality, they are nearly entirely dependent on advanced concrete technology. Many structures that will still be in use two decades from now have already been constructed. A portion of these structures must undergo enhancements or be replaced, as they …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 304–313 Read article
-
Direct Synthetic Routes of MXenes and Their Application in Carbon Fiber Reinforced Plastics (CFRPs) As Supplementary Sizing Layer†
Abstract: Sized carbon fibers with a supplementary sizing layer of MXenes (synthesized via traditional MAX phases), bonded to carbon fibers (CFs) as well as the resin matrix via different kinds of physicochemical (van der Waals force, hydrogen bonding, covalent bonding) interactions enhanced the performance of the resulting carbon fiber reinforced plastic (CFRP) materials. This is because of the strong interface generated due to the appearance of MXene at the interface of …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 07–13 Read article
-
Enhanced Durability and Performance of Reinforced Concrete Beams through CFRP Wrapping: An Experimental Investigation
Abstract: Globally, maintaining and repairing aging reinforced concrete structures poses a significant challenge for the construction industry. Numerous structures built before modern earthquake-resistant design codes lack adequate seismic resilience. Additionally, evolving service requirements often necessitate strengthening existing structures to handle increased loads. While past research explored the effectiveness of various Fiber Reinforced Polymer (FRP) wrappings under specific conditions, limited studies have comprehensively compared the performance of Carbon Fiber Reinforced Polymer (CFRP) …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 37–49 Read article
-
Mechanical Performance and Material Properties of Nsm CFRP Polymer System
Abstract: Near-surface mounting systems are an advanced embedded technique application of CFRP composites in which the efficiency of the structure is mostly dominated by polymer matrix properties and interface stress transfer mechanisms. This review presents a holistic materials-based perspective on the experiment, analytical, and numerical studies conducted on the NSM-CFRP composite system, specifically on the behavior of the epoxy adhesive, interfacial behavior of composite–substrate system, and related structure–property relationships. The literature …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 311–319 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Interfacial Bonding and Performance of Polymer-Based CFRP Composites in Externally Applied Configurations
Abstract: Polymer-based carbon fiber reinforced polymer (CFRP) composites are widely used for externally bonded strengthening and retrofitting applications due to their high strength-to-weight ratio and adaptability to existing structures. In such systems, overall performance is governed not only by the fiber–matrix interaction within the laminate, but more critically by the polymer adhesive layer and its interaction with the substrate. Polymer chemistry, interfacial bonding mechanisms, processing conditions, and environmental exposure collectively influence …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 952–966 Read article
-
Buckling Assessment of Concrete Column, RCC Column and Concrete Column Strengthened by CFRP with Different Slenderness Ratio.
Abstract: Using finite element modeling, this study presents a buckling analysis and total deformation assessment of a concrete column, a column made of reinforced cement concrete (RCC), and a concrete column enhanced with Carbon Fiber-reinforced Polymer (CFRP) laminates (FEM). Utilizing the ansys18.1 software, a comprehensive analysis is carried out for columns that have a variety of slenderness ratios to arrive at a more accurate performance estimation. Because they can support the …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. S11–S22 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
High-Velocity Impact Response of CFRP and Hybrid Composites: A Comprehensive Review on Ballistic Resistance and Damage Mechanisms
Abstract: This review consolidates recent advances in the study of high-velocity impact response of carbon fiber reinforced polymer and hybrid composites. Carbon fiber reinforced polymer composites are widely applied in aerospace, automotive, and defense due to their high strength-to-weight ratio, stiffness, and durability. However, their susceptibility to impact damage such as delamination, matrix cracking, and fiber breakage limits their performance under dynamic loading. To overcome these challenges, researchers have explored reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 100–122 Read article
-
Artificial Neural Network Based Prediction of Impact Loads and Thickness in CFRP and GFRP Composite Laminates
Abstract: Recent technological advancements, particularly the integration of neural networks, have facilitated a predictive approach to complex engineering problems, especially those involving composite materials with directional properties. The scarcity of literature on predicting impact damage using experimental and ultrasonic flaw detection data motivated this study. Experimental assessment of impact damage on carbon fiber/epoxy (CFRP) and glass fiber/epoxy (GFRP) composites was conducted using low-velocity drop weight impact testing. Damage assessment employed an …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 34–45 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Effect of Compressive Strength of Core and Precast Concrete on the Behavior of Column Retrofitted by Precast Segment and FRP Wrapping - A Finite Element Study
Abstract: In the present investigation the effect of compressive strength of core and precast concrete on the behavior of columns retrofitted by attaching precast segments and followed by FRP wrapping through Finite Element Analysis. A rectangular column converted into an elliptical column by attaching precast segment is modeled using ANSYS workbench, A Finite Element Analysis software. A Finite Element Model is developed, considering various structural parameters such as grades of core …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 302–310 Read article
-
Optimizing Vehicle Structures Using Functionally Graded Materials of Aluminum and Carbon Fiber Reinforced Polymer Composites
Abstract: This article investigates the optimization of vehicle structures through application of functionally graded materials (FGMs), specifically aluminium and carbon fibre reinforced polymer (CFRP) composites. Such materials, known as FGMs, are characterized by spatial variations in composition and structure designed to improve so-called performance attributes. For the purposes of this research, the material properties of aluminium and CFRP composites are taken to be randomly distributed in thickness direction of a FGM …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 478–489 Read article
-
Modelling and Analysis of Morphing Wing Structure for Variable Camber
Abstract: This study explores the modelling and analysis of a morphing wing with variable camber configurations to observe its aerodynamic characteristics compared to conventional form. The morphing wing is the concept where the shape of the wing is altered mid-flight based on different phases of flight to improve its aerodynamic characteristics. Morphing wing structure designs such as the corrugated and FISHBAC designs were considered for this analysis. The NACA 2412 airfoil …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 209–224 Read article
-
A High-Efficiency Fuzzy-Logic-Controlled Wireless Charger Enabling the Safe Integration of Electronics in Carbon Fiber Reinforced Polymer E-Bikes
Abstract: The integration of advanced electronics into structures made from carbon fiber reinforced polymers (CFRP) presents significant challenges, including thermal management constraints, electromagnetic interference (EMI), and the imperative for lightweight components. This study addresses these challenges by designing and validating a fuzzy logic-based wireless charging system specifically engineered for lightweight E-Bikes employing CFRP frames. The system mitigates thermal risks associated with the low thermal conductivity of polymer composites by implementing a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1159–1172 Read article
-
Eco-Efficient Skies: Life Cycle Assessment and Carbon Footprint Minimization of Fiber-Reinforced Polymer Composites in Aerospace Application
Abstract: The increasing integration of fiber-reinforced polymer (FRP) composites in aerospace structures necessitates a rigorous evaluation of their environmental sustainability throughout their entire life cycle. This study presents a comprehensive life cycle assessment (LCA) and carbon footprint analysis of carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) composites applied to structural and semi-structural components in commercial aerospace applications. Following ISO 14040/14044 standards and employing the ReCiPe 2016 Midpoint (H) impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–160 Read article
-
New Insight into the Composition and Structure of Sizing Agent from NMR Spectroscopy
Abstract: Sized carbon fibers (CFs) are of commercial significance as they form the main load-bearing component in advanced materials, namely, carbon fiber-reinforced plastics (CFRPs). Much of the knowledge of sizing composition and the process of sizing is a subject of intellectual property rights owing to its commercial relevance. In this original research article, deeper insights into the structure and composition of the sizing agent used for the surface modification of commercial …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 06–23 Read article
-
Diglycidyl Ether of Bisphenol A (DGEBA) Based Epoxy Sizing Agent Induces Surface Polarity in Carbon Fibers†
Abstract: Determination of the chemical structure and composition of the sizing agent is a challenge as its concentration is low, varying in the range from ~0.5 wt.% (for polyacrylonitrile, PAN, based carbon fibers) to ~1 wt.% (for pitch-based carbon fibers). Moreover, such a piece of knowledge is vital for designing compatible polymer matrices to prepare CFRPs for diverse applications. As a result, the sizing layer that is coated on the carbon …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 24–34 Read article