Search
20 articles for “Brine”
-
Thermodynamic modelling of the effects of high temperatures on brine fluid density
Abstract: Current trends in oil discoveries points to deep water zones characterized by temperatures ranging from 150oC to 350oC which needs good prediction of the fracture pressure and pore pressure hence imperative to continually understand temperature-density relationships of the fluids which are pumped downhole for well control. This paper seeks to propose a new, cost effective and easier method of estimating the reduction in density of brine completion fluid as it …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 26–35 Read article
-
Model Optimisation of Waterflood and Low Salinity Brine Injection to Enhance Gas Condensate Recovery – A Case Study of A Rich Gas Condensate Sandstone Reservoir in The Offshore Tano Basin of Ghana
Abstract: To enhance production of entrapped condensate in gas-condensate reservoirs without delay in produced gas sales, this study looked at the impact of waterflood and low saline brine injection on an offshore gascondensate reservoir in the Tano Basin, Ghana, West-Africa. The injector well placements, rate, and pressure were optimised using three optimisers (Differential Evolution, Particle Swarm Optimisation, Design Exploration and Controlled Evolution). Condensate and gas recovery increased by 30.3% (from 19.1% …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 20–31 Read article
-
Well Injectivity Management during Geological Carbon Sequestration Activity
Abstract: It is well known that the saline aquifer formations are considered very reliable candidates for carbon sequestration because of their wide availability and they have good storage capacity. Due to high formation salinity, there a big concern about bore formation dry-out resulting from the salt precipitation in the form of halite (NaCl). The mutual solubility between CO2 and brine is responsible for creating the salt deposits, this processes may take …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 32–43 Read article
-
Heat Treatment Research Studies of EN9 Carbon Steel by Quenching Operation in Different Quenching Media
Abstract: In this experimental research, EN9 type of steels is selected to process the heat treatment by quenching to increase the hardenability of a material. EN9 steel is cut into small work samples with diameter 25mm and length 15mm to analyze. Then they are polished the cut surface in a fine manner. Microstructure and hardness are to be found for EN9 work pieces before heat treatment at different locations like at …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 1, Issue 2, 2023 · pp. 1–25 Read article
-
Incorporating Material Fatigue Parameter Determine in The Rolling & Sliding Contact Fatigue Analysis of Gears
Abstract: As the material's intricate stresses and strains are always shifting during phases of loading, determining the predicted equipment working under rolling-sliding contact loads and their fatigue lives (wheels, bearings, and gears) is particularly difficult. Another difficulty is not knowing the precise characteristics of the material used to make the components, which is particularly noticeable. when it comes to heat-treated components, where the material characteristics' values can differ greatly among the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 1–5 Read article
-
Synthesis and Study of Different Thioamides as Corrosion Inhibitors
Abstract: Many organic compounds having electron rich atoms in their structures, such as nitrogen, and sulphur are widely use in lubricating additives, in the oil industry to minimize corrosion. The presence of electron rich atoms in the molecules increases its ability to form coordinate covalent bonds with the metal atoms, involved in the corrosion environment. Compounds based on fatty amines, aromatic amines, imidazoline, diamidazoline, and fatty amides are now, uses as …
Published in Journal of Catalyst & Catalysis · Vol. 3, Issue 3, 2016 · pp. 18–25 Read article
-
A Review on Phytochemistry and Pharmacological Properties of Curcuma amada (Zingiberaceae)
Abstract: Plant has been employed in traditional medicine since ancient times. Curcuma amada Roxb. (Mango ginger), is a member of Zingiberaceae family and the Curcuma genus. It is a distinctive spice that shares a similar appearance with ginger but provides a raw mango taste. It is considered as a valuable plant in traditional medicine which plays a crucial function in both the food and pharmaceutical industries. Ayurveda and Unani medicinal traditions …
Published in Research & Reviews : Journal of Herbal Science · Vol. 13, Issue 3, 2024 · pp. 10–20 Read article
-
Excoecaria agallocha Extract from Leaves Encounters Antifungal, Antibacterial, and Cytotoxic Activity – In Vitro Studies
Abstract: Mangroves contain a wide range of bioactive substances, certain of and these have been used as solutions for a variation of conditions for thousands of years. Excoecaria agallocha leaf application components have been extracted in the presence of organic solvents along with water-based with a Soxhlet apparatus and antibacterial research properties employing diffusion agar well assays towards nine different kinds of culture infectious agents, six clinical trials isolated compounds, as …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 15, Issue 2, 2025 · pp. 1–7 Read article
-
To Study the Effect of Change in Pressure and Temperature on Performance of Reverse Osmosis Process
Abstract: Day-by-day population is increasing and this increasing population leads to some problems one of them being availability of pure and usable water. As population is increasing, demand for pure water is increasing and the water resources are limited, in fact resources are depleting. This demands to find out some new ways to save water. One of source of wastage of water is the brine rejection from Reverse Osmosis process and …
Published in Journal of Mechatronics and Automation · Vol. 6, Issue 1, 2019 · pp. 37–40 Read article
-
A Study on the Low Salinity Waterflooding (LSW) in a Part of a Depleted Oilfield of Upper Assam Basin
Abstract: Maximizing the hydrocarbon recovery from depleted oilfields is the biggest challenge now a days which becomes an opportunity for advanced EOR technologies. One of such EOR technology that can promote the oil recovery efficiency from such fields is the low salinity waterfloofing (LSW) which gains the attention of many researchers due to its easiness to use implications, less cost and environment-friendly nature. Different studies have shown that fines migration, pH …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 30–38 Read article
-
Cytotoxic, Anthalmintic and Analgesic Activities of the Methanol Extract of Ricinus communis (Family: Euphorbiaceae)
Abstract: The aim of this study was to evaluate the phytochemical screening, cytotoxicity, anthelmintic activity and analgesic properties of the methanol extract (leaves) of Ricinus communis (Family: Euphorbiaceae). The methanol extract of the leaves showed mild cytotoxic activity with the LC50 value 6.456 µg/mL compared to vincristine sulfate (LC50 0.812 µg/mL) using brine shrimp lethality bioassay. The anthelmintic activity was performed by observing the time of paralysis and the time of …
Published in Research and Reviews: A Journal of Toxicology · Vol. 5, Issue 1, 2015 · pp. 27–35 Read article
-
Chemical Profile and Toxicity of Fresh and Dry leaves of the Essential Oils of Vetiveria zizanioides (L.) Nash. From Southwest Nigeria
Abstract: The fresh and dry leaves of Vetiveria zizanioides (L.) Nash (Gramineae) plant was collected, air dried and authenticated at the University of Ibadan Herbarium with voucher number: UIH-23237. The plant's dried, fresh leaves were hydro distilled in a Clevenger device to extract the essential oils. The oils were characterized by Gas Chromatography-Mass Spectrometry (GC – MS) while the toxicity of the essential oils was tested using brine shrimps’ lethality assay. …
Published in Recent Trends in Cosmetics · Vol. 1, Issue 1, 2024 · pp. 44–49 Read article
-
Strategic Approaches to Sustainable Lithium Extraction: Advances in Technology, Resource Recovery, and Environmental Management
Abstract: Lithium, a critical mineral for modern technological advancements, is in high demand due to its role in the production of lithium-ion batteries, which power electric vehicles, portable electronics, and renewable energy storage solutions. This paper provides a comprehensive overview of lithium’s sources, including pegmatites, brine deposits, and sedimentary lithium minerals, while examining production, extraction methodologies, and challenges related to sustainability and environmental impact. Additionally, advancements in laser-induced breakdown spectroscopy (LIBS) …
Published in International Journal of Minerals · Vol. 1, Issue 2, 2024 · pp. 8–13 Read article
-
Investigation, Fabrication and Testing of Spur Gear Using Composite Material
Abstract: Composite materials constitute one of the favorable, efficacious material zones for tomorrow’s sustainable future through identification of materials with higher strength to weight ratio. A composite material is combination of two or more different materials with varied qualities that work together to create a material that is better than the sum of its parts. Therefore, finding some alternative material for various mechanical applications to accelerate the Indian composite industry is …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 1–8 Read article
-
Experimental Study on the Impact of Polymer (PAM) in Enhancing Oil Recovery in Upper Assam Basin Oil fields
Abstract: The Upper Assam Basin, one of India’s most mature and extensively exploited hydrocarbon provinces, is experiencing declining oil production due to reservoir depletion and unfavorable crude oil–brine–rock (COBR) interactions. In this context, alkali–polymer (AP) flooding has emerged as a promising chemical enhanced oil recovery (EOR) strategy. AP flooding reduces interfacial tension (IFT) through in-situ surfactant generation by alkali and improves sweep efficiency via polymer-based mobility control, typically using polyacrylamide (PAM). …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 283–296 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
The Effects of Dissolved Sodium Chloride (NaCl) on Well Injectivity during CO2 Storage into Saline Aquifers
Abstract: Among different options proposed for carbon dioxide (CO2) storage and sequestration, saline formations seem promising due to their wide availability and potentially large storage capability. As supercritical (SC) CO2 is injected into the formation, a variety of coupled processes takes place. Halite precipitation requires particular interest due to its potentially significant impact on permeability impairment, and thus reduction of injectivity in the near well bore region. The selected candidate for …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 11–22 Read article
-
Numerical Investigation of the Osmatic Flow Impact on the Load Recovery and Early Well Performance
Abstract: The complexity of shale system coupled with the mystery of low fracturing fluid recovery has puzzled many researchers. Field reports from hydraulic fracturing operations performed on shale formation have highlighted the low recovery of the fracturing fluid. The fate of the hydraulic fracturing fluid is still controversial issue. However, literature has attributed the low load recovery to either trapping into the natural or created micro-fracture or imbibition to the matrix. …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 52–64 Read article
-
Enhanced Oil Recovery through the Application of Nanoparticles with Irvingia Gabonensis in Flooding Process in the Reservoir
Abstract: This experimental investigation is aimed at establishing the ability of nanofluids formula from a mixture of nanoparticles and oil extracted from Irvingia gabonensis (bush mango) in enhancing recovery from oil reservoir. The laboratory study involved the use of core flooding unit, crude oil, brine, nano-particles and Irvingia gabonensis. In this study, nanofluids formulated from nanoparticles of aluminum oxide (Al 2 O 3 ) and zinc oxide (ZnO) respectively were used …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 1–9 Read article