Search
227 articles for “Aluminum(Al)”
-
Review on Investigation of Tailor Welded Blanks of Dissimilar Aluminum-Magnesium Alloys and Hybrid Carbon Composites
Abstract: Reduction in weight, better fuel efficiency and cost effectiveness are the salient attractive features of Aluminum-Magnesium alloys and carbon composite materials. By making use of tailor welded blanks of dis similar materials of different strengths at appropriate locations in automobile outer body, one can achieve these objectives. At the same time, fabrication of these Tailor Welded blanks of Aluminum-Magnesium alloys, next generation carbon composite materials by usual fusion welding processes …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 66–73 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Pore Distributions in Porous Anodic Aluminum Oxide (PAAO) Surfaces of Pure and Commercial Aluminum Substrates
Abstract: Porous anodic aluminum oxide (PAAO) surfaces were developed on pure aluminum (PA) and commercial aluminum (CA) substrates by anodization as a function of voltage in phosphoric acid bath at 278 K and were analyzed by scanning electron microscopy. The interpore distances were plotted in the form of frequency histograms to examine pore-ordering characteristics. Self-ordered porous structures have been obtained at 200 and 160 V for PA and CA substrates respectively …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 143–153 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
A Study of Improvement of Mechanical Properties of Aluminum by Conventional Casing and Deformation Process
Abstract: Nowadays, Aluminum-Zinc alloy system are the major and rapid development in the field of automotive and aerospace industries for growing demand of efficient vehicles and aircrafts to reduce energy consumption and air pollution. Aluminum is a very soft metal by nature. Different alloying elements were added in the past to increase its strength and toughness. Zinc is considered as a major alloying element in aluminum to increase its strength and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 16–20 Read article
-
Simultaneous Improvement of Mechanical Properties and Thermal Stability of Polyvinyl Chloride Nanocomposite by Magnesium Aluminum-Layered Double Hydroxide
Abstract: The application of nanoclays in polyvinyl chloride (PVC) is limited as the organic modifier of conventional nanoclays can degrade PVC. Using usual nanoclays could reduce thermal stability due to the catalytic effects on PVC degradation, so the main chalenge is to find suitable nanoclay for PVC. The effects of two nanoclays, MgAl-layered double hydroxide and alkylammonium-modified montmorillonite, were studied on the mechanical properties of PVC nanocomposites. Dioctyl phthalate (DOP)-plasticized PVC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 825–837 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article
-
Aluminum and its Alloys to Recover from Corrosive Weather
Abstract: Corrosion is defined as deterioration of material, usually metal, because of reaction with its environment and which requires presence of an anode, a cathode, an electrolyte and an electrical circuit. Aluminum and its alloys are reactive to weather of exposure, e.g. ambient, acid and alkalis. Solid to pigments are prevented from corrosion by using inhibitors. Organic inhibitors are ever praised due to non-toxic performances. Basic processes are surface adsorption to …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 7–19 Read article
-
Wear Behavior and Mechanical Characterization of Pure Aluminum Reinforced with RHA by Using Powder Metallurgy Method
Abstract: In recent years, composites made from aluminum and its alloys have gained significant attention due to their optimal blend of low weight, high strength, impressive toughness, enhanced thermal stability, straightforward casting processes, superior corrosion resistance, and availability compared to unreinforced aluminum and its alloys. These aluminum-based composites are widely utilized in producing components for industries such as automotive, aerospace, marine, and nuclear. Rice husk ash (RHA) is a fine, powdery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 495–502 Read article
-
Weldability of Aluminum Alloy Using Pulsed current Tungsten Inert Gas Welding Process forMechanical Properties: A Review
Abstract: In the TIG welding, also known as gas tungsten arc welding, metal components are bonded by applying heat or pressure. Inert gas is used in pulsed current welding to encapsulate the electrodes and weld pools. Tungsten inert gas is used in the complex welding process known as TIG welding. It alternates between amps operating at high and low levels. Here, increasing the current results in improved power production and weld …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 1, 2024 · pp. 28–37 Read article
-
Inhibitors for 2000 series from aluminum
Abstract: Corosion inhibitor is traditional procedure to protect under any weather. Use of inhibitors have formed thin coating film as well film having hydrofobic to super hydrophobic properties. Angle of contact for weather chemical is simplest test appeared to depend on stabilization of surface under interest. Inihibitor considerations have appeared from hybrid toxic-nontoxic to purely green inhibitors to reproduce as environmentally friendly usage. Inhibitors applicable during anodization has technical importance from …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 28–38 Read article
-
Experimental Test for the Replacement of Aluminum Sheets Instead of Steel Sheets in the Automotive Industry and the Effect of this Replacement
Abstract: Nowadays, vehicles cause air pollution due to high fuel consumption, and it has a direct relationship with increasing vehicle weigh. The increase of pollution will lead to rise in greenhouse gases that will cause special damages during a long period time. In this paper, instead of using steel sheets, aluminum sheets are proposed for the vehicle body and its interior components. It is attractive to increase its speed by reduction …
Published in Journal of Automobile Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 34–39 Read article
-
Aluminum based types of hydrophobic coatings for Engineering Materials: A Review
Abstract: Today's coating applications allow for the employment of a wide range of techniques and substances to safeguard products and structures from chemical and chemical harm. Coatings are now widely utilized in manufacturing across the globe to boost productivity and cut costs, both of which are crucial for maintaining the industry's profitability. Materials with coatings are stronger than those without coatings. Strong and hard metals, ceramics, bioglass, polymers, and plastic materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 113–133 Read article
-
An Overview of The Impact of Reinforcement on Mechanical and Thermal Characteristics of Aluminum Alloy Composites
Abstract: Aluminum is utilized extensively in the domains of aerospace, electronic technology, electric module packing, automotive body structure, solar and wind energy management, and so on because of its better potential for weight reduction. Strength of aluminum is very less so application is limited where high strength is needed. Aluminum alloy which have greater potential for weight reduction as well as high strength to weight ratio have ability to overcome these …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 240–249 Read article
-
The Examination of Design and Weight Optimization for a Light Motor Vehicle (LMV) Drive Shaft through the Utilization of a Composite Material Composed of Aluminum and Glass Fiber (Al + GF)
Abstract: Aluminum is primarily used in Metal Composites because of its lighter weight and higher strength. Glass fibers are wound around an aluminum shaft to create the composite. ANSYS results determine the relative amounts of aluminum and E-glass fiber in each shaft. The purpose of this study is to use a torsion test to evaluate the mechanical performance of a composite shaft composed of aluminum and glass fiber. The results are …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 1–17 Read article
-
Aluminum Oxide Nanofluids Thermal Conductivity Enhancement Analysis: A Review
Abstract: Aluminum oxide nanofluids are enhanced heat transfer fluids that utilize the thermal conductivity of aluminum oxide (Al2O3) nanoparticles suspended within a base fluid. As technology advances, more efficient high heat flux solutions are required to manage the higher concentration of power in smaller designs. In this review paper, data from multiple experiments pertaining to the thermal conductivity of Al2O3 nanofluids will be presented. Information is compiled from peer reviewed and …
Published in Journal of Thermal Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 48–58 Read article
-
Development and Characterization of Aluminum Alloy Reinforced with Hematite Particulate Composite for Automotive Application
Abstract: This study reviews the characteristics of aluminum alloy with Hematite particulate composite reinforced at different wt. % prepared by different casting methods through which we can achieve required hardness, wear resistance, microstructure and life extension of an automotive parts. This paper describes the chemical composition of different aluminum alloys and Hematite. SEM analysis is studied in order to determine the nature of the structure and Design of Experiments (DOE) using …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 7–11 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article
-
Effect of Surface Pore Filling and Adhesive Joining on Energy Absorption of Closed Cell Aluminum Foam
Abstract: The joining of aluminum foam is explored in this paper. Foam specimens were sectioned and joined with commercially available adhesive and tested for its energy absorption capability against a normal foam specimen. There was a decrease in the plateau stress but the decrease is not significant. The effect of surface pore filling by the adhesive was also realized. It was found that the adhesive in the surface cells introduces constraints …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 117–124 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article