Search
40 articles for “Aerodynamic performance”
-
Effect of Leading-Edge Roughness on the Aerodynamic Characteristics of the Wind Turbine blade
Abstract: Leading-Edge Roughness (LER) strongly dictates boundary layer transition and performance degradation on an airfoil operating at transitional Reynolds numbers, an aerodynamic regime where shear-layer stability mechanisms remain highly complex. The wind tunnel experiments were conducted to investigate the aerodynamic impacts of surface roughness applied over 25% of the chord of a NACA 0018 airfoil using two discrete roughness gradations. Surface roughness induces an early boundary layer trip, causing elevated section …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Biomimicry of Eucalyptus Leaf Design for Optimization and Fabrication of Airfoil
Abstract: Biomimicry is the practice of drawing inspiration from natural forms to solve engineering problems, which has become progressively popular for refining design efficiency and performance. This work discovers how biomimicry can be applied to airfoil design, precisely through the unique structure of Eucalyptus leaves, a concept rarely explored in airfoil profiling. The work presented here, focuses on enhancing airfoil designs by incorporating the intricate features of these leaves. The airfoil …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 359–372 Read article
-
Robust Design of Subsonic Airfoil by Multi-Objective Six Sigma Approach
Abstract: It is well known that aerodynamic performance of a UAV is very sensitive to the wing shape and flight conditions, and inevitable uncertainties such as wing manufacturing errors and wind variations may lead to drastic deterioration in its aerodynamic performance. In the UAV wing design, therefore, it is required not to use the conventional design optimization approach considering only optimality of performance at the design point, but to use the …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 14–23 Read article
-
Design of Maritime Empennage Unmanned Aerial Vehicle (UAV): A Comprehensive Study
Abstract: This project presents a comprehensive study on the design and development of a maritime empennage unmanned aerial vehicle (UAV) tailored for operations in coastal and naval environments. The primary objective is to engineer an efficient, stable, and mission-adaptable UAV with an optimized empennage configuration that enhances aerodynamic performance and control in maritime conditions. The study involves a systematic design process encompassing mission requirement analysis, conceptual and preliminary design, aerodynamic modeling, …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 1, 2026 Read article
-
Comparative Environmental and Economic Assessment of Wind Turbine Blade Materials
Abstract: Wind energy has proven to be one of the most stable and non-polluting renewable energy sources to mass power production. For energy production wind turbine is an essential part of the wind power plant. The choice of the blade material and coating applied on it has a strong impact on aerodynamic performance, mechanical strength, fatigue life, manufacturing possibility, and environmental effects throughout the operating life of the turbine. Hence, authors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 91–99 Read article
-
Mathematical Modelling and Experimental Analysis of a 3D Printed PLA UAV Propeller using NACA 4412 Airfoil
Abstract: The usage of unmanned aerial vehicles (UAVs) has grown significantly because they are cost-effective and easy to availability for many applications. However, researchers have focused on the designing for various UAV propeller/rotors geometries, including their aerodynamic performance and structural examination. An elegant, designed propeller can enhance the UAV's endurance limit and its reliability. This research focuses on designing of UAV propeller and its fabrication using Polylactic acid (PLA) material using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 825–832 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Aerodynamic Optimization of UAV Wings Using Machine Learning
Abstract: Unmanned Aerial Vehicles (UAVs) are increasingly deployed across defense, transportation, agriculture, and environmental monitoring, demanding improved aerodynamic efficiency to enhance endurance, stability, and payload capacity. Traditional aerodynamic optimization approaches, relying on computational fluid dynamics (CFD) simulations and wind tunnel experiments, are often time-consuming and computationally expensive. This study proposes a machine learning (ML)-driven framework for the aerodynamic optimization of UAV wing geometries, aiming to significantly reduce design cycles while improving …
Published in International Journal on Drones · Vol. 2, Issue 1, 2026 · pp. 1–7 Read article
-
The Impact of High-Performance Computing on FEA and CFD Simulations
Abstract: The integration of advanced simulation techniques, such as Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD), has transformed mechanical design by enabling engineers to develop optimized, efficient, and reliable systems. FEA is widely applied to analyze structural mechanics, thermal stresses, and vibrations, offering detailed insights into material behavior and design performance. On the other hand, CFD focuses on simulating fluid flow, heat transfer, and aerodynamic performance, making it indispensable …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 26–35 Read article
-
Aerodynamic Analysis of Bio-inspired Wing with Adaptive Aspect Ratio
Abstract: The bio-inspired morphing wing is a futuristic concept in the aviation field that draws inspiration from birds and insects. Drawing inspiration from the exceptional flight capabilities of birds and insects, the goal is to develop a wing design that can adapt its aspect ratio, similar to nature. By incorporating the adaptive aspect ratio capabilities into the wing configuration, it becomes possible to optimize the wing's aerodynamic performance to adapt wide …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 143–153 Read article
-
Modelling and Analysis of Morphing Wing Structure for Variable Camber
Abstract: This study explores the modelling and analysis of a morphing wing with variable camber configurations to observe its aerodynamic characteristics compared to conventional form. The morphing wing is the concept where the shape of the wing is altered mid-flight based on different phases of flight to improve its aerodynamic characteristics. Morphing wing structure designs such as the corrugated and FISHBAC designs were considered for this analysis. The NACA 2412 airfoil …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 209–224 Read article
-
Study on the Method of Constructing a System of Linear Equations for Calculating Aerodynamic Derivatives
Abstract: The aerodynamic derivatives can be calculated from the unsteady hydrodynamic forces experienced by the harmonic-oscillating vehicle. Until now, unsteady flow field analysis in aerodynamic derivative calculations has been applied mainly to thin bodies based on potential theory MSC. Nastran is a typical application based on potential theory MSC. Natran can calculate the aerodynamic derivatives of the vehicle relatively well in the subsonic region, but in the supersonic region, the fuselage …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 14–24 Read article
-
AI-Assisted Optimization of Supersonic Airfoil Shapes Using CFD Coupling
Abstract: This paper presents a novel framework for optimizing supersonic airfoil geometries through integrated artificial intelligence and computational fluid dynamics coupling. Traditional gradient-based optimization methods for high-speed aerodynamic shapes suffer from computational expense and convergence difficulties in non-convex design spaces. The proposed methodology employs a deep neural network surrogate model trained on high-fidelity Reynolds-Averaged Navier-Stokes solutions to approximate aerodynamic performance metrics across the design space. A hybrid particle swarm-genetic algorithm searches …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 1, 2026 Read article
-
Aerodynamic Flow Separation Control Using Active Flow Devices
Abstract: Flow separation remains a significant challenge in aerodynamic applications, often leading to increased drag, loss of lift, and reduced efficiency in air and ground vehicles. This study investigates the use of active flow control (AFC) devices to mitigate flow separation and enhance aerodynamic performance. Active methods such as synthetic jets, plasma actuators, and pulsed blowing are examined for their ability to dynamically manipulate boundary layer behavior and delay or suppress …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Design And Analysis of Carbon Filler Reinforced Composite Small Wind Turbine Blades
Abstract: Although wind turbines have great potential for capturing wind energy, their blades suffer from unstable aerodynamic loads as a result of operating for extended time in challenging conditions. Both structural and aerodynamic performance are negatively impacted by these loads. The effectiveness of the wind turbine and the use of wind energy are significantly impacted by the choice airfoil. Commonly used airfoils include NACA 4412, NACA 23012, and SG6043. The lift …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 79–89 Read article
-
A Review on Evolution of Aircraft Fuselage Materials: From Wood to Composites & Functionally Graded Materials
Abstract: This article presents a comprehensive overview of the evolution of materials for construction of aircraft fuselages, with a focus on the expanding use of polymer composites and functionally graded materials (FGMs) in modern aerostructures. The baseline fuselage design is thought to be from wood, to be followed by metallic systems such as aluminum, titanium, and nickel alloys. All systems improved manufacturability, strength, and longevity, but there was a substantial revolution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 447–455 Read article
-
AI-Assisted Design and Theoretical Aerodynamic Evaluation of a Multistage Conical Diffuser Micro Wind Turbine Fabricated from Polymeric Composites
Abstract: The rising demand for compact, lightweight, and high-efficiency renewable energy systems has accelerated the development of micro wind turbines capable of delivering stable performance under low wind conditions. Traditional bare-rotor micro turbines suffer from limited aerodynamic efficiency, motivating the adoption of diffuser-augmented architectures and advanced polymer-based composite materials. This study presents the AI-assisted conceptual design and theoretical aerodynamic evaluation of a multistage conical diffuser micro wind turbine fabricated using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1111–1118 Read article
-
Computational Fluid Dynamics and Composite Material Study on Scoop-Type Savonius Turbine for Train-Based Energy Generation
Abstract: This study investigates the feasibility of integrating a scoop-type savonius vertical-axis wind turbine (VAWT) on the rooftop of a moving train to generate renewable onboard power. The motivation stems from increasing demands for sustainable energy solutions and reducing reliance on fossil fuels, particularly in transportation. A two-blade savonius turbine, with dimensions of 0.4 m in diameter and 0.5 m in height, was modeled in PTC Creo Parametric 3.0 and analyzed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 566–580 Read article
-
Design and Optimization of Radial Turbines for Waste Heat Recovery Applications
Abstract: Waste heat recovery (WHR) offers a compelling way to improve sustainability and energy efficiency in several different industrial sectors. In waste heat recovery (WHR) systems, radial turbines are essential because they capture waste heat and transform it into useful mechanical or electrical energy. A thorough summary of the design and optimization concepts guiding radial turbines for WHR applications is given in this review article. After outlining the basic concepts of …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 1, Issue 2, 2023 · pp. 52–58 Read article
-
Air Flow Analysis in Sensor-Based Aircraft Wings Design
Abstract: Airflow analysis, at its core, is an application of fluid mechanics principles to the specific study of air movement. Airflow analysis plays a crucial role in diverse fields, impacting everything from the comfort of our homes to the efficiency of jet engines. The pursuit of more efficient, safer, and more responsive aircraft wings is a constant driver of innovation in the aerospace industry. The quest for more efficient, safer, and …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 2, 2025 · pp. 29–39 Read article