Search
21 articles for “Acrylonitrile Butadiene Styrene”
-
Parametric Study of Fused Deposition Modelling Process During Fabrication of Acrylonitrile Butadiene Styrene (ABS) Based Injection Molding Die
Abstract: The purpose of this study is to dictate an optimum process parameter during the fabrication of additively manufactured acrylonitrile butadiene styrene (ABS) based injection mold using fused deposition modelling methodology based additive manufacturing process and to assess the quality of the infection mold by analyzing the surface roughness of the injection mold, and the time taken in the manufacturing of the mold. The ABS PRO+ filament is used in manufacturing …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 Read article
-
Experimental Study on Effect of Recycled Epoxy Powder Reinforcement on Tensile Behavior of Acrylonitrile Butadiene Styrene
Abstract: Thermosetting plastic found wider application in the field of Aerospace, Aircraft, Wind Turbines, Marine and construction due to their long life, light weight and high strength. Among thermosets, epoxy is the major contributor. The world epoxy resin usage is almost 3.6 million tons in the year 2022 and it may cross 5.91 million tons by 2029. At their end of life most of it goes to land filling which leads …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–315 Read article
-
Infrared Spectroscopic Studies on Multiwalled Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites
Abstract: AbstractFourier Transformed Infrared (FT-IR) Spectroscopic analysis is an effective technique to captures the response of the molecular motions such as stretching, bending and torsional vibrations of materials. In this study, FTIR analysis has been done on two different grades of multiwalled carbon nanotubes (MWCNT) C100 and NC7000. NC7000 grade MWCNT has a higher degree of crystalinity and shows 60% higher absorbance in the wavelength range of 600-3600 cm-1. These two …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 15–22 Read article
-
An Approach to Mathematical Modelling of Tensile Strength of 3D Printed ABS Specimens
Abstract: In the present work the tensile properties of 3D printed Acrylonitrile Butadiene Styrene (ABS) are studied. Layer thickness, raster angle and raster width were varied. Experiments were carried out based on Taguchi’s L9 orthogonal array. Tensile strength of ABS specimens was determined from universal testing machine (UTM). Mathematical model was developed to predict the tensile strength of ABS. It is found that the predicted model has good fit with experimental …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 1–9 Read article
-
DESIGN AND ADDITIVE MANUFACTURING OF SOFT CAPTURE DOCKING SYSTEM USING MR FLUID
Abstract: This paper emphasizes the development of Satellite docking system using Magnetorheological fluid. Docking is a mechanism where a space craft tends to adhere with another space craft or an international space station maneuvering on its own. Magnetorheological fluid is a smart material that is controllable using magnetic field. When a magnetic field is applied to Magnetorheological fluid its viscosity increases and becomes viscoelastic and the liquid state changes to solid …
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 3, 2018 · pp. 14–23 Read article
-
Structural Optimization of FDM-Processed ASA Polymer Frames through Acetone Solvent Welding, Variable Infill Strategy, and Layer Orientation: Experimental Validation via Quadcopter Flight Testing
Abstract: Acrylonitrile styrene acrylate (ASA) is an amorphous terpolymer with superior UV resistance compared to acrylonitrile butadiene styrene (ABS), as its acrylate rubber phase lacks photodegradation-prone carbon–carbon double bonds. This study proposes acetone solvent welding as a polymer joining method to produce monolithic structures from FDM-processed ASA components, addressing three processing challenges: achieving structural continuity through polymer chain interdiffusion at solvent-wetted interfaces, correcting thermal warping via post-print geometric correction during welding, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 689–703 Read article
-
Investigating the Combined Effect of FDM 3D Printing Parameters on Tensile Behavior of ABS Plastic Using Taguchi Method.
Abstract: Fused Deposition Modelling (FDM) is a commonly utilized method in additive manufacturing. FDM is greatly affected by its printing parameters, which is why selecting the proper parameters is crucial for obtaining the desired properties of 3D printed parts. In this paper we have experimentally and statistically studied the influence of FDM 3D printing parameters (infill pattern, infill density and layer thickness) on tensile strength using Acrylonitrile Butadiene Styrene (ABS) filament. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 161–169 Read article
-
Experimental Investigation of Various 3D Printing Materials for Making Travel Bag Wheels
Abstract: 3D printing is one of the emerging areas of manufacturing. Fused deposition modelling (FDM) is widely used 3D printing technique in various fields like jewellery, fashion, art and sculpture, medical, etc. In this paper, different polymer materials like ABS (Acrylonitrile Butadiene Styrene), PLA (Polylactic Acid), carbon fibre, PETG (Polyethylene Terephthalate), HIPS (High Impact Polystyrene), etc. were analysed for compressive strength by preparing standard specimens according to ASTM standard D695 to …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 1–7 Read article
-
Optimization of Process Parameters for FDM Printed Tensile Test Specimens to Reduce Energy Consumption and CO2 Emission for Sustainable Manufacturing
Abstract: Three-Dimensional Printing (3D Printing) is one of the advanced manufacturing technologies which is being tremendously used in many fields because of its innovative applications. The concept of making a three-dimensional product by adding the material layer upon layer through Computer Aided Design (CAD) file data as input source is known as 3D Printing. Fused Deposition Modelling (FDM) is one of the leading technologies from all the available 3D Printing technologies, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 63–71 Read article
-
Impact of Layer Height and Infill Line Orientation On 3D Printed Components Produced Via Additive Manufacturing
Abstract: Additive Manufacturing (AM) is an extrusion-based technique used to create objects by extruding semi-molten material through a nozzle of specific dimensions. Materials like acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), polycarbonate (PC), and others are commonly employed in this process to manufacture industrial components. The mechanical properties of engineering component are critical for various industrial applications. This study investigates the impact of additive manufacturing on fabrication, considering different process parameters. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 315–323 Read article
-
Development of 3D Printing Filaments from Industrial Waste Plastics
Abstract: The global plastic waste crisis has prompted innovative approaches to sustainable material reuse, particularly in additive manufacturing. Simultaneously, the accumulation of plastic waste presents significant environmental concerns. Recycling plastic into filament supports eco-friendly innovation and brings us closer to a circular economy where materials are reused instead of thrown away. This study investigates the development of 3D printing filaments from industrial waste plastics, including polypropylene (PP), acrylonitrile butadiene styrene (ABS), …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 1, 2025 · pp. 12–17 Read article
-
Comparative Analysis of 3D Printed Nylon and PETG Specimens for Mechanical Properties.
Abstract: Fused deposition modeling (FDM) is one of the most used additive manufacturing techniques for polymer components. The polymer materials generally used in FDM process are polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PETG), Nylon, etc. The mechanical properties of parts fabricated by FDM depend on material and process parameters. Several researchers have tried to investigate the influence of process parameters on mechanical properties for some of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 7–14 Read article
-
Modelling and Analysis of Morphing Wing Structure for Variable Camber
Abstract: This study explores the modelling and analysis of a morphing wing with variable camber configurations to observe its aerodynamic characteristics compared to conventional form. The morphing wing is the concept where the shape of the wing is altered mid-flight based on different phases of flight to improve its aerodynamic characteristics. Morphing wing structure designs such as the corrugated and FISHBAC designs were considered for this analysis. The NACA 2412 airfoil …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 209–224 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
Nano Shield-EV: Graphene and CNT-Infused Polymer Composites for Advanced EMI Shielding in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for lightweight, thermally stable, and mechanically robust electromagnetic interference (EMI) shielding materials to ensure the reliable performance of advanced electronic systems. Traditional metallic shields, though highly effective, increase vehicle weight and restrict design flexibility, thereby motivating the search for multifunctional polymer-based alternatives. In this study, NanoShield-EV introduces novel polymer nanocomposites fabricated via melt blending and compression molding, combining engineering-grade …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1036–1047 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Simulation and Experimental Studies on the Effect of Injection Moulding Parameters on Tensile Properties of ABS Thermoplastic Specimen
Abstract: AbstractThe injection moulding process is the most widely used method of manufacturing Engineering thermoplastics. Thermoplastic blends and composites are suitably replacing metals and ceramics in most circumstances. This trend is mainly due to the versatility and compatibility of the injection moulding process. However, the injection moulding conditions has a significant impact on the aesthetic and functional characteristics of the final product as the flow induces substantial variation in the properties …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 1–10 Read article
-
Assessment on the Physical Characteristics of Polymer Materials for Additive Layer Manufacturing Processes
Abstract: Polymer materials have the capacity to morph into a soft form and flow when heated, then return to their original hardness when cooled, making them excellent for heat fabrication procedures. Acrylonitrile Butadiene Styrene (ABS) is a high-grade polymer with exceptional mechanical qualities and heat resistance that is commonly used in aircraft and vehicle manufacture. These polymers are mixed with other materials to create alloys, which are primarily used in the …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 1–9 Read article
-
Design and Development of Extruder for Plastic Wastes
Abstract: Plastic waste has become one of the most significant environmental challenges due to its widespread use, non-biodegradable nature, and increasing accumulation in landfills and water bodies. The rapid growth in plastic consumption has created an urgent need for effective recycling technologies that can reduce environmental pollution while recovering valuable materials. Among the various recycling techniques, extrusion is considered an efficient and economical method for converting plastic waste into reusable products. …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 2, 2026 Read article
-
Parametric Effect on the Mechanical Property of Extrusion-Based 3D-Printed Parts
Abstract: Material extrusion-based 3D printing, a prevalent and economical approach for producing complex geometries, heavily relies on acrylonitrile butadiene styrene due to its advantageous mechanical properties and dimensional stability. Nevertheless, the mechanical integrity of 3D-printed components is considerably impacted by process variables. This research investigates the implications of critical parameters – layer height (LH), infill percentage (IP), and infill pattern design (IPD) – on the tensile, compressive, and flexural strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 160–170 Read article