Search
15 articles for “AR Glass Fibre”
-
Experimental Investigation of Mechanical Properties of AR Glass Fibre Reinforced Self Compacting Concrete
Abstract: The plain cement concrete has brittle in nature and low tensile strength. Self-Compacting Concrete (SCC) is an efficient choice in construction because of its inherent capacity to fill gaps and flow without the need for external vibration. The necessity of self-compacting concrete can be recognized by seeing the growing issue of a trained labour shortage in the building sector. The advantage of SCC is that it allows for an earlier …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 69–79 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load
Abstract: The present work gives details of adhesive characterization in lap joints under quasi static tensile failure load. Rivets are major threat for an aircraft structure because of high stress concentration at lesser area ease to failure and also causes drag in aerodynamic perspective. Researchers are searching for a different method to avoid the stress concentrations in lesser area. The use of adhesives instead of rivets is most feasible solution for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 96–103 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Experimentation and Investigation of E - Glass Fibre/ Polyester Composites Laminates
Abstract: This paper centres on the autoclave moulding technique, offering a comprehensive analysis of the specimen fabrication process. The advanced composite manufacturing process involves the use of high temperatures and pressures during the curing step. This results in composite specimens that have a higher density and are devoid of any voids. Polyester, E-glass fibre, and SiC powder are the material components that make up the composite in this study. It is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 477–487 Read article
-
Investigating the Functionality of Graphene Fiber Reinforced Plastic (GFRP) Laminates
Abstract: The increased adaptability and usefulness of glass-fiber reinforced polymer has led to its widespread adoption. GFRP laminates can be improved by including filler materials to improve their already impressive set of qualities. The demand for the research and development of advanced composites with enhanced properties has never been greater, and this is especially true for composites that are lightweight but have enhanced tensile and flexural qualities. An example of a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 6, 2023 · pp. 1–9 Read article
-
Low Velocity Impact Behaviour of Corrugated Foam Sandwich Panel
Abstract: Composite sandwich structures, renowned for their high flexural stiffness and low weight, are widely used across industries such as aerospace, automotive, and marine. However, their durability can be compromised by impact-related damages, which affect both the core and face sheets. This study explores the performance of corrugated sandwich panels compared to conventional designs under low-velocity impacts. Using a drop weight impact testing machine, panels made from polyurethane foam cores and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 79–99 Read article
-
Potential Applications of Ceramic Matrix Composites: Advancements, Benefits and Challenges
Abstract: Ceramic Matrix Composites (CMCs) are materials that mix or fuse ceramic fibres with a ceramic matrix to synthesize a composite/compound. CMCs may be manufactured from a range of ceramic materials, including carbon, carbon fibers, silicon carbide, glass ceramic, alumina, etc. The CMC’s final qualities are determined by its production method and the type of filler employed. Recent breakthroughs in CMC technology have resulted in considerable performance gains, making them suitable …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–107 Read article
-
Use of Geopolymer Composites for Controlling Structural Cracks
Abstract: A building’s safety and stability can be compromised by ignoring the potential structural issues indicated by occurring cracks in buildings. Extensive damage may cause over the period from unidentified cracks.Good quality concrete never cracks in normal service conditions unless high horizontal force is applied. Through the cracks, carbon dioxide is released into the concrete and speeds up carbonation throughout the cracks, thus reducing the structure usage. The materials which are …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 172–184 Read article
-
Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites
Abstract: The rate at which non-renewable resources are consumed increases, the research of using eco-friendly and sustainable materials has been in the spotlight lately. The companies from different industries are trying to find replacements for traditional synthetic materials to limit their environmental impact and promote sustainable eco-friendly initiatives. One such approach is the usage of natural fiber polymer composites as it provides a biodegradable and renewable structural alternative over traditional synthetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–11 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Critical Review on Basalt Fibre as Reinforcement in Different Applications
Abstract: Basalt fiber (BF), derived from volcanic rocks, has emerged as an attractive reinforcement material due to its remarkable properties, including high strength, stiffness, thermal stability, and eco-friendliness. This review critically examines the applications of BF as reinforcement in various fields, such as civil engineering, aerospace, automotive, and biomedical sectors. The performance of BF-reinforced composites in terms of mechanical, thermal, electrical, and biological properties is evaluated. The challenges and opportunities associated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 670–685 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article