Search
124 articles for “ABS plastic”
-
Investigating the Combined Effect of FDM 3D Printing Parameters on Tensile Behavior of ABS Plastic Using Taguchi Method.
Abstract: Fused Deposition Modelling (FDM) is a commonly utilized method in additive manufacturing. FDM is greatly affected by its printing parameters, which is why selecting the proper parameters is crucial for obtaining the desired properties of 3D printed parts. In this paper we have experimentally and statistically studied the influence of FDM 3D printing parameters (infill pattern, infill density and layer thickness) on tensile strength using Acrylonitrile Butadiene Styrene (ABS) filament. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 161–169 Read article
-
Reduction of Submerged Mark Defects in Injection Molding Method
Abstract: Because of overwhelming interest in plastic items, plastic businesses are developing in a speediest rate. Plastic infusion forming starts with shape making and in assembling of complex shapes. Ideal setting up of infusion forming process factors assumes an imperative part in controlling the nature of the infusion shaped items. It is all the most critical to control property abandons like sink marks. Sink marks are fundamentally a "planned in" issue …
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 2, 2018 · pp. 15–21 Read article
-
Optimal Abrasive Jet Machining Parameters for Glass Fiber Reinforced Plastics
Abstract: Abrasive jet machining (AJM) is a best choice for processing of glass fiber reinforced plastics (GFRP). Inherent to the nonlinear behavior of performance characteristics during repeated experiments are inevitable variations, attributed to measurement errors and unknown influencing input variables. This study employs the Taguchi method with an orthogonal array to systematically identify optimal input variables through a limited number of experiments. The paper introduces a direct and reliable Taguchi-based multi-objective …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 247–255 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Potential of Midrib of Cocos nucifera Leaf for Reinforcement of Plastics
Abstract: AbstractCoconut palm (Cocos nucifera) is an abundant crop of tropical areas. In the present work, mechanical properties of midrib of coconut palm leaf as tensile strength, tensile modulus, flexural strength, flexural modulus impact strength and elongation at break is experimentally determined and compared with other fibers. Single-fiber pull-out test is conducted to determine critical embedded length and interfacial adhesion between fiber and matrix for reinforcement in polyester resin. Tensile test …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 25–32 Read article
-
Various Methods For Plastic Waste Pyrolysis To Fuels: A Review
Abstract: The world's decreasing oil reserves and increasing energy demands are pushing experts to explore alternative ways of producing premium oils that can replace fossil fuels. Waste-to-energy recovery, which involves converting waste materials into energy, shows great potential for managing waste. Waste plastics, abundant and with a high combustion heat, are attractive for energy conversion. However, the vast use of plastic products, both industrially and domestically, leads to a surge in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 79–93 Read article
-
UTM Testing and Comparison of Mechanical Properties of Composite Material Specimens Manufactured using Fused Deposition Modeling
Abstract: 3D printing has become a popular way for prototyping of components instead of conventional methods due to quickly results obtained and a variety in properties of process possible. In this paper our aim is to elaborate on differences between strength and other Mechanical properties of abs plastic, carbon fiber + abs and glass fiber + abs filament for additive manufacturing. For this procedure for this research filament has been acquired …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 3, 2020 · pp. 37–43 Read article
-
A Review on Natural Fiber and its Hybrid Composite Plastic Materials
Abstract: AbstractNowadays human beings are facing problems related to plastic based pollution. Due to that, engineers are trying to reduce the percentage of plastic as much as possible without affecting the functionality of given plastic based product. Hybrid composite materials having ability to replace some amount of the plastic with natural material are being tried. In this paper, we try to discover the different natural fiber based hybrid composite plastic materials …
Published in Journal of Polymer & Composites · Vol. 4, Issue 1, 2016 · pp. 4–8 Read article
-
Development of 3D Printing Filaments from Industrial Waste Plastics
Abstract: The global plastic waste crisis has prompted innovative approaches to sustainable material reuse, particularly in additive manufacturing. Simultaneously, the accumulation of plastic waste presents significant environmental concerns. Recycling plastic into filament supports eco-friendly innovation and brings us closer to a circular economy where materials are reused instead of thrown away. This study investigates the development of 3D printing filaments from industrial waste plastics, including polypropylene (PP), acrylonitrile butadiene styrene (ABS), …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 1, 2025 · pp. 12–17 Read article
-
A Review on Hole Making in Carbon Fiber Reinforced Plastic Laminates
Abstract: AbstractThe existence of fiber reinforced plastic (FRP) laminates in the world since 1940s, and its application is till date growing continuously. The research papers published in this field focused on the manufacturing of laminates to its final uses. The FRPs can be manufactured by various processes, but its assembly of laminated product required a hole. Hole in laminate may be produced by means of conventional or unconventional machining. Major attention …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 44–51 Read article
-
Enhancing Worker Comfort in High-Heat Environments: A Triangular Bladeless Cooling Fan Approach
Abstract: Workers in high-heat industrial environments frequently encounter thermal stress, fatigue, and dehydration, which significantly impact both productivity and safety. Existing cooling solutions such as pedestal fans, ceiling fans, and central air-cooling systems often fall short due to limited airflow reach, safety concerns from exposed blades, high energy consumption, and poor suitability for dynamic workshop layouts. To address these challenges, this study presents a novel triangular bladeless fan designed specifically for …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 25–31 Read article
-
A Study on Stabilization of Black Cotton Soil Using Fly Ash and Plastic Fibres
Abstract: AbstractSoil stabilization is most important for the construction which is widely used in connection with road pavement and foundation construction because it improves the engineering properties of soil such as strength. Utilization of industrial waste materials in the improvement of soils is a cost efficient and environment friendly method. Stabilization of the expansive soil is studied by using fly ash and plastic fibres. The present investigation is to evaluate the …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 3, 2017 · pp. 11–18 Read article
-
Manufacturing of Fly Ash Bricks by Using Waste Plastic
Abstract: Fly ash is produced in significant quantities, especially by thermal power plants. Plastics are produced in vast quantities as the population grows. Waste management has become a major concern, especially the disposal of used plastic bags. The house is big and getting bigger. Each has major environmental consequences. Our project's major goal is to use those polymers and fly ash in the production of bricks. The fly ash bricks were …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 1–5 Read article
-
Parametric Optimization of Waste Plastic Fuel Parameters
Abstract: AbstractIn this article, the fuel production through waste polythene and plastic with the help of zeolite as a catalyst is presented. First of all, prepare a light steel airtight vessel on which there is a lid with a hole that is connected to long galvanized steel pipe. The container is filled ¾ with waste plastic and polythene at room temperature then the temperature is increased up to 300–450°C by using …
Published in Journal of Thermal Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 26–30 Read article
-
Improvement of Soil Characteristics Using Waste (plastic, steel and wood)
Abstract: ABSTRACTSoil stabilization is the process of altering the engineering properties. Soil properties would be altered by adding waste like plastic from beverage bottles, steel dust and wood waste. In present scenario disposal of plastic waste has become a major issue because plastic materials can take many years (above 400 years) for its decomposition and may cause severe damage to environment and human health. The problem which was associated with plastic …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 3, 2017 · pp. 7–10 Read article
-
Determination of Selected Essential (Copper, Zinc) and Non-essential (Lead, Chromium, Cadmium) Heavy Metals in Some Single-use Plastics from Sokoto Metropolis, Nigeria
Abstract: Background and objectives: The objective of this study is to conduct Atomic Absorption Spectroscopy Analysis of selected essential (Cu, and Zn) and non-essential heavy metals (Cr, Cd, and Pb) in selected different single-use plastics that are in contact with food from Sokoto, Nigeria. Methods: The levels/concentrations of heavy metals in plastics were determined using atomic absorption spectroscopy. Findings: Copper levels range of 0.05000.001 to 0.90100.001 (ppm), while zinc levels are …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 29–37 Read article
-
Expansive Soils and Identification Methods
Abstract: Expansive soil is a well-known type of difficult soil. It can cause critical damage to civil engineering facilities. The unfavorited physical, mineralogical, and engineering characteristics are the main reasons for the difficult nature of expansive soil. Understanding specific parameters and properties of expansive soil are important to categorize and identify swell potential. Furthermore, reviewing the most useful methods for identifying and measuring the expansive soil characteristics may help the engineer …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 2, 2022 · pp. 39–37 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Biodegradation of Plastic Waste Using Various Fungal Isolates from Plastic-Polluted Sites in Meerut: Analysis of Polymers and Composites
Abstract: By isolating microorganisms from a dumpsite containing low-density polyethylene (LDPE), the potential for microbial decomposition of plastic waste was studied. Four different strains of Aspergillus niger (fungus) were identified and used to biodegrade plastic waste. The isolated fungal strains included Aspergillus niger, Alternaria, A. fumigatus, A. flavus, and A. luchuensis. Predominant fungal strains, Aspergillus niger and Alternaria, were selected for polyethylene degradation under laboratory conditions. In a controlled shaker culture, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 184–197 Read article
-
Polystyrene Plastic Waste into Liquid Fuel Using Silica-Alumina Catalyst, Extracted from Rice Husk
Abstract: Catalytic Pyrolysis of Polystyrene (PS) into fuel like products using silica alumina catalyst that was extracted from rice husk was investigated over temperature range of 430–470°C. The output of catalytic pyrolysis was liquid oil, solid residues (char) and gaseous fraction. The product yields as a function of temperature, time and catalyst amount were studied. High conversion of liquid (48.8%) was achieved at 430 and 450ºC in the presence of 12.5 …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 15–31 Read article