Search
346 articles for “ZnO/PVB nanocomposite films”
Nothing matched all of your words, so these match any of them.
-
A Review on The Role of Nanoparticles in Modifying Mg Alloys and Composites
Abstract: Reviewing and assessing magnesium's uses in the automobile sector, which have the potential to greatly improve fuel efficiency and environmental preservation, is the goal of this study. The report provides an overview of magnesium alloys' present benefits, drawbacks, technological obstacles, and future prospects in the automobile sector. The development of magnesium matrix composites has advanced to a new level thanks to the magnesium matrix nanocomposites' exceptional mechanical qualities. Dispersing nanoparticles …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 24–32 Read article
-
Synthesis And Application of Nano Zinc Oxide in Fabrication of Rubber Composites
Abstract: Nano zinc oxide (ZnO) has garnered significant attention in recent years due to its unique properties and potential applications in various fields. This paper discusses the synthesis of nano ZnO by precipitation method and characterizes them with various techniques such as X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Fourier Transform Infra-Red (FTIR) Spectroscopy and explores its application in the preparation of rubber composites. These synthesized particles were measured to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 1–10 Read article
-
Exploring Polymer Biocomposite as a Sustainable Filter for Water Treatment
Abstract: The present study explores the utilization of polylactic acid (PLA), a renewable polymer combined with surface-modified nanocellulose (SMNC), and pectin derived from Borassus flabellifer leaves and fruits respectively. Existing methods of filtration are synthetic and affect the environment and public health at an alarming rate thereby making biopolymer-based membranes a greener and effective approach for water treatment. PLA-SMNC-pectin biofilm was fabricated using 88.5 mg PLA, 3.5% (wt. % of PLA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 594–608 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
Nano Shield-EV: Graphene and CNT-Infused Polymer Composites for Advanced EMI Shielding in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for lightweight, thermally stable, and mechanically robust electromagnetic interference (EMI) shielding materials to ensure the reliable performance of advanced electronic systems. Traditional metallic shields, though highly effective, increase vehicle weight and restrict design flexibility, thereby motivating the search for multifunctional polymer-based alternatives. In this study, NanoShield-EV introduces novel polymer nanocomposites fabricated via melt blending and compression molding, combining engineering-grade …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1036–1047 Read article
-
Interfacial and Tribo-Mechanical Performance of a TiO₂–Castor Oil Polymeric Nanofluid During Sustainable Machining of AISI 316L Stainless Steel Under MQL Conditions
Abstract: This research examines the tribo-mechanical performance and interfacial film characteristics of a TiO₂-reinforced castor-oil polymeric nanofluid during the turning of AISI 316L stainless steel under minimum-quantity lubrication (MQL). A Taguchi L9 orthogonal array was utilized to assess the synergistic effects of cutting speed, depth of cut, and coolant composition on surface integrity, while machining experiments were performed under dry, conventional, and TiO₂-nanofluid lubrication techniques. ANOVA and multiple-regression modeling were used …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 901–914 Read article
-
Optimization of gas sensitivity of CuO/carbon composites with carbon particles synthesized from acacia auriculiformis branches
Abstract: Carbon particles fabricated from the core of acacia tree branches were utilized to synthesize CuO/carbon composite films. The gas sensing properties of these films grown on glass substrates using the doctor blade method were measured in 1000 ppm of methanol vapor at the room temperature. All the films were annealed at 75 0C for 1 hour in air. The structure, the optical band gap and the surface morphology of the …
Published in International Journal of Membranes · Vol. 1, Issue 1, 2024 · pp. 22–30 Read article
-
Polymer Use in Soilless Farming Systems with A Comparative Study on Hydroponics and Aquaponics
Abstract: Hydroponics and aquaponics are innovative, sustainable agricultural methods that achieve high productivity with minimal land and water usage in controlled environments. Hydroponics, a technique that involves growing plants in nutrient-rich water solutions, utilizes various polymer-based components. Aquaponics, a symbiotic system combining aquaculture and hydroponics, also relies on polymer-based materials. These soilless techniques are crucial for producing vegetables, fruits, and other crops without relying on soil, allowing adaptability across various locations. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 868–874 Read article
-
Improved Cooling Effectiveness in Radiators and Heat Exchangers with Nanofluid-Based Technology
Abstract: This study discusses how the process of heat transfer in radiators and heat exchangers can be improved using nanofluids and analysis of computational fluid dynamics. These nanofluids comprise Al₂O₃ and ZnO dispersed in water-based ethylene glycol solutions, and graphene oxide dispersed in water-based solutions, and performance evaluation was done for the range of flow rates 180–420 l/h. And a 3D CAD model was created using the ANSYS Workbench. It was …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 31–62 Read article
-
Exploring the Luminescent Behavior of Dysprosium-Doped Halo-sulphate Compounds
Abstract: In essence, this study aims toward understanding the photo-luminescent properties of Dy³⁺ halogenated sulfates, viz., synthesis, characterization, and luminescent behavior of the materials. Dysprosium ions are introduced into the halo-sulfate matrices to investigate their suitability for solid-state lighting applications. The aim of the study is to explain the mechanisms of the photo luminescence of Dy³⁺ and study the influence of the doping concentration on luminescence efficiency and the thermal stability …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 01–06 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article
-
Characterization of Antibacterial and Biofilm Inhibition in Tin and Zinc Oxide Nanoparticle-Doped Orthodontic Composites
Abstract: Background: This study investigated the antibacterial effectiveness of orthodontic adhesive enhanced with stannous oxide (SnO₂) nanoparticles against Lactobacillus acidophilus and Streptococcus mutans, in comparison to traditional adhesives without nanoparticle infusion. Methods: A modified orthodontic adhesive was prepared by incorporating 1% w/w of tin dioxide and zinc oxide nanoparticles (SnO₂ + ZnO₂ NPs) into Transbond XT. This nanoparticle-enhanced composite was used to fabricate discs for assessing antibacterial activity against Lactobacillus acidophilus …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 230–239 Read article
-
Synthesis and Characterization of Graphene-Based Hydroxyapatite Using Hydrothermal Method for Its Biomedical Application
Abstract: Developing bone implant materials that combine biological compatibility with mechanical strength remains a major challenge in orthopedic research. Hydroxyapatite (HAp) closely mimics bone mineral and supports cell growth, but its brittleness limits load-bearing applications. To address this, a quaternary nanocomposite of hydroxyapatite (HAp), graphene (Gr), zirconia (ZrO2), and ferrocene (Fc) (Hap-Gr-ZrO₂-Fc) was synthesized through a one-step hydrothermal process. Graphene and zirconia provided reinforcement, while ferrocene contributed structural stability and carbon …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 120–135 Read article
-
Next-Generation Membrane Materials: Advances, Applications, and Challenges
Abstract: Advanced membrane materials are better than regular polymers because they are more selective, permeable, and stable. New developments in nanomaterials, composite membranes, and surface engineering are making it possible to do more with water purification, gas separation, biomedical applications, and energy systems. Membrane technologies have become important tools in many areas, including biomedicine, energy systems, gas separation, and water purification. Recent progress in material science has made it possible to …
Published in International Journal of Membranes · Vol. 2, Issue 2, 2025 · pp. 19–28 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Nanostructure-Induced Thermoelectric Enhancement in Bi₂Te₃ Nanorods Design, Analysis, and Performance Evaluation
Abstract: Thermoelectric materials capable of efficient energy conversion near room temperature are critical for waste heat recovery applications. In this work, solution-grown Bi₂Te₃ nanorods were synthesized via a trioctylphosphine-assisted thermal decomposition route, and the influence of surfactant-induced nanostructuring on their thermoelectric properties was systematically investigated. Structural analysis using X-ray diffraction and Rietveld refinement confirmed the formation of rhombohedral Bi₂Te₃ with the emergence of Bi₂Te₃–BiTe nanocomposites at higher surfactant concentrations. Electron microscopy …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 34–44 Read article
-
Exploration of Diverse Epoxy-Based Surface Coating Methods for Enhancing Anticorrosion Characteristics
Abstract: Epoxy-based polymers, commonly referred to as polyepoxides, constitute one of the most versatile and widely adopted categories of polymeric materials due to their exceptional structural, mechanical, and chemical characteristics. Their unique macromolecular framework enables strong interfacial bonding, high mechanical stability, and superior resistance to environmental and chemical degradation, positioning them as advanced alternatives to many traditional organic corrosion inhibitors that often fail under prolonged exposure to aggressive conditions When polyepoxides …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 167–177 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Comparative Assessment of Polymers and Composites for Solar Panels: Fundamentals, Performance Metrics, Manufacturing, and Sustainability
Abstract: This paper presents a comprehensive review of the main types of Photo Voltaic polymers and composites such as crystalline silicon (both mono- and poly-Si), thin-film tech (CdTe, CIGS, a-Si), perovskites, and organic/dye-sensitized cells and analyses the parameters such as efficiency, fill factor, open-circuit voltage, temperature response, and degradation. The analysis focusses on polymers and composites and manufacturing techniques like vapor deposition, roll-to-roll printing, and both solution and vapor techniques for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 120–130 Read article
-
Viscoelastic Behavior, Interfacial Mechanics, and Reliability of Polymer Interlayers in Laminated Glass Composites: A Comprehensive Review
Abstract: The laminated glass systems are regarded as hybrid polymer–glass composites where the viscoelastic behavior of polymer interlayers mostly controls mechanical response. These interlayers (polyvinyl butyral (PVB), ionoplast, ethylene-vinyl acetate (EVA), etc.) have time-, temperature- and rate-dependent properties which significantly affect shear transfer, energy dissipation, and fracture resistance. But the baseline polymer-relevant processes at the molecular and interfacial level are to a large extent unknown [1]. This review provides a materials-focused …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 258–268 Read article