Search
1957 articles for “1.25Cr-0.5Mo.” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Experimental Investigation of Different Type of Soils with Addition of Geofibers
Abstract: Strength is important factor for stability of structure tо meet sрeсified engineering requirements оf sоil аnd to mаke it mоre stаble. For this purpose, certain engineering рrорerties are required tо be altered/changed. Based on the literature available, In the present study, аn exрerimentаl investigation is undertаken tо investigаte the effeсt оf addition of geofibers in different proportions (0.0-2.0% by weight) with two fiber lengths of 6 mm and 12 mm …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 2, 2021 · pp. 13–20 Read article
-
Experiment and calculation of vertical bearing capacity of large diameter belled pile
Abstract: Purpose–This paper aims to analyze the vertical bearing behavior of large diameter belled pile by carrying out static load test. Various calculation methods are used to calculate and determine the ultimate bearing capacity of large diameter belled pile.Design/methodology/approach–(1) According to the calculation method of allowable bearing capacity of single pile, the design ultimate bearing capacity of test pile and the load classification of loading and unloading are obtained. (2) Q-S …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 2, 2022 · pp. 1–21 Read article
-
Dynamic Characteristic of Permanent Magnet Assisted Self Excited Synchronous Reluctance Generator
Abstract: AbstractThe use of self-excited synchronous reluctance generator is gaining interest due to its simplicity and inexpensiveness in terms of manufacturing. The problem of this machine which is best suited in a standalone application is that it has poor power factor. This paper presents a comparative study of a PM assisted synchronous reluctance generator with a regular reluctant generator. The machine was studied using rotor rotating frame and embedded MATLAB was …
Published in Journal of Instrumentation Technology & Innovations · Vol. 10, Issue 1, 2020 · pp. 1–11 Read article
-
Textile Antenna with Partial Ground for Multiband Applications
Abstract: AbstractIn this article, the dominant textile antenna is presented. The proposed antenna has various applications like satellite communication, military and medical applications. The proposed antenna gives dual frequency bands with bandwidth from 8.96 to 14.456 GHz with 46.73% and second band from 14.98 to 17.46 GHz with 15.289. The intended textile antenna is applicable for wireless communication systems as it has wide dual bandwidth and high directivity of 6.379 dBi.Keywords: …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 3, 2017 · pp. 15–18 Read article
-
A CPW Fed Inverted E-Shape Microstrip Patch Antenna for Multi Band Applications
Abstract: In this paper a CPW fed multi band monopole antenna with inverted E-shape micro strip patch is presented for radar/satellite applications. Ansys soft HFSS simulator is used to simulate the antenna in this paper. The proposed antenna consists of inverted E shape patch including finite ground CPW feeding. The antenna is fabricated on 1.5 mm FR4 substrate which has dielectric constant of 4.4 and loss tangent of 0.02. The operating …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 26–35 Read article
-
Solidification Curve Analysis of Cylindrical Casting by FEM
Abstract: In casting process, molten metal is solidified in mould cavity. Solidification process majorly classify into three different sections: (i) liquefaction (ii) solidify (iii) after solidification. In all three processes, one parameter which is called 'IHTC' (Intermediate Heat Transfer Coefficient), is varies with time. IHTC coefficient depends on shape, size, type of casting etc., so, it is continuously varies with all dependent functions. So, establishment of IHTC value is a very …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 3, 2016 · pp. 44–49 Read article
-
Electrochemical Recovery of MnO2 from Spent Alkaline Batteries
Abstract: In the alkaline batteries of Zn/MnO2, the electrolytic manganese dioxide (EMD) is used as cathode that constitutes a very important part of household waste which contributes with heavy metals to the solid urban waste. This paper described the recovery of EMD by electro-oxidation on carbon cloth in acidic leached liquors from spent alkaline batteries. The maximum extraction for Mn and Zn were 43.68% (0.744 molL-1) and 56.11% (0.7321 molL-1) respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 9–16 Read article
-
Effect Analysis of Different ETL Layer Thickness in Perovskite (CH3NH3PbI3) Solar Cell Using CuSCN as Hole Transport Layer
Abstract: Thickness of Electron Transport Layer (ETL) shows an important role in terms of stability and efficiency of perovskite solar cells. In this paper, numerical simulation and detailed modeling on perovskite solar cell was carried out using perovskite material such as methyl ammonium lead iodide (MAPbI3, MA= CH3NH3) at various thickness’s of ETL layer using the SCAPS tool. The electrical properties of the “MAPbI3 material” used as active layer for different …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Six Quark Cluster Formation Effects on the Magnetic Moments of Mirror Nuclei with Closed Core+One Nucleon
Abstract: AbstractThe magnetic moments of mirror nuclei with closed core+one nucleon with A=13, 17, 29, 33, 41 (13C6~14N7, 17O8~17F9, 29Si14~29P15, 33S16~33Cl17, 41Ca20~41Sc21) have been estimated in the framework of hybrid quark model. The correction to the magnetic moment due to the six-quark cluster formation effects as estimated in the present work are compared with various other corrections. It is observed that the quark cluster formation effects make a sizable contribution to …
Published in Journal of Nuclear Engineering & Technology · Vol. 7, Issue 2, 2017 · pp. 12–19 Read article
-
Electrical Conductivity and Antibacterial Studies on Chemically Synthesized Poly (2-Methyl Aniline-co-2-Chloro Aniline)-Blend-Polyurethane
Abstract: AbstractElectrically conducting copolymer blend, poly (2-methyl aniline-co-2-chloro aniline)-blend-polyurethane has been synthesized chemically by oxidative polymerization technique using 0.3 M ammonium persulphate (APS) as oxidant, 0.1 M of the anionic surfactant, sodium lauryl sulphate and 1 M HCl as dopant. The formation of the copolymer blend has been confirmed by comparison with the spectral data obtained for the copolymer which was synthesized under the same conditions and characterized. The copolymer blend …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 7–14 Read article
-
Estimation of Mechanical Properties of Kevlar/Basalt Intrawoven Composite Laminates Containing Nanoparticles
Abstract: Purpose: The research describes estimation of various Mechanical properties like compression, tensile, shear and impact strength of Kevlar/Basalt (KB) Intrawoven 1×1 composite laminates, each comprising 1%, 3% and 5% of Al2O3 (Aluminium oxide) nanoparticles. Design/methodology/approach: These are woven with the help of manual handloom weaving machine, compression moulding technique was adopted for the fabrication of hybrid composite laminates. Attempts have been made to analyse the mechanical properties of Kevlar/Basalt intrawoven …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 1–12 Read article
-
Production of Alum from Aluminium Drink Cans Waste for Water Treatment
Abstract: The graphite furnaces atomic absorption spectrophotometry (GFAAS) technique has been previously used to quantify the aluminium (Al) content in soft drinks made from aluminium cans over the course of a 12-month storage period. The current research aimed to determine the efficacy of alum obtained from waste soft drink cans compared to the alum obtained from local markets in treating water from Shatt al-Arab, Basrah, Khorramshahr, and Abadan, Iraq. The Shatt …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 102–109 Read article
-
Prediction of Process Parameters of Friction Stir Welding Using Artificial Neural Network
Abstract: In this paper an artificial neural network (ANN) approach is used to predict the process parameters of friction stir welding (FSW). Initially, the experiments are conducted using the design of experiment (DoE) approach on FSW using L27 orthogonal array. The experiments are conducted using speed, feed, and tool tilt angle as input parameters for DoE and tensile strength, hardness, and ductility as output. ANN is created having 25 neurons and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 13–25 Read article
-
Evaluating the Mechanical Attributes of Flexible Polyurethane Foam Produced at Various Pressures
Abstract: This study explores the impact of different pressures (1atm and 0.75atm) on the mechanical characteristics of flexible polyurethane foam, employing varied compositions (0 - 40ppw) of CaCO3. Foam production occurred under two distinct pressure conditions: vacuum pressure and atmospheric conditions. Mechanical properties, including durability, compression set, resilience, support factor, elongation, hysteresis loss, bounce characteristics (including number of bounces), hardness, thickness loss value, elongation percentage, and tear resistance strength, were quantified …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 59–74 Read article
-
Supercapacitor-Battery Hybridization to Prevent Battery Life for Pulsed Load Applications
Abstract: Management of power in the pulsed load applications has become a significant issue when it comes to the battery backup systems. For the pulsed load applications, deep discharge of the battery and battery health problems are very well known. In this paper, an attempt is made to overcome these key challenges by connecting a high power density device, ultracapacitor (super capacitor) in parallel with the battery. The role of ultracapacitor …
Published in Journal of Power Electronics and Power Systems · Vol. 8, Issue 1, 2018 · pp. 1–15 Read article
-
Small Scale Horizontal Axis Wind Turbine
Abstract: In this work, the performance analysis of a designed small scale horizontal axis wind turbine (HAWT) has been presented and optimized by varying span length and chord length. The HAWT blades are shaped to generate maximum power from the wind at minimum cost. The blades are designed by using QBlade software and simulated in blade element method (BEM).The values of tip speed ratio and power coefficient have been obtained as …
Published in Journal of Power Electronics and Power Systems · Vol. 4, Issue 3, 2014 · pp. 26–32 Read article
-
New Integral Processes Enrichment of Moroccan Oil Shale using Mineral and Hydrometallurgical Methods
Abstract: In this work, we increase the calorific value of Moroccan oil shale, which is the main element in the combustion of fossil fuels. In particular, we consider the shale of Timahdit, enriching it by hydrometallurgical and mineral processing methods in order to use it to generate thermal and electrical energy. Although different studies have been conducted for the development of Moroccan oil shale, but they have not dealt with the …
Published in Journal of Petroleum Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 28–36 Read article
-
Diesel Adulteration Detection Using Gaseous Vapor Emission
Abstract: Diesel adulteration is the illegal or unauthorized introduction of foreign substances into pure diesel,causing the product to not conform to the requirements and specifications for use in the Oil and GasIndustry. Current methods to detect diesel adulteration require chemical laboratory experiments tomeasure parameters such as density, API gravity, viscosity, flash point, and evaporation point. Thesemethods require specialized, expensive equipment and cannot be utilized be quickly and readilyemployed at point of …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 69–76 Read article
-
The Application of Python Programming Language in the Automation of a Mathematical Model for Well Trajectory Selection Optimisation for a Given Field
Abstract: Directional drilling plays a major role in the exploration and recovery of hydrocarbons. There are three basic trajectories that a well may follow. They include; Build-and-Hold, Build-Hold-andDrop and Continuous-Build Trajectories. The selection of a trajectory is usually based on experience/trial and error approach and may be associated with errors. This work has therefore developed a mathematical model that optimised the automatic selection of a well trajectory type for a given …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 1–9 Read article
-
Evaluation of Mechanical Properties of Hybrid Fibers in Concrete
Abstract: Engineering Cementitious Composites (ECC) is an advanced growing method to increase the longevity of the structure in all behaviour aspects. ECC consist of cement, fine aggregate, fiber and water.High performance, ductility and durability of cementitious matrix can be achieved by addition of fiber. Nowadays, the member of fibers play a vital role to increase the overall structural behaviour of concrete matrix. In that, synthetic-based fibers are used in various applications. …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 1–5 Read article