Search
781 articles for “voltage (V)”
-
Experimental and Simulated Analysis of Hybrid Auxiliary Energy Storage System for Electric Vehicles
Abstract: Electric mobility contributing to greater extent to balance the energy and power demands, energy storage unitsas well as environment safety for current automobile sector. Electric vehicle has major efficient features of zerocombustion, longer charging and discharging cycle which plays a vital role to replace the ongoing increase in price ofpetroleum fuels and its harmful effect son environment with their degrading store. Many non-conventional energysources like solar, tidal, wind etc. Can …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 1, 2023 · pp. 23–40 Read article
-
Adaptive Neuro-Fuzzy Inference System (ANFIS) Control for Total Harmonic Distortions Reduction of Multi-Pulse STATCOM
Abstract: In this paper proposed ANFIS System is adapted for controllable mitigation of Total harmonic distortions of STATCOM with Multiple pulse technology. Integrated power electronics device, Gate Turn Off (GTO) is used in switching mode with Voltage source convertor during application of distinct load conditions. The proportional and integrated Controller is replaced by a smart fuzzy logic controller that offers great support for harmonic mitigation by redefining the electrical magnitudes of …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 2, 2022 · pp. 17–31` Read article
-
Simulation of Electrostatic Microactuator with Two-Sided Electrodes
Abstract: Microcantilevers are the basic MEMS structures, which can be used as both sensors and actuators. The objective of this work is to study the concept of two-way deflection of the cantilever due to applied voltage and the ground. The proposed work is carried out by using Comsol/Multiphysics software which is based on the finite element method (FEM). The proposed work is modeled and simulated by selecting electromechanics as the physics …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 10–15 Read article
-
Investigations on Piezoactuator-Based Active Vibration Isolation for Tool-Based Micromachining Applications
Abstract: Stacked piezoactuators are suitable actuators for active vibration isolation systems due to their high stiffness and fast response. However, they exhibit hysteresis nonlinearity between applied voltage and the resulting displacement. In this paper, Bouc-Wen model is used to model the hysteresis nonlinearity of stacked piezoactuator. The model parameters are estimated from the experimental voltage-displacement data of a stacked piezoactuator using “Trust-region nonlinear least square method” in MATLAB Simulink. The resulting …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 41–49 Read article
-
Harmonic Mitigation in Shunt Active Power Filter Regulation Approaches with Synchronous Reference Frame: An Extensive Analysis
Abstract: The Shunt Active Power Filter (SAPF) is discussed in this work as a means of removing line-side current harmonics. The Voltage Source Inverter (VSI) topology serves as the foundation for the Active Power Filter. It resolves the power system's harmonic current issue. Additionally, it balances the load on three phases and compensates for reactive power (if load is unbalanced). After measuring load current, it switches to the dq0 coordinate system. …
Published in Journal of Microcontroller Engineering and Applications · Vol. 10, Issue 3, 2023 · pp. 6–15 Read article
-
Gain Enhanced 2.4 GHz Slotted Rectangular Microstrip Patch Antenna with FR-4 Epoxy Substrate
Abstract: Applications that use the Internet of Things (IoT) must be combined with wireless networking technologies. This makes it easy to get to the application data. The wireless communication system is a key part of the infrastructure for the Internet of Things. It acts as a bridge for two-way connections to gather data and send control messages. In this work, HFSS software is used to create a rectangular microstrip patch antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 20–26 Read article
-
Response Surface Modelling of Energy Harvester
Abstract: This paper explains the application of response surface methodology on piezoelectric circular disc transducer by considering the three independent variables such as voltage constant, applied force and the total thickness of circular transducer. The dependent variables are voltage and power. For optimizing the voltage and power through energy harvester parameters such as voltage constant, total thickness of transducer plays a main role. The maximum voltage is recorded as 0.161 V …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 1, 2017 · pp. 1–6 Read article
-
High Gain High Efficiency Single Switch DC–DC Converter for Green Power Source Conversion
Abstract: Efficiency of solar cell is very low and it is preferred to be operated at low voltages; so it is difficult to supply power to a certain load. Conventional boost converter offers limited gain. So a high voltage boosting is needed. Proposed converter consists of coupled inductor and switched capacitor technique to achieve high gain without high duty ratio and turns ratio. In the magnetic field of coupled inductor and …
Published in Journal of Power Electronics and Power Systems · Vol. 8, Issue 3, 2018 · pp. 46–56 Read article
-
Closed Loop Control of Multi Level Inverter Tied with 415 V AC Source Using SV-PWM for Renewable Energy
Abstract: In this work, 415 V AC source is interfaced with three-level diode clamped inverter in which renewable energy source is used as a DC source, solar energy is used which is most popular renewable energy source. The obtained DC from the solar irradiation is fed to MPPT (Maximum Power Point Tracking) to utilize voltage at maximum power (DC). The perturb and observe technique is used in this work to track …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 1, 2016 · pp. 55–65 Read article
-
The Electromagnetic Transients in Mixed Power Networks with Partial Undergrounding
Abstract: This paper deals with the electromagnetic transients in partially undergrounded mixed high voltage power networks. These networks can include several cable sections replacing parts of the overhead transmission lines. The analysis yields the transient voltage and current distributions along the normal and the partially undergrounded lines. Moreover, the results can indicate eventually existing localized voltage and current concentrations within the network. The study suggests an exact direct analytical distributed parameter …
Published in Journal of Power Electronics and Power Systems · Vol. 7, Issue 2, 2017 · pp. 1–13 Read article
-
Extended Switched Inductor Quasi Z Source Inverter for Photovoltaic Applications
Abstract: A novel extended switched inductor quasi Z source inverter is proposed in this paper for better voltage boosting with improved power factor and reliability. The operation of the proposed inverter is described with its equivalent circuit explaining operating states such as shoot through and non-shoot through states and outlining the relationship between output voltage, total harmonic distortion and power factor. Simple boost scheme is used for switching actions of the …
Published in Journal of Power Electronics and Power Systems · Vol. 7, Issue 2, 2017 · pp. 14–23 Read article
-
The Transient Response and Frequency Characteristics of Power Transformers having Non-uniform Winding Insulation
Abstract: This paper presents a Laplace-domain distributed-parameter technique for analyzing the transient and frequency response of power transformers having non-uniform winding insulation. Stronger winding insulation near the windings source side terminals is usually applied in order to mitigate the concentration of the transient voltage stresses close to these locations. This will result in a location-dependent inter-turn capacitance distribution. The suggested procedure for analyzing such windings is based on the cascade connection …
Published in Journal of Power Electronics and Power Systems · Vol. 4, Issue 1, 2014 · pp. 37–52 Read article
-
The Time and Frequency Response of Shielded Transformer Windings
Abstract: A distributed-parameter model is presented for the transient and frequency analysis of power transformers’ windings in the presence of electrostatic shielding, a technique occasionally applied for improving their initial voltage distribution. The s-domain solution takes into account the windings’ circuit parameters with special emphasis on the additional distributed capacitances between the windings’ conductors and the conducting shield which is connected to the windings’ line terminal. The closeness of the resulting …
Published in Journal of Power Electronics and Power Systems · Vol. 4, Issue 2, 2014 · pp. 33–47 Read article
-
Control of a Grid-Connected Variable Speed Permanent Magnet Synchronous Generator Based Wind Power Generation System
Abstract: Variable speed wind turbines are more efficient compared to their fixed speed counterparts since maximum power is extracted over a wide range of wind speeds. In this work a grid-connected wind power generation system is modeled and implemented in Matlab/Simulink using a permanent magnet synchronous generator. A back to back space vector pulse width modulated voltage source converter converts the variable frequency generator currents and voltages into DC, then back …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 2, 2016 · pp. 8–24 Read article
-
Characterization of Low Power-Low Jitter Digital PLL
Abstract: The architecture design is being done in transistor level and tool which supports transistor level design. Mentor Graphics Tool is used for transistor level design and its simulation design. There are few tools which support design simulation like HSpice, Spectre and PSpice. Also a foundry support is from Taiwan Semiconductor Manufacturing Corporation (TSMC) (i.e.) technology model files 180 nm from TSMC for simulation. This article presents design for 1.5 GHz …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 2, 2018 · pp. 23–32 Read article
-
Comparative Analysis of High Speed Comparator for A to D Converters
Abstract: In this paper dynamic comparator along with the output buffer stage has been introduced. The simulation is carried out in 130 and 90 nm technologies. The supply voltage for 130 nm is 1.3 V and for 90 nm is 0.9 V. Different analyses for various characteristics of the comparator such as ICMR, delay, offset voltage and power dissipation is carried out in 130 and 90 nm CMOS technology. The comparator …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 4–10 Read article
-
Design of Energy Efficient Clock System
Abstract: Energy efficiency is a key metric for energy constrained Ultra Low Power (ULP) VLSI applications such as wireless sensor nodes, pace makers, hearing aids etc. These applications need clock system in their signal processing and communication sub-system. Moreover, clock system plays a vital role in governing the reliability, power consumption and performance of synchronous system. In today’s era of portable electronics, power consumption has emerged as a forefront design metrics. …
Published in Journal of VLSI Design Tools and Technology · Vol. 9, Issue 2, 2019 · pp. 1–7 Read article
-
Switched Capacitor-based RC Filter
Abstract: Today we know that the demand of low voltage for low power integrated circuits (ICs) are used for growing the portable equipment in all the markets including telecommunication, computers and customer electronics with smaller size. The low voltage need for ICs is also motivated by the new dip submicron complementary metal oxide semiconductor (CMOS) technology scaling that required all transistors of smaller size. In current years, a lot of researches …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 1, 2016 · pp. 32–40 Read article
-
Implementation and Simulation of High-Speed Dynamic Latch Comparator for ADC
Abstract: As per emerging issues in analog-mixed signal (AMS) design towards high-speed and low power, limits the performance of high-speed applications. Circuit complexity, speed, offset voltage and resolutions are essential parameter of comparator that affects the analog-to-digital converter (ADC) performance. Based on specifications, to achieve lower offset voltage and higher load drivability of latched comparator is presented. Moreover, the circuit is able to reduce power dissipation as the topology is based …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 2, 2016 · pp. 99–103 Read article
-
Analysis of Six-Pulse Bridge Circuits Including Zener and Semiconductor Diodes – Part Two
Abstract: The present study offers a generic method for simulating and modelling six-pulse rectifier bridge circuits in the time domain. These circuits can include Zener and/or semi-conductor type diodes or even a mixture of them. The governing system of simultaneous algebraic and differential equations are listed and solved numerically using a computer code written in Mathematica. The flexibly written program can handle voltage sources of any time waveform, frequency or internal …
Published in Journal of VLSI Design Tools and Technology · Vol. 12, Issue 2, 2022 · pp. 13–21 Read article