Search
428 articles for “tensile”
-
Mechanical & Tribological Characterization of Al2024-Alumina-Graphite Reinforced Monolithic and Hybrid Composites
Abstract: This work investigates the mechanical characteristics of Al2024-Al2O3-Graphite reinforced monolithic and hybrid composites fabricated by the stir casting method. Exploratory work involved the fabrication of monolithic composites with varying Al2O3 contents (5-8 wt%) and hybrid composites with the ratios of Al2O3 (2-6 wt%) and Graphite (1-3 wt%) in matrix Al2024. For improving their dispersion, preheated reinforcement particles were introduced in matrix alloy at controlled stirring rates. A homogeneous particle distribution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 823–836 Read article
-
Comparative Analysis of Different Mechanical Properties of Banana Pseudostem Fiber and Pineapple Leaf Fiber Reinforced Polymer Composite
Abstract: In this research, a hybrid natural fiber polymer composite is prepared using different combinations of banana pseudostem fiber and pineapple leaf fiber in a discontinuous reinforcement phase and epoxy polymer in a continuous matrix phase. For the preparation of the composite, the hand layup technique is used and important mechanical characteristics, namely tensile, flexural, and impact strength, are determined. The findings of this investigation represent that the highest values of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1248–1256 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Thermal and Mechanical Properties of Zn-Fap Composites
Abstract: The aerospace and automotive industries have experienced a substantial surge in interest in innovative composite systems driven by the ongoing demand for lightweight, high-performance materials. In this study, the mechanical properties of zinc (Zn) matrix composites reinforced with fluorapatite particles (Fap) are examined as a function of thermal treatment. Within the context of this investigation, we endeavoured to create composite materials containing Zinc-Fluorapatite powder. Stir casting was used to produce …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1101–1110 Read article
-
AI-Enabled Optimization of Additively Manufactured Composite Materials for Enhanced Mechanical and Thermal Performance
Abstract: This paper discusses the optimization of multi-objective optimization of enhanced coupling of heat and mechanical properties of 3D printed polymer composite materials by artificial intelligence (AI), as a component of a multi-objective optimization framework. It aims at development of nonlinear printing parameters and material properties relationships to achieve maximum tensile strength and thermal conductivity in polymer composites produced through fused deposition modeling (FDM). Short carbon fiber reinforcement was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 867–891 Read article
-
Effect of Thermal Conditions on Microstructure and Mechanical Properties of AA5083 Processed by Equal Channel Angular Pressing
Abstract: A commercial AA5083 with an initial grain size of 210 μm was given an ultrafine-grained structure using the equal channel angular pressing (ECAP) technique under die design as patented. The identical sample underwent two successful passes through the die at 473 K, with each passage causing the sample to rotate 90° along its own longitudinal axis. After just one pressing, the microstructure was comparatively homogeneous. It was made up of …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 49–64 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures are able to deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical …
Published in Emerging Trends in Chemical Engineering Read article
-
Review in Friction Stud Welding of Aluminium to Steel
Abstract: The demand for friction stud welded aluminum/steel joints has increased in many significant applications including cryogenics, structural engineering, spacecraft, rocket fuel tanks and high vacuum chambers owing to their superior properties. In automobile engineering, there is a requirement to join a mild steel earthing pin which is in the shape of a stud to an aluminum car body. Aluminum and steel was considered to join using friction stud welding. This …
Published in Journal of Thermal Engineering and Applications Read article
-
Investigation of Mechanical Properties of Jute and Bamboo Natural Fiber Composites
Abstract: Natural fibers have become increasingly popular in recent decades. Natural fiber composites are also becoming increasingly popular in a various industries, including automobiles, furniture, packaging, construction and sports. Natural fibers have several advantages over synthetic fibers, including low cost, low density, reduced damage to processing equipment, good relative mechanical properties, renewability, and biodegradability. Natural fibers were also introduced with the goal of producing lighter composites, and they have shown a …
Published in Journal of Production Research & Management Read article
-
Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It
Abstract: Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging industries. The objective of the present work was to study the various parameters influencing the drawability of AA6082. The deep-drawing process was modeled and simulated in Ls-Dyna Pre-Post(R) V4.6.17 software. The tensile test was performed according to the ASTM-E8M standard on AA6082-T6 material and subsequently annealed to attain higher ductility. …
Published in Journal of Polymer & Composites Read article
-
Evaluation of microstructure properties and characterization of fracture locus of AA5083 through equal channel angular pressing techniques
Abstract: In this investigation, a commercially available aluminium alloy called AA5083 was subjected to two passes of equal channel angular pressing utilising a route B_C at room temperature for this experiment. To evaluate the effect of AA5083, the microstructure, mechanical attributes, and wear parameters of the alloy were examined both prior to and subsequent to undergoing this technique. Using an optical microscope, microstructural investigations were performed on the pressed alloy's flow …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 270–286 Read article
-
Fabrication and Evaluation of Aluminum Hybrid Metal Matrix Composite via Powder Metallurgy Approach
Abstract: The growing demand for lightweight materials in modern automotive industries has spurred the development of Aluminum-based metal matrix composites (AMMC). Utilizing the powder metal-lurgy method for fabrication offers a cost-effective alternative to other methods. Composites of Al6061 with varying compositions of 6–18 wt% SiC (8 microns) and 6–18 wt% B4C (10 mi-crons) were prepared to assess their physical and mechanical properties. Scanning Electron Mi-croscope analysis revealed uniform dispersion of SiC …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 205–211 Read article
-
Effect of Nano Metal Oxide Loading Rates on Polymer-Nano Metal Oxide Nanocomposites
Abstract: Many industries, such as those in the fields of medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis, utilise nanoparticles and nanocomposites in a variety of applications. A unique class of materials, polymeric nanocomposites outperform their microparticle counterparts by fusing organic polymers with inorganic nanoparticles. Consequently, they ought to advance the field of engineering applications. The presence of inorganic nanoparticles can significantly alter the properties …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 1, 2024 · pp. 1–12 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Investigation on Mechanical Properties of Geo Polymer Concrete With Fly Ash and Steel Fibers
Abstract: The goal of this project was to manufacture fly ash-based geopolymer concrete (FAC), a more environmentally friendly substitute for conventional Portland cement concrete (OPC) by using fly ash (FA) in place of cement. The study discovered that the properties of FAC were comparable to those of OPC, and that the concrete's performance was greatly impacted by the geopolymer's polymeric nature. The geopolymerization process was started with an alkaline solution, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 250–260 Read article
-
Effect of Thermal Conditioning - Mechanical Performance of Natural-Synthetic Fiber Hybrid Composites
Abstract: This study investigates the effects of thermal conditioning on the mechanical and thermal properties of banana-glass fibre hybrid composites, focusing on their tensile, flexural, impact strength, and thermal conductivity. Hybrid composites were fabricated with varying banana-to-glass fibre ratios of 70:30, 50:50, and 30:70 using a hand layup technique, followed by thermal conditioning at 60°C, 80°C, and 100°C for a specified duration. Results highlight that the 50:50 composite treated at 80°C …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 1–11 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article