Search
173 articles for “concrete strength”
-
Advancing Pavement Durability and Sustainability through Glass Fiber Reinforced Concrete Technology
Abstract: This research evaluates the application of Glass Fiber Reinforced Concrete (GFRC) for improving road pavement durability and sustainability. The primary objective was to ascertain the optimal glass fiber content that enhances pavement performance while maintaining economic feasibility. To achieve this, experimental investigations compared the mechanical properties of GFRC to traditional Portland Cement Concrete (PCC). The experiments focused on key performance metrics such as tensile, compressive, and flexural strengths, with GFRC …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 760–774 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Investigation on Structural Behavior of RC Beam-Column Joints: State-of-the-art
Abstract: Beam-column joints (BCJs) are critical structural elements in buildings, influencing overall structural performance and safety. This review paper presents a comprehensive analysis of findings of research showing concern about various aspects of BCJs, focusing on eccentricity effect, numerical investigation, joint behavior, shear strength, retrofitting strategies, and recent advances. Through experimental studies, numerical simulations, and analytical approaches, various studies have made significant progress in understanding BCJ response to various loading circumstances …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 40–68 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Limestone Calcined Clay Cement (LC3) as a Sustainable Cementitious Composite for Retrofitting Concrete Structures: A Systematic Review
Abstract: This systematic review evaluates the effectiveness of Limestone Calcined Clay Cement (LC3) as a sustainable material for repairing and retrofitting damaged concrete structures. LC3 is highlighted as a low-carbon alternative to Ordinary Portland Cement (OPC), offering improved strength, bonding, and long-term durability. The review compiles and analyzes data from peer-reviewed experimental studies focusing on LC3’s mechanical performance, interface bonding, and durability parameters. Results consistently show higher bond strength, reduced shrinkage, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 163–174 Read article
-
Parametric Study of Fiber-Reinforced Concrete with Partial Cement Substitution Using Fly Ash and Rice Husk Ash
Abstract: This research aims to evaluate the impact of incorporating steel fibers [SF] and partially substituting cement with rice husk ash [RHA] and fly ash [FA] on the properties of concrete. SF were added in different volume fractions [0%, 0.25%, 0.5%, 0.75%, and 1.0%], combined with 10% RHA and 20% FA. Initially, the concrete mix contained 30% FA with no RHA, which was then adjusted to a mix of 15% FA …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 171–180 Read article
-
Design of a Geopolymer Based on Fly Ash and Metakaolin with a Solid, Liquid, and Powdered Alkaline Activator at High Temperatures
Abstract: In this work, the fresh and hardened properties of geopolymer concrete activated using solid, liquid, and powder alkaline activator systems, including fly ash and different amounts of metakaolin, are examined. Compressive and flexural strengths were assessed at 7 and 28 days in accordance with IS 516 (1959). Workability was evaluated using a slump test in accordance with IS 1199 (Part 2): 2018. At an ideal replacement level of 30%, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 712–726 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Utilization Waste Products as Reinforcement in Development of Composite Material: A Review
Abstract: In the modern world, businesses are responsible for producing a diverse range of waste products. Rice husks and eggshells are two examples of wastes that fall into this category. Both of these types of garbage are responsible for contributing to pollution in a variety of distinct ways. Eggshell, which is a common consequence of industrial operations, is one of the most significant contributors to the contamination of soil. This is …
Published in Journal of Polymer & Composites Read article
-
Retrofitting of RC Beams Using FRP and FRCM
Abstract: The deterioration of reinforced concrete (RC) structures due to various factors such as aging, aggressive environments, or increased loads poses significant challenges to structural integrity and safety. Retrofitting techniques have emerged as effective solutions to enhance the structural performance of existing RC members. Among the retrofitting options, the use of Fibre Reinforced Polymer (FRP) and Fibre Reinforced Cementitious Matrix (FRCM) systems have gained considerable attention in recent years. The study …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 31–40 Read article
-
Investigation of Sulphate, Alkali and Carbonation Chemical attack in GGBS-Based Geopolymer Concrete and OPC Concrete
Abstract: This study presents a comparative evaluation of the durability of GGBFS-based Geopolymer Concrete (GPC) and OPC concrete in rapid carbonation, sulphate, and alkali environments. All samples were subjected to three severe conditions are carbonation at 4% CO₂, 25°C and 60% relative humidity, exposure to a 10% sodium sulphate (Na₂SO₄) solution, and immersion in a 10% sodium hydroxide (NaOH) solution for alkali resistance. The durability characteristics were evaluated by the compressive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 13–35 Read article
-
Investigating Flexural Behavior in Cyclic Loading of Fly Ash-Based Green Concrete
Abstract: The construction industry is increasingly embracing sustainable materials, and geopolymer concrete (GPC) has emerged as a promising eco-friendly alternative to Ordinary Portland Cement (OPC). Derived from industrial by-products such as fly ash, GPC offers significant environmental advantages by reducing greenhouse gas emissions associated with conventional cement production. This study explores the monotonic and cyclic performance of fly ash-based GPC, with a focus on its mechanical and structural behavior. Key properties, …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 1, 2025 · pp. 1–5 Read article
-
Recent Advances in Polymer Analysis and Characterization Techniques for High-Performance Materials
Abstract: Polymers play a vital role in various fields, from biomedical engineering to energy storage. Developing high-performance polymers requires a deep understanding of their structure, properties, and behavior. This review paper delves into recent advancements in polymer analysis and characterization techniques. This paper is a comprehensive bibliometric analysis which investigates the research landscape of geopolymer concrete incorporating construction and demolition waste (CDW) by analyzing 389 publications from the Web of Science …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 76–93 Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
Numerical Investigation on Structural Behavior of RC Beam-Column Joints: Beam Weak in Shear
Abstract: This study presents a numerical investigation on structural performance of reinforced concrete (RC) beam-column joints (BCJ) with beam weak in shear subjected to cyclic loading. Retrofitting techniques are explored, utilizing Glass Fiber Reinforced Polymer (GFRP) for shear strengthening, in accordance with ductile detailing standards outlined in IS 13920:2016. The column and beam elements are designed following the guidelines of IS 456:2000. Various specimen scales, including full-scale, 2/3-scale, and 1/3-scale specimens, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 202–226 Read article
-
Assessing the Influence of Aggregates and Cement Type on the Properties of Roller-compacted Concrete
Abstract: Roller-compacted concrete (RCC) pavement is suitable for heavy traffic and harsh environment. In the present investigation, RCC slab samples have been prepared using two types of aggregates (crushed and rounded), and two types of cement binder (ordinary Portland and sulphate resistant). Cubes and beam specimens have been extracted from the slab samples with the aid of diamond saw. Specimens were tested for bulk density, ultrasound pulse velocity, compressive and flexural …
Published in Trends in Transport Engineering and Applications Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article