Search
164 articles for “solar photovoltaic system”
-
Advancements in Thermal Performance of Solar Flat Plate Collectors: A Comprehensive Review
Abstract: Over the past couple of years, solar flat plate collectors (FPSCs) have undergone significant improvement regarding their thermal performance. The review evaluates the improvement of materials such as advanced coatings; metals with a high thermal conductivity; and nanostructured additives. New cover technologies, such as polymeric films and anti-reflection coatings, are discussed, as well as novel insulation technologies such as aerogels and vacuum panels. Also of interest are phase-change materials and …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 10–14 Read article
-
Analysis of Hybrid Photovoltaic Thermal (PV/T) Integrated Solar Dryer: An Experimental Validation
Abstract: In this study, a hybrid photovoltaic thermal (PV/T) integrated solar dryer has been designed, developed, and experimentally analyzed to evaluate its performance in real-world climatic conditions. The system incorporates a UV-stabilized sheet mixed-mode tent house structure, installed on the rooftop of a building located in Bhilai, Chhattisgarh, India. The dryer is equipped with a thermal collector directly connected to the drying chamber to enhance heat transfer efficiency. Experiments were conducted …
Published in Journal of Thermal Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 1–6 Read article
-
Exploring the Role of Thin Film Coatings in Solar Energy Harvesting
Abstract: With notable gains in efficiency, longevity, and affordability, thin film coatings have become a key technology in the field of solar energy harvesting. These coatings, typically composed of materials like titanium dioxide (TiO₂), cadmium telluride (CdTe), and amorphous silicon (a-Si), are applied to photovoltaic (PV) cells to enhance their ability to absorb and convert sunlight into electricity. This review article delves into the various types of thin film coatings used …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 2, 2024 · pp. 15–19 Read article
-
Hybridization of Photovoltaic Panels and Thermoelectric Generators: Energy Efficiency Improvement
Abstract: Heat removal from PV panels has been revealed as a feasible and operational solution to reduce the temperature of the panel and increase energy efficiency. In this paper, the use of a thermoelectric generator (TEG) attached to the photovoltaic panel is proposed. A set of Peltier cells has been designed, built, and coupled to the rear side of a PV panel to remove the heat flow generated at the PV …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 3, 2022 · pp. 29–46 Read article
-
MATLAB/Simulink Based Modelling of Solar Photovoltaic Cell
Abstract: AbstractThis paper focuses on a Matlab/SIMULINK model of a 36 cell/72 cell solar photovoltaic cell. This comprehensive Solar Photovoltaic model has been built on mathematical equations and improved through an analogical circuit connecting a photocurrent source and a diode, connecting through a series resistor and a shunt resistor. The developed model assists in the predicting and analyzing the behaviour and properties of PV cell/PV module under different physical and environmental …
Published in Journal of Microcontroller Engineering and Applications · Vol. 5, Issue 3, 2018 · pp. 21–28 Read article
-
Comparative Study of Boost, Elementary LUO and Super Lift LUO Converters for MPPT Photovoltaic Using P and O and Inc Methods
Abstract: The current Power demand of both industrial and domestic sectors forcing them to shift from traditional power sources to the green sources like Solar and Wind. Distributed Generation systems using solar and wind have multi-fold benefits compared to the traditional power generation. The Electrical power drawn from these renewables sources using MPPT methods such as Perturb & Observe (P&O), and Incremental Conductance (INC) methods are examined in this paper for …
Published in Journal of Power Electronics and Power Systems · Vol. 12, Issue 3, 2022 · pp. 26–43 Read article
-
To Evaluate the Performance of the Selected Hybrid Systems and Validation of Mathematical Model with the Experimental Data
Abstract: The main aim of this paper to evaluate the performance of the PV-Wind hybrid systems and validation of mathematical model with the experimental model. In the research paper, the experimental model of PV-Wind Hybrid system has been installed at a height of 22 meters in the School of Energy and Environmental studies, DAVV, Indore, and M.P., India. The theoretical calculation of the wind generator output has also been compared with …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 2, 2025 · pp. 20–28 Read article
-
High Gain High Efficiency Single Switch DC–DC Converter for Green Power Source Conversion
Abstract: Efficiency of solar cell is very low and it is preferred to be operated at low voltages; so it is difficult to supply power to a certain load. Conventional boost converter offers limited gain. So a high voltage boosting is needed. Proposed converter consists of coupled inductor and switched capacitor technique to achieve high gain without high duty ratio and turns ratio. In the magnetic field of coupled inductor and …
Published in Journal of Power Electronics and Power Systems · Vol. 8, Issue 3, 2018 · pp. 46–56 Read article
-
Enhancing Energy Storage and Optimization of Distributed Energy Resources Using a Hybrid SWOA-MSNN Approach
Abstract: The fast growth of Distributed Energy Resources (DERs) like solar photovoltaics, wind power, and energy storage devices requires enhanced optimization methods to manage energy efficiently and stabilize operations in contemporary smart grids. A significant challenge is the dynamic optimization of the energy storage systems (ESS) and the distribution of the energy among DERs in conditions of uncertainty of loads and generation. The conventional control and optimization methods generally find it …
Published in International Journal of Advanced Control and System Engineering · Vol. 4, Issue 2, 2026 Read article
-
Design, Development and Performance of Inverted Absorber Type Solar Dryer System for Red Chilli
Abstract: AbstractDrying process has an important role in the preservation of agriculture products. It is defined as a process of moisture removal due to heat and mass transfer. A solar dryer has been designed under the climatic condition of Indore region (Latitude 22.44N and Longitude 75.5 E) of Madhya Pradesh, India. A solar dryer consists of inverted absorber dryer with glass cover and one blower operated by photovoltaic module. The experimental …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 9, Issue 3, 2019 · pp. 13–16 Read article
-
Bismuth-Doped CuGaS₂ Thin Films for Enhanced Photovoltaic and Electrocatalytic Performance
Abstract: This study presents the development and application of bismuth (Bi)-doped CuGaS₂ thin films for enhanced performance in photovoltaic and electrocatalytic systems. Using a cost-effective all-solution processing method, Bi-doped CuGaS₂ chalcopyrite nanocrystals were synthesized and spray-deposited onto molybdenum substrates. The resulting films, with a thickness of approximately 730 nm and grain sizes larger than 400 nm, exhibited superior optical properties and a lower band gap compared to undoped films, making them …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 01–07 Read article
-
Self-Healing Graphene–Polymer Nanocomposite Encapsulation Layers for Ultra-Stable Perovskite Photovoltaic Modules under Extreme Environmental Conditions
Abstract: The recent trend is that perovskite photovoltaic modules are vulnerable to moisture, oxygen, thermal cycle, UV, and mechanical stress, which seriously affect the working stability of the modules under harsh environmental conditions, thereby hindering the rapid commercialization. In this study, a new self-healing graphene–polymer nanocomposite encapsulant layer is proposed to improve the durability and reliability of perovskite solar modules in extreme climates. The encapsulation system combines functionalized graphene nanosheets into …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Intelligent Power Quality Enhancement Strategies for PV-Integrated Smart Distribution Networks: A State-of-the-Art Review
Abstract: The rapid integration of photovoltaic (PV) systems into modern power distribution networks has introduced significant challenges related to power quality. Issues such as voltage fluctuations, harmonic distortion, flicker, and reactive power imbalance arise due to the intermittent and nonlinear nature of solar energy generation. This paper presents a concise literature review of various power quality enhancement techniques employed in PV-integrated networks. Key approaches include the use of active power filters …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 1, 2026 · pp. 30–53 Read article
-
Enhancing Power Quality and Harmonics Control via Integration of PV, Wind, and Battery Systems with Three-level Inverter in DC Micro grid Management
Abstract: The primary goal of this research is to develop a multi-level inverter-based energy management approach for a smart DC-micro grid. An electric micro grid is created in this project by combining photovoltaic (PV), wind, and batteries. Solar and wind power can be efficiently extracted, and the quality of power can be improved by using FOPID control for source-side converters (SSC) and load-side converters controlled by multilevel inverters. To make the …
Published in Journal of Power Electronics and Power Systems · Vol. 14, Issue 1, 2024 · pp. 18–27 Read article
-
Design and Simulation of a Transformer Coupled Push-Pull Inverter and Matrix Converter Types Smart Solar Grid System
Abstract: This research paper deals with the design and simulation of facile and robust AC voltage originator using a solar power. PV technology is used for generating DC voltage as solar power is very reliable source. Push-pull inverter is used to convert the DC to AC as well as enhanced the magnitude of single phase signal. Matrix converter is also used to convert the single phase AC to three-phase AC signal. …
Published in Trends in Electrical Engineering · Vol. 9, Issue 1, 2019 · pp. 1–16 Read article
-
Semiconducting Materials for Emerging Electronics and Technological Applications
Abstract: Semiconducting materials are important for emerging electronic and photovoltaic technologies because their structural, optical and electrical properties can be tailored for specific device applications. In this study, a TiO₂-based composite photoanode is considered as a polymer-assisted semiconducting thin-film system in which inorganic TiO₂ nanoparticles are processed with organic film-forming components to produce a porous layer for dye-sensitised solar cell application. Nanocrystalline TiO₂ nanoparticles were synthesised from titanium isopropoxide using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 36–50 Read article
-
Sustainable Electricity Generation through Solar Power Technologies: A Review
Abstract: Fossil fuels are burned to create the bulk of the energy produced globally, which depletes fossil fuel reserves and releases carbon dioxide into the atmosphere. The continued volatility of fuel prices has sparked serious concerns about the sustainable use of fuel for future energy needs. Energy use can be made sustainable and clean by minimizing the use of renewable energy resources as opposed to the damaging gases generated during the …
Published in Journal of Power Electronics and Power Systems · Vol. 14, Issue 1, 2024 · pp. 28–36 Read article
-
Energy Management of a Solar Powered Electric Vehicle with Multiple-Energy Storage via Optimized Fuzzy Controller
Abstract: The optimum energy management is the main challenge of powered electric vehicles (EVs) with multiple energy storage systems. The solar powered EVs are enabled with multiple energy sources and storages, and so, achieving the optimum energy management schedule is a complicated optimization problem. This paper develops an optimized fuzzy controller using genetic algorithm (GA) for energy management of solar powered EV equipped with photovoltaic cells as well as two power …
Published in Journal of Control & Instrumentation · Vol. 7, Issue 3, 2016 · pp. 28–38 Read article
-
Heat Sink-PCM Device for PV Efficiency Improvement
Abstract: This paper is focused on the development of a second stage of a previous work where the PV panel efficiency is improved by using a hybrid system made up of a PCM attached to the rear side of the panel. This evolved stage incorporates a heat sink unit to improve the distribution of the heat removed from the panel; this improvement reduces the elapsed time to reach the steady state …
Published in Journal of Thermal Engineering and Applications Read article
-
Review on Design and Plan for Installation of Solar PV Modules on University Building
Abstract: AbstractThe power generation sector is capable of generating around 152 Giga Watt but still 17 per cent villages of India generally termed as deserted or mobile areas are still non - electrified in figures it is around 450 million people who lived without electricity till the year 2008. The power sector uses the coal as a primary source of fuel. A report on behalf of ministry of coal said that …
Published in Recent Trends in Fluid Mechanics · Vol. 6, Issue 3, 2019 · pp. 12–16 Read article