Search
215 articles for “flexure”
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Enhancement of Mechanical Properties in Hemp Fiber-Reinforced Epoxy Composites Using Graphene Nanoplatelets
Abstract: This study investigates how incorporating graphene nanoplatelets (GNPs) influences the mechanical performance of hemp fiber–reinforced epoxy composites. Hemp fibers were chemically treated by alkali treatment to improve fiber–matrix adhesion owing to their high specific strength, stiffness, renewability, and environmental friendliness. Graphene nanoplatelets were dispersed in acetone by probe sonication and added to acetone epoxy matrix at a concentration of 0.5 wt% and 1.0 wt%, respectively. Composite laminates were prepared by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 98–109 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Mechanical and Sustainable Enhancement of Epoxy Composites using Tamarind Seed Powder
Abstract: The investigation examines how tamarind seed powder affects epoxy-based materials for the development of waste-based useful products. The research examines the mechanical behavior of epoxy resin composites which contain tamarind seed powder in increasing percentages spanning from 10% to 40%. The team utilized the hand layup method to produce the composites which then fulfilled the ASTM guidelines for specimen fabrication for mechanical tests. The study examined fundamental mechanical parameters by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 797–806 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Fabrication and Characterization of PLA-CSP Composites via FDM for Biodegradable Food Packaging
Abstract: In light of the growing need for environmentally friendly alternatives to conventional plastic packaging, this study presents the design of a food-grade, biocompatible packaging material composed of Polylactic Acid (PLA) and packed with coconut shell powder (CSP). One of the most well-known thermoplastic polymers, PLA is produced from renewable resources like sugarcane or maize starch. Its nontoxicity, biodegradability, and adherence to food safety standards and regulations provide energy. Unfortunately, PLA's …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1016–1025 Read article
-
Sustainable Development of Carbon–Sisal Reinforced Polyester Composites through Green Nanotechnology
Abstract: This study presents the sustainable development of carbon–sisal fiber reinforced polyester composites enhanced through green nanotechnology for improved mechanical performance and environmental compatibility. The hybrid composites were fabricated using varying fiber ratios - C1 (70% carbon, 30% sisal), C2 (60% carbon, 40% sisal), and C3 (50% carbon, 50% sisal) - with an optimized addition of 1 wt.% nano-silica (SiO2) synthesized via a green sol–gel route. The tensile, flexural, and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1179–1194 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Investigation on mechanical performance of 3D printed PLA-Kraft Lignin composites
Abstract: Bio-based polymer composites are becoming more popular due to the growing need for sustainable and biodegradable materials in additive manufacturing. PLA-kraft lignin composites were created and their mechanical performance in fused deposition modeling (FDM) applications was assessed in this work. Polylactic acid (PLA) was mixed with Kraft lignin, a sustainable by-product of the paper industry, at weight percentages of 0%, 1%, 3%, 5%, and 7%. Melt blending was utilized to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1002–1015 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article