Search
1991 articles for “Temper” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Effect of Mould Cavity Thickness on Cooling Rate of Aluminium with Temperature Dependent Properties
Abstract: Solidification study of aluminium with temperature dependent thermal properties has been conducted. Effect of the mould cavity wall thickness on the cooling rate has been the target in the present work. Casting is earliest metal shaping process and has been used in many industries and households. Solidification during casting is the most crucial event which has been studied by the many researchers because it affects the quality of the casting …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 31–35 Read article
-
Structural and Optical Properties of Porous Anodic Alumina Annealed at Different Temperatures
Abstract: We report the structural and optical properties of porous anodic alumina (PAA) membranes synthesized using anodization technique, which were subsequently annealed at various temperatures up to 1000°C. The influence of annealing temperature on the structural aspects and photoluminescence (PL) properties of PAA was investigated. XRD analysis of the PAA confirmed the amorphous nature of the synthesized PAA membranes. The structural transition of the annealed templates from amorphous to ɣ-Al2O3 was …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 18, Issue 2, 2016 · pp. 15–20 Read article
-
Estimation of Land Surface Temperature using Landsat Data: a Case Study of Agra City, India
Abstract: Land surface temperature (LST) is an important indicator for the study of climate change, urban environment, heat balance studies, hydrological and agricultural process, and urban land use and land cover as well as user input for climate models. Landsat data is utilized for the number of applications such as environment study, digester and resource management. Land surface temperate is estimated by the help of ArcGIS through Landsat 8 and 5 …
Published in Journal of Remote Sensing & GIS · Vol. 10, Issue 3, 2019 · pp. 48–57 Read article
-
Analysis of a Medium Temperature Organic Rankine Cycle for Various Mixtures of Organic Fluids
Abstract: AbstractA blend of 70% alkane and 30% carbon dioxide (molar composition) possess low global warming potential, zero ozone depletion potential and are non-flammable. These mixtures are reported to be the potential working fluids for power generation in a transcritical condensing cycle. In this paper, detailed thermodynamic analysis is performed for the medium temperature organic Rankine cycle (ORC) with the mixtures of CO2 with propane or isobutene or isopentane. Among all …
Published in Research & Reviews : Journal of Ecology · Vol. 5, Issue 2, 2016 · pp. 1–9 Read article
-
Determination of Possible Point of Wax Depositionalong Flowlines in the Niger Delta
Abstract: The focus of this study is to determine the possible point of wax deposition along an oil flowline in Niger delta. This research commenced with field studies to ascertain the flowline profile. The temperature profile along the flowline was determined using infra-red thermometer. Crude oil sample was taken from wellhead and laboratory analysis was carried out on the crude sample to determine the wax appearance temperature (WAT) of crude and …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 1–8 Read article
-
Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature
Abstract: This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the substances that, undergo through a phase transition, such as melting from solid to liquid by absorbing or releasing a significant amount of energy as heat. PCM is advantageous for the thermal control of batteries because of this characteristic. As the battery produces heat, the PCM surrounding it absorbs the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 19–31 Read article
-
Comparison of High and Low Temperature Properties of Dual Modified Asphalt Binders with Polyphosphoric Acid and Polymer Modified Bitumen using Rheological Tests
Abstract: The main objective of this study was to investigate the properties of asphalt binder mixtures at both high and low temperatures. To achieve this, two types of admixtures were selected and combined, resulting in a technology known as dual modified asphalt binders. Extreme temperatures during summer and winter can lead to significant issues such as cracking and rutting in asphalt binder pavement. In order to address these problems, a comprehensive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 23–34 Read article
-
Effect of Bi2O3 Content and Sintering Temperature on the Frequency-Dependent Magnetic Properties of Nanosized Barium Hexaferrite
Abstract: The magnetic properties of commercially available nanosized barium hexaferrite (BaFe12O19) are studied. The particles were characterized using X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and high-frequency magnetic measurements. The frequency-dependent magnetic properties viz. complex permeability and loss tangent were analyzed within the 10 MHz to 1 GHz range. Variations in complex magnetic permeability and loss tangent were discussed under varying sintering parameters such as temperature and sintering aid content. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 107–113 Read article
-
Controlling and Management of the MEMS IMU's temperature with a Peltier Plate
Abstract: Due to its small size, light weight, low consumption of electricity, and low cost, micro-electro-mechanical systems, or MEMS, IMUs (Inertial Measurement Units) have been increasingly popular in robotics, UAVs, and UGVs (Unmanned Ground Vehicles) in recent years. MEMS IMUs combine a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, thermometer, and other components into a single microchip; nevertheless, the accuracy of MEMS gyroscopes is sometimes poor, particularly when temperature is considered, and …
Published in Journal of Thermal Engineering and Applications · Vol. 10, Issue 3, 2023 · pp. 36–45 Read article
-
Innermost Surface Temperature Characteristics of Solar Photovoltaic Double Pane Window
Abstract: A window has a great role in the thermal comfort and HVAC load of a building. The role of a window in the HVAC load further increases in a location where both the summer and winter conditions are severe. In the above context, the innermost surface of a double pane window system is the most important. The present paper presents an analysis of the temperature characteristics of the innermost surface …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 12, Issue 3, 2021 · pp. 30–40 Read article
-
Gas and Temperature Detection System using Microcontroller
Abstract: In current system safety plays an important role, so best safety systems to be implemented in everyday routines. Gas leakage is a major concern with residential, commercial premises, and gas powered transportation vehicles. One of the preventive measures to avoid the danger associated with gas leakage is to install a gas leakage detector at vulnerable locations. The objective of this work is to present the design of a cost effective …
Published in Journal of Control & Instrumentation · Vol. 4, Issue 2, 2013 · pp. 1–7 Read article
-
Temperature Control System using Artificial Intelligence
Abstract: Artificial Intelligence (AI) based controller for temperature control of a water bath system. The generation of membership function is a changeling problem for fuzzy systems and the response of fuzzy systems depends mainly on the membership functions. Artificial Neural Network based input and output used to tune the membership functions in fuzzy system. Two input and single output artificial intelligence is designed to control the temperature system .Further the tuning …
Published in Journal of Control & Instrumentation · Vol. 3, Issue 1-3, 2012 · pp. 76–83 Read article
-
Using digital holographic interferometry to monitor symmetrical temperature fields in liquids and an interference technique for simultaneous heat and mass transfer
Abstract: In this work, we offer a technique for off-axis digital holographic interferometry to measure dynamic temperature change quantitatively in real-time and visualise volumetric temperature fields formed by a 2D axial-symmetric heated fluid from a pulsatile jet in a water tank. For the experimental examination, a portable Mach-Zehnder interferometer was constructed. The pulsatile jet was supplied with hotter water and submerged in a tank of water. Results that have been averaged, …
Published in Journal of Experimental & Applied Mechanics · Vol. 13, Issue 2, 2022 · pp. 22–26 Read article
-
Design of a Real-Time Temperature Monitoring System using PIC to PIC SPI Communication with Multiple Displays and Wireless GUI Control
Abstract: AbstractThis paper proposes a real-time temperature monitoring system using PIC to PIC communication with SPI protocol that can read, process and display the sensed data. The system has three modules, a Sensor (Slave) module, a Master module and a computer-based GUI module. The GUI provides control operations and communicates with the Master module over Bluetooth to send control commands and receive data. The Master module takes control commands from the …
Published in Journal of Microcontroller Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 6–24 Read article
-
Frequency Characteristics and Transient Response of Transmission Lines with Longitudinally Varying Ambient Temperature
Abstract: This paper addresses the steady state, the frequency characteristics and the transient response ofpower lines in the presence of longitudinally varying ambient temperature. This variation willlead to location-dependent line circuit parameters and to a changing equivalent circuit. Thederived models, which are based on the exact long line theory, can incorporate the impact of thedifferent patterns of the temperature distribution in terms of location and magnitude. Severalcase studies of the resulting …
Published in Journal of Power Electronics and Power Systems · Vol. 9, Issue 3, 2019 · pp. 19–30 Read article
-
Effect of Temperature on Inhibitory Efficacy of Tamarindus indica fruit extract on acid corrosion of Aluminium
Abstract: An attempt has been made to investigate the anti-corrosive propensity of ethanolic extract of Tamarindus indica fruit at elevated temperature between 303 to 343 K, so as to replace the exploitation of toxic chemicals as corrosion inhibitors. Inhibition efficiency has been observed significantly high (84.06%) at room temperature at concentration 0.45 %. The inhibition efficiency is found to increase with increasing concentration of extract and decrease with rise in temperature. …
Published in Recent Trends in Fluid Mechanics · Vol. 10, Issue 3, 2023 · pp. 42–50 Read article
-
Evaluation of Real Time Data Acquisition of Temperature for Resistance Spot Welding
Abstract: Resistance spot welding is a popular metal joining process which is widely used in automobile industry, household and domestic appliances manufacturing industry and fabrication industry like air craft manufacturing industries [1]. Experimental investigation has been carried out on inner and outer sleeve which is used in stove manufacturing industry. Material taken is stainless steel SS304 for experiment having thickness 0.5 mm. Experimental investigation of real time temperature measurement and thermal …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 6–10 Read article
-
Modeling and Simulation Study of Flow and Temperature Characteristics of a Pen-shaped Plasma Torch
Abstract: This study presents the numerical modeling, simulation and experimental findings of plasma flow and temperature characteristics in pen-shaped plasma torch. The complex plasma flow characteristic due to the interaction between electric arc and nitrogen gas inside the pen-shaped plasma torch is modeled using the Maxwell’s and the Magnetic-Hydrodynamic (MHD) equations. Cartesian coordinate based finite volume discretization is used to solve numerically all the governing equations. At a specific boundary condition, …
Published in Trends in Mechanical Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 22–30 Read article
-
Designing and Analysis of a Negative Bias Temperature Instability Sensing Circuit
Abstract: Scale down the size of devices introduce the effect of negative bias temperature instability (NBTI), positive bias temperature instability (PBTI), and hot carrier injection (HCI) in very-large-scale integration (VLSI) chip design and the major concern is to minimize these effects to a nominal value. In the paper, authors focus in minimization of NBTI effect and develop a noble degradation monitoring sensor circuit named SCHIMOS. A comparison is stated between an …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 8, Issue 1, 2020 · pp. 6–11 Read article
-
A Study to Assess the Effectiveness of Planned Teaching Programme on Knowledge Regarding Temper Tantrums among Mothers of Toddlers in Selected Areas of Sangli, Miraj and Kupwad Corporation Area
Abstract: As a child discovers her autonomy, most mothers must manage and cope with tantrums, the intensity and frequency of which can potentially create a lasting and negative behavioral dynamic. For these reasons, tantrums are important childhood phenomenon that appears to warrant more empirical attention than they have been given to date. Thus, the investigators felt the need to conduct a study to assess the effectiveness of planned teaching programme on …
Published in Journal of Nursing Science & Practice · Vol. 7, Issue 1, 2017 · pp. 1–3 Read article