Search
756 articles for “Matrix”
-
Physical and Mechanical Characterization of Boron carbide(B4C) and waste granite dust reinforced hybrid aluminium composite.
Abstract: In this particular study the concussion of B4C and waste granite dust reinforced on AA6082-T651 hybrid aluminium matrix composite (AMCs)which was fabricated using the stir casting process was investigated.These reinforcements were mixed and varied in the ratio of 1:0,0:1,1:1,1:3,3:1 respectively in the aluminium metal matrix composite .The physical and mechanical characterization of these AMCs were investigated.The obtained results indicate that the density of the composite XCM-5 increased by increasing the …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 17–26 Read article
-
Vibration Mechanics of Hybrid Al 5083/SiCp/Fly Ash Composite Plates for its Use in Dynamic Structures
Abstract: Metal Matrix composites are a unique class of materials, with specific characteristics. The selection of reinforcement phase for reinforcing the metal matrix depends on many parameters and is a major concern, Silicon carbide particulates (SiCp) enhances the hardness of specimens but on the other hand it induces brittleness in the specimen which is of major concern, henceforth fly ash particulates are thought of as an alternative reinforcement for improving the …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 1, 2017 · pp. 11–18 Read article
-
A Contemplating Review on Pure and Modified Polymeric Membranes for O2/N2 Separation
Abstract: The separation of O2/N2 by using membrane technology from air got the interest of the process industries due to its advantage over the conventional technologies like cryogenic distillation and pressure swing adsorption, in terms of simplicity, size, economic and power consumption. Membrane material selection for the separation of O2/N2 is challenging because most of the materials have low selectivityand others have low permeability. To meet both the selectivity of O2/N2 …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 9–32 Read article
-
A Review on The Role of Nanoparticles in Modifying Mg Alloys and Composites
Abstract: Reviewing and assessing magnesium's uses in the automobile sector, which have the potential to greatly improve fuel efficiency and environmental preservation, is the goal of this study. The report provides an overview of magnesium alloys' present benefits, drawbacks, technological obstacles, and future prospects in the automobile sector. The development of magnesium matrix composites has advanced to a new level thanks to the magnesium matrix nanocomposites' exceptional mechanical qualities. Dispersing nanoparticles …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 24–32 Read article
-
Comprehensive Analysis of MRSA Peptides Via Maldi
Abstract: The present study employed Matrix-Assisted Laser Desorption/Ionization Time-of-Flight mass spectrometry to analyze methicillin-resistant Staphylococcus aureus peptides, focusing on various parameters associated with mass-to-charge (m/z) values. Through systematic data collection and analysis, including time, intensity, signal-to-noise ratios, quality factors, resolutions, areas under the peaks, relative intensities, full widths at half maximum, Chi-squared values, and background peaks, comprehensive insights into the spectral characteristics of methicillin-resistant Staphylococcus aureus peptides were obtained. Methicillin-resistant Staphylococcus …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 15, Issue 2, 2024 · pp. 98–101 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
A Review on Hybrid Inorganic–Polymer Analog Nanocomposites Incorporating Pozzolanic Wastes and nano-Additives
Abstract: The recent progress of polymer matrix nanocomposites (PMNCs) reveals that the performance of matrix and filler is at the core of matrix–filler interaction, interfacial bonding, and well-controlled distribution of nanoscale reinforcements. Applying these concepts, we consider inorganic particulate systems as hybrid nanocomposites, in which a discontinuous inorganic matrix is effectively reinforced via synergistic co-incorporation of pozzolanic wastes and nano-additives. In the composite system described above, silica-, alumina-rich pozzolanic materials serve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 131–141 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Design of Phase Coded Sequences for MIMO Radar Systems
Abstract: MIMO radar technology is emerging trend in the radar systems and researchers are interested to explore this technology. Phased array radars show single waveform radiated in one direction where has MIMO antennas can radiate in different directions and locate multiple targets with better resolution. To design waveform for MIMO radar, every transmitted waveform must orthogonal all corresponding waveform. Many binary orthogonal sequences, i.e., orthogonal with respect to frequency or phase …
Published in Current Trends in Signal Processing · Vol. 12, Issue 3, 2022 · pp. 28–35 Read article
-
Finite Element Analysis (FEA) Based Design of a Brake Master Cylinder with Varied Materials
Abstract: This research article deals with the Finite Element Analysis (FEA) based design of the brake master cylinder of different materials. The brake master cylinder is considered as the most significant component in almost all passenger cars equipped with a hydraulic braking system. The brake master cylinder came under the control and safety category components and is popularly considered to be the heart of the braking system. It must be designed …
Published in Journal of Automobile Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 1–16 Read article
-
Characteristics of Hydrated Concrete Mix by Using Steel Slag
Abstract: Steel slag is derived from steel manufacturing industry and is produced in burned steel production furnaces. Those produced steel slags can be consumed as coarse or fine aggregates in the construction of civil engineering structures while preparing the concrete. It is usually used as aggregate in hot mix asphalt surface purposes. However, in numerous numbers of recent researches it has been observed that there is a possibility of consuming this …
Published in Journal of Construction Engineering, Technology & Management · Vol. 12, Issue 1, 2022 · pp. 33–40 Read article
-
Studies on Erosion Wear Behavior of Aluminum-3 Magnesium-10 Silicon Carbide Composite
Abstract: Aluminum-based metal matrix composites (MMCs) offer potential for advanced structural applications when high specific strength and modulus as well as good elevated temperature resistance along with light weight are important. In the present work, aluminum alloy-silicon carbide composite (Al-3Mg-10SiC) is developed using the stir-casting technique and is subjected to study the wear behavior. Solid particle erosion on Al-3Mg-10SiC was conducted. Implementation of design of experiments (through Taguchi and statistical techniques) …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 39–50 Read article
-
Fabrication and characterization of Tensile properties ofaluminium 5083/silicon carbide/fly ash composites for advanced engineering applications
Abstract: The present work includes the fabrication of hybrid Metal Matrix Composite materials by consolidating the attractive traits of Metals, Ceramics and byproducts of combustion in power plants. More often than not, when no less than two reinforcements are introduced into the matrix phase, it is known as a hybrid composite and current research focuses on fabrication and characterization of composite materials. Aluminum Metal Matrix Composites with Silicon carbide reinforcements are …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 6–9 Read article
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
Investigate the Physical and Mechanical Properties of Short Coconut, Short Bamboo Fibers and Short Glass Fiber Reinforced Phenol Formaldehyde Composites
Abstract: In the field of research, the composite materials become the dominant materials from last forty years. Because of eco-friendly nature and sustainability, the researchers are using natural fibers in polymer composites to obtain good thermal, acoustic insulating properties, excellent formability and weight-resistance compared to traditional building materials. In the present research work, seven different fiber reinforcement Phenol formaldehyde matrix polymer composite i.e., short coconut, short bamboo and short glass fiber …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 53–61 Read article
-
Evaluation of the Properties of Sugarcane Bagasse Composites
Abstract: Many of the researches are ongoing towards these natural fibre composites in order to replace few materials like plastic and ceramics. In this work we have focused on the preparation of a polymer matrix composite using sugarcane bagasse fibre which intern helpful to study regarding its mechanical behavior. Over the past thirty years of composite materials history says that it has been the dominant emerging materials which have proved with …
Published in Journal of Production Research & Management · Vol. 10, Issue 2, 2020 · pp. 20–23 Read article
-
New Data Transmission Model based on Probabilistic Coding
Abstract: This paper proposes a new model for data transmission possesses high level security and efficiency. The probabilistic coding is applied to design this model. The uniqueness comprises with the matrix, the operation lies with probability and the complexity comprises with the coding. Thus, the resultant is the proposed model. The transmission of data requires speed, accuracy, retrieval and security. There are noisy channels to transmit the information. There are also …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 2, 2019 · pp. 34–38 Read article
-
Development and Characterization of Al2O3-SiC Graphite Reinforced Al7075 Hybrid Composite
Abstract: The aim of the present investigation is to carry out a study of mechanical properties of aluminium alloy (7075) reinforced with silicon carbide, aluminium oxide and graphite. This composite is produced by the vortex method. The constituents of the composite are mixed uniformly by stirring action. Due to rotation of a mechanical agitator, hence creating vertex by stirring of molten metal, then by adding ingredients, the product was produced. Then …
Published in Trends in Machine design · Vol. 6, Issue 2, 2019 · pp. 15–21 Read article
-
Analysis of fabrication methods on Mg-based MMCs –A Review
Abstract: Magnesium is an essential material for resolving the applications in automotive applications such as in the use of gearbox bearings, casting dies etc. In the current studies, various researchers have made efforts to improvise the casting methods and to invent new fabrication procedures for Mg metal matrix composites (MMCs). This paper shows a basic study of fabrication methods of Mg-based MMCs. Such as pressureless infiltration, mechanical alloying, stir casting etc. …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 101–108 Read article