Search
259 articles for “MWCNT/TPU nanocomposites”
Nothing matched all of your words, so these match any of them.
-
Fabrication and Characterization of Jute Fiber Reinforced PP-Clay-based Nanocomposites
Abstract: AbstractNanocomposite is a new concept in the field of plastic-based composites. Jute fabric (hessian cloth)-reinforced polypropylene (PP) composites with different nanoclays were prepared by compression molding. Jute fiber content in the composites was approximately 50%. Mechanical properties of PP-clay blend and PP-clay/jute fiber composites were characterized. It was found that 5% clay containing PP-clay/jute composites showed the best results. Tensile strength (TS), elongation at break (EB) and tensile modulus (TM) …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 19–29 Read article
-
Enhancement of Dielectric Properties of PVDF Composites with MWCNT and GCNF Fillers
Abstract: The paper discusses the role of multiwalled carbon nanotube (MWCNT) and graphitized carbon nanofibre (GCNF) in Polyvinylidene fluoride (PVDF) composites prepared by melt mixing method. Analytical studies were carried out using X-ray diffraction analysis (XRD) and Fourier transform infrared spectroscopy (FTIR) for understanding the role of fillers. Formation of β phase crystalline structure with a relative increase in β phase content is observed and is maximum at 5 wt.% of …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 43–52 Read article
-
Experimental Investigation for Strengthening the Nanocomposite Cementitious Materials with a Nanoscale Modification
Abstract: For the last few decades, researchers have widely used nanopolymer to control the mechanical properties of cementitious materials as a micro reinforcement. This paper examines and compares the mechanical and microstructure property of nanofiber cementitious material. Twenty-four sets of beam/cube cast with carbon nanofibers (CNFs) cementitious material where CNFs were used from 0.1%, 0.2%, and 0.3% of cement weight. The nanoparticles were scattered using a surfactant and an ultrasonic probe …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–24 Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article
-
Synthesis, Properties, Nanocomposites, and Electrochemical Applications of Polyaniline: A Review
Abstract: Polyaniline, also known as PANI, is a polymer in the that is becoming more significant for academics in the field of nanotechnology due to the potential uses it has in sensor technologies, optoelectronics, and photonics. PANI can be rapidly doped by a broad range of acids and dopants due to the ease with which it may be manufactured and its exceptional resilience in the natural environment. In this article, we …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 13–20 Read article
-
Current-Voltage Characteristics of 15-Atom Agnrs and Zcnts at Various Bias Voltages: Insights for Polymer Nanocomposite Applications
Abstract: The present research investigates the electronic properties of 15-atom Armchair Graphene Nanoribbons (AGNRs) and 15-atom Zig-Zag Carbon Nanotubes (ZCNTs) under applied bias voltages of 100, 200, 300, 400, 500, and 600 millivolts. Using the Non-Equilibrium Green's Function (NEGF) technique, the study analyzes various electrical features, including current-voltage (I-V) characteristics, to understand the behavior of these nanostructures. The findings reveal that AGNRs exhibit a larger bandgap than ZCNTs, which have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 135–144 Read article
-
Improved Photocatalytic Activity for Removal of Methylene Blue Dye from Aqueous Solutions with La2O3-Modified Ceria Heterostructured Binary Oxide Nanocomposite Particles
Abstract: The current study aimed to examine the photocatalytic efficacy of a bimetallic CeO2-La2O3 hetero-NC in comparison to monometallic CeO2 and La2O3 nanoparticles (NPs), utilizing Methylene Blue (MB)as pollutant sample under natural solar and UV irradiation. The coprecipitation method was utilized to produce a bimetallic CeO2-La2O3 hetero-NC. Following this, the nanostructures underwent characterization through various techniques including FT-IR, FE-SEM, XRD, UV Vis- DRS, Raman, and Photoluminescence spectroscopy. The catalytic activity of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 514–532 Read article
-
Electroactive Graphene–Polymer Nanocomposites for Self-Sustaining and Multifunctional Flexible Devices
Abstract: Graphene–reinforced polymer–composites were developed and systematically investigated to explore their multifunctionality in flexible electronic applications. The study specifically aims to correlate graphene-induced structure–property–function relationships with electroactive performance and self-sustaining behaviour in flexible devices. The hybridization of electroactive polymers—polyaniline (PANI), poly(3,4-ethylenedioxythiophene): polystyrene sulphonate (PEDOT:PSS), and polyvinylidene fluoride (PVDF)—with graphene nanoplatelets enabled simultaneous enhancement of electroactivity, energy-harvesting, and sensing functionalities. Morphological studies confirmed uniform graphene dispersion at 5 wt.% loading, forming continuous …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 260–271 Read article
-
Investigation of Bio-Physical Interaction and Electrophoretic Properties of Fe3O4/DNA Nanocomposite and Colloids for Biomedical Application
Abstract: In recent years, research on magnetic nanoparticles has gained significant attention. The core concept behind their physics lies in their interaction with biomolecules such as hemoglobin, DNA, and RNA. This study examines the fundamental forces involved in these interactions, including van der Waals attractions, electrostatic repulsion, thermal effects, and magnetic coupling between nanoparticles and biological molecules. To describe these interactions quantitatively, parameters such as zeta potential, magnetic moment density, and …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 3, 2025 · pp. 20–32 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Spin Coated Polyvinylidene Difluoride / Ionic Liquid Nanocomposite Thin Films with Enhanced Dielectric and Piezoelectric Properties
Abstract: This study introduces a novel approach to enhance the piezoelectric and dielectric properties of polyvinylidene difluoride (PVDF) by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) ionic liquid via a spin-coating method— a processing route that has been rarely reported for PVDF/ionic liquid composites. Structural and morphological analyses using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) confirm the successful integration of [BMIM][BF₄] into the PVDF matrix. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1190–1204 Read article
-
AI-Driven Inverse Design of Functionally Graded Bio-Nanocomposites for Sustainable High-Barrier Packaging
Abstract: Multilayer plastic packaging realizes high barrier performance through laminated heterogeneous structures, but the heterogeneous structure has severe end-of-life challenges caused by the interfacial incompatibility of materials and the poor recyclability. This study proposes the inverse design of functionally graded PLA-nanoclay composite films by reinforcement learning as a monolithic alternative to traditional multilayer systems. Twin-screw extrusion is designed as a continuous control Markov decision process, and proximal policy optimization (PPO) is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1547–1564 Read article
-
Enhancement in Biomedical Polymer Nanocomposites: Biocompatibility and Mechanical Property Predictions using Machine Learning
Abstract: A machine learning (ML)-based framework is developed and validated through experimental analysis and comparative modeling to enhance system dependability and improve prediction performance. The proposed framework includes key stages such as data preprocessing, feature evaluation, model training, and performance benchmarking to determine the most effective prediction technique. Several machine learning models were evaluated, including Ensemble models, Artificial Neural Networks (ANN), Decision Tree (DT), Random Forest (RF), Support Vector Machine (SVM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 275–296 Read article
-
Application of Poly (o-anisidine) Nanocomposite and PET Recycled Polyester Amide in Anticorrosive Coatings
Abstract: AbstractPolyethylene terephthtalate (PET) was depolymerized through aminolysis technique using ethanolamine into Bis (2-hydroxyethylene) terepthalamide (BHETA). BHETA is having hydroxyl functionality present in it so it is used as monomer and treated with sebacic acid using sulphuric acid as a catalyst. The synthesized resin having ester linkage present in it along with that in BHETA, amide linkage is also present hence it can be called as polyesteramide resin. This synthesized carboxyl …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 1–13 Read article
-
Taguchi Analysis of the Thrust Force and Delamination in Drilling of Glass Fiber Reinforced Epoxy/Clay Nanocomposites
Abstract: AbstractComposites are replacing several materials due to their superior properties such as high strength to weight ratio, high stiffness to weight ratio, better impact characteristics, corrosion resistance and design flexibility. Drilling is often required to facilitate the assembly of the parts to get the final product. However, drilling induced damage affects the quality of the drilled components. The present investigation is an attempt to study the effect of the cutting …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 14–23 Read article
-
On a Nanocomposite Metal Oxide Thin-film Transistor with Nanofilm Gate Dielectric Material: Material Chemistry, Sol–Gel Process and Electronic Worthiness
Abstract: ABSTRACT : ILO based MOTFT is fabricated with PBZ gate dielectric. PBZ is formed over doped Si substrate by cheap sol-gel process. Thin film PBZ is analysed with XRD, UV-Vis and AFM. IZO is used as bottom gate to contact TFT. This device needs only 5V as operating voltage, and so is good for lower electronics <40V. It shows excellent e-mobility 4.5cm2/V/s, with on/off ratio 5x105 and sub-threshold swing 0.35V/decade.
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 3, 2019 · pp. 8–12 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
Effect of Multiwalled Carbon Nanotubes on Compressive Strength of Concrete
Abstract: The objective of the suggested study was to examine the possible application of multi-walled carbon nanotubes (MWCNTs) as nano reinforcement to improve concrete's compressive strength. Single-walled carbon tubes (SWCNTs) and multi-walled carbon tubes (MWCNTs) are two groups of cylindrical-shaped carbon allotropes known as carbon nanotubes (CNTs). Tests are carried out 7, 14, and 28 days after the MWCNTs are reinforced in M20 grade concrete at 0.02% and 0.025% (by weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 01–08 Read article