Search
1981 articles for “composite Beta/MCM-41” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Comparative Analysis of Polymer-Enhanced and Conventional Magnetorheological Fluids in E-Bicycle Semi-Active Suspension
Abstract: In light of the increased use of electric bicycles as a sustainable transport means, various mechanical challenges emerge which were absent in traditional bicycles, primarily concerning vibration isolation and riding comfort. Indeed, hub motors, batteries and the entire drivetrain system produce dynamic excitations which passive suspension cannot handle effectively. This paper presents a comparison of conventional magnetorheological (MR) fluid and the polymer-based MR nanocomposite fluid within the context of semi-active …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1174–1185 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mass Production Tools and Process Readiness for Uniform Parts—Injection Molding Application
Abstract: A mass production always aims to produce uniform performing products. Production tools such as pressing dies, casting dies and injection moulds, play a significant role by producing uniform parts for achieving final products. Tool complexity increases when multiple cavities are present. These tools pass through several stages of quality maturation, before starting production, where the tool capability for part uniformity can be assessed, corrected and aligned to mass production variables. …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 30–40 Read article
-
Heat Integration of Crude Organic Distillation Unit using ASPEN PINCH
Abstract: chemical and petrochemical plants. In this article, the heat integration of crude organic distillation unit was elucidated with pinch analysis and ASPEN pinch simulating tool. Minimum utilities are calculated by constructing composite curves, shifted composite curves, grand composite curves and using problem table algorithm. Simulation studies include the effect of ΔTmin on hot and cold utilities requirement. Further Exergy losses are calculated by constructing Carnot composite curves and Carnot grand …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 35–46 Read article
-
Study of Tricalcium Phosphate Graft plus Platelet Rich Plasma in Bony Defects of Maxillofacial Area
Abstract: The present study was conducted at department of oral and maxillofacial surgery, career post-graduate institute of dental sciences and hospital, Lucknow with an objective to analyze the role of PRP in wound healing of maxillofacial defects along with beta-tricalcium phosphate as bone substitute and to compare the same with beta-tricalcium phosphate as bone substitute without PRP (Platelet Rich Plasma). A total of 30 subjects with maxillofacial bony defects were enrolled …
Published in Research and Reviews: A Journal of Dentistry · Vol. 7, Issue 1, 2016 · pp. 54–58 Read article
-
Parametric Design and Multi Objective Optimization of a Two-Axle Tipper Trailer Chassis for Enhanced Strength
Abstract: The primary objective of this project is to perform a detailed analysis of the chassis frame by considering variations in cross-sectional geometry as well as material composition. The frame structure includes main longitudinal members supported by a series of cross members, and the study focuses on optimizing both these elements. Material optimization is carried out by introducing composite materials in place of conventional ones, aiming to achieve improved strength-to-weight ratio. …
Published in Trends in Machine design · Vol. 13, Issue 2, 2026 · pp. 16–25 Read article
-
Statistical Optimization of the Medium for the Production of α-Amylase by the Mutant Aspergillus flavus MS-12 Using Response Surface Methodology
Abstract: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The present study is concerned with the improvement of Aspergillus flavus S-12 for α-amylase production. The mutant’s ability to produce α-amylase increased 1.24 times after …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 1, Issue 3, 2011 · pp. 13–23 Read article
-
Solid Propellant and its Effect on the Environment
Abstract: Normal 0 false false false EN-US X-NONE X-NONE Significant advances have been made during the last decade in the field of Space propulsion; various types of solid and liquid propellants are used in the rocket motor as fuel. In this paper we will discuss about the solid rocket propellant rather than the liquid one. Solid propellants are mostly heterogeneous (composite) made up of various ingredients which improve the burn rate …
Published in Journal of Aerospace Engineering & Technology · Vol. 2, Issue 2, 2012 · pp. 9–12 Read article
-
A Bayesian Case-Control Study to Study the Effect of Covariates in Gall Bladder Carcinoma
Abstract: The paper provides a Bayesian study to see the effect of different covariates in developing gallbladder carcinoma from a group of patients examined in the form of case-control scenario. The cases are those who have developed carcinoma from a group of gallbladder patients and the control are those who belong to the latter category but not in the former. The study has also been extended to evaluate the odds ratio, …
Published in Research and Reviews: A Journal of Medicine · Vol. 1, Issue 1, 2011 · pp. 1–24 Read article
-
Experimental Investigation on Tensile Characteristics of Hybrid Nanocomposite Joints by FSW with Optimized Welding Parameters
Abstract: Aluminium based nanometal matrix composites have emerged as highly promising class of materials in the field of materials domain, gaining importance mainly due to their low cost, isotopic properties and easy secondary processing. Cast aluminium matrix particle-reinforced composites have higher specific strength, specific modulus and good wear resistance when compared to unreinforced alloys. Continuous metal matrix phase facilitates controlled distribution of one or more nano-reinforcement materials. There are several conventional …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 9, Issue 2, 2019 · pp. 71–82 Read article
-
An In-Depth Analysis of Nanocomposites and Their Uses
Abstract: A nanocomposite material is composed of several phases with at least one, two, or three dimensions at the nanoscale. When material dimensions are shrunk to the nanoscale level, phase interfaces are created, and they are essential for enhancing the material's qualities. The surface area to volume ratio of the reinforced material used in the production of nanocomposites has a direct impact on our understanding of the relationship between structure and …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 24, Issue 3, 2022 · pp. 15–33 Read article
-
Response of Alfalfa (Medicago sativa L.) Varieties to NPS Fertilizer Rate in Mid Altitude of Southern Ethiopia
Abstract: Forage legume species adaptation has been done across Ethiopia; however, information on agronomic practice like fertilizer rate is generally scarce. So, the current study was to determine the influence of NPS fertilizer rate and varieties on dry matter yield, agronomic trait and nutritional value of Alfalfa at Werabe Agricultural Research Center (WARC). Experiment was applied factorial arrangement by using randomized complete block design with three replications. Fertilizer rates were (25, …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 10, Issue 3, 2021 · pp. 27–34 Read article
-
The Efficacy of two Organic Droppings (Poultry manure and Cow dung) on the Development, Nutrient Status and Yield of Radish (Raphanus sativus L.)
Abstract: A field experiment was conducted to evaluate the effect of two organic fertilizers on the growth, development, nutrient status and yield of radish (Raphanus sativus L.) The experiment was carried out in a Randomized Complete Block Design with three treatments (Poultry manure, Cow dung and control) and were replicated twice. The findings of this study indicate significant differences (P<0.05) in response to the different organic fertilizers applied. Hence, the growth …
Published in Research and Reviews : Journal of Crop science and Technology · Vol. 11, Issue 1, 2022 · pp. 27–36 Read article
-
Parametric optimization and validation of novel 3D scanning approach for sustainable manufacturing of patient-specific orthodontic retainers
Abstract: The purpose of the proposed study is to identify the ideal procedure parameters for 3D scanning a denture in order to produce customised orthodontic retainers that can be produced sustainably. However, pilot investigations rarely explore parameters like scanning angle, light intensity, or scanning distance. In order to lower acquisition error, the suggested study examines a method for forecasting the ideal values of the previously indicated scanning parameters. Based on the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 265–278 Read article
-
Sustainable Innovations in Home Decor: Exploring Eco-friendly Paint Materials and Recycled Interior Applications
Abstract: This paper delves into sustainable practices in home decorating, particularly focusing on eco-friendly paint products and innovative interior design solutions. It underscores the significance of zero-VOC and low-VOC coatings for indoor air quality and environmental safety, advocating for their use. Natural colors derived from plant extracts, clay, and minerals are highlighted for their biodegradability and availability in earthy tones, emphasizing their contribution to environmental sustainability. Milk-based paints are explored for …
Published in International Journal of Sustainability · Vol. 1, Issue 1, 2024 · pp. 10–20 Read article
-
Fluidic Engineering: Investigating Cutting Fluids’ Effect on Machined Surface Roughness
Abstract: The primary goal of this experimental study project is to determine the optimal cutting fluid by experimenting with two distinct oil kinds and compositions. Thirty-six compositions of cutting oil are obtained by mixing three distinct oil compositions, such as mineral oil and paraffin oil, with six different additive and anti-foaming agent compositions. Then, using a trial-and-error methodology, we employed these 36 cutting oil compositions for drilling operations with constant pressure …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 1, 2024 · pp. 27–42 Read article
-
Atomism Theory: Indian & Western Perspective
Abstract: The atomism and atomic theory are differentiated on philosophical and scientific basis, but the thing is to have some similarities. The Kanad’s theory came in 2nd century BC and the scientific atomic theory were proposed after 19th century. The ‘añu’ that was experimented by using microscopes, was already experienced and mentioned in the Vaisheshik sutra by Kanad. Here some important questions may be raised that, Is paramãñu by Vaisheshik and …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 87–95 Read article
-
Advancements in Waste Heat Recovery from Multistage Air Compressor Operations
Abstract: In industrial production processes, waste heat is an important consequence, especially in sectors that rely significantly on composites and polymers. Frequently, this heat is released into the atmosphere without being captured, which raises operating expenses in addition to wasting potential energy. In these sectors, waste heat recovery, or WHR, has become a key tactic for raising sustainability and energy efficiency. The WHR potential of multistage air compressors—essential parts of industrial …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 29–38 Read article
-
Analysis of Physical Properties of Polyethylene Terephthalate Coated Aggregates used in Bituminous Concrete Mixes
Abstract: The main cause of climate change that the world has been facing for several years is burning of plastic waste in open air. To contribute to solution of this problem, an investigation was carried out with utilization of plastic waste in bituminous mixtures used in flexible pavement.With varied amounts of Polyethylene Terephthalate (0%, 6%, 6.5%, 7%, 7.5%, and 8%) of asphalt content, variousdesirable properties of aggregates required for bituminous mix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 206–213 Read article
-
Geotechnical Influence Factors in Empirical Design of Highway Pavement: The A123 Ilorin – Lokoja Highway, Nigeria Case Studies
Abstract: Site investigation and application of geological and geotechnical influence factors on the highway were investigated. Method involved field sampling, geotechnical laboratory and x-ray diffraction analysis and use of SRTM extracted slope and drainage parameters; and their integration in a GIS based multi-criteria decision analysis to derive a subgrade suitability map as a design tool. The suitability criteria classified the highway into four (4) design sections. Section one for very low …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 53–70 Read article