Search
1934 articles for “RMSE of 0.052” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Electrical Conductivity and Antibacterial Studies on Chemically Synthesized Poly (2-Methyl Aniline-co-2-Chloro Aniline)-Blend-Polyurethane
Abstract: AbstractElectrically conducting copolymer blend, poly (2-methyl aniline-co-2-chloro aniline)-blend-polyurethane has been synthesized chemically by oxidative polymerization technique using 0.3 M ammonium persulphate (APS) as oxidant, 0.1 M of the anionic surfactant, sodium lauryl sulphate and 1 M HCl as dopant. The formation of the copolymer blend has been confirmed by comparison with the spectral data obtained for the copolymer which was synthesized under the same conditions and characterized. The copolymer blend …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 7–14 Read article
-
Fabrication and Characterization of Magnesium Matrix Nanocomposites Reinforced with Multiwall Carbon Nanotubes
Abstract: Multiwall Carbon Nanotubes (MWCNTs)-reinforced magnesium nanocomposites were fabricated through powder metallurgy route and then hot extruded as secondary process. CNTs were added by 0.5, 1 and 1.5 wt% with magnesium powders and ball milled to obtain a homogeneous mixture. The effect on mechanical properties of Mg nanocomposites due to the reinforcement of MWCNTs was investigated. The effect of mixing through high-energy ball milling, sintering temperature and extrusion process on the …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 17–21 Read article
-
Engineering Novel Blue Emissive Thiazolidinedione (TD) Poly Lactic Acid (PLA) Composite Thin Films for Bioplastic Scintillation
Abstract: In this article, we demonstrate luminescent properties of PLA blended with new 3-[2-(4-methylphenyl)-2-oxoethyl]-5-(thiophen-2-ylmethylidene)-1, 3-thiazolidine-2, 4-dione and 3-[2-(4-chlorophenyl)-2-oxoethyl]-5-(thiophen-2-ylmethylidene)-1, 3-thiazolidine-2, 4-dione (TD). This paper mainly aims at the preparation of intercalated thin films of PLA and TD. The formation of matrix-dopant composite films was confirmed by FTIR, SEM, TGA, DSC and XRD characterizations. This work really stands out from our previous work as TD has been better recognized as drug material in …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 10–23 Read article
-
An Approach to Mathematical Modelling of Tensile Strength of 3D Printed ABS Specimens
Abstract: In the present work the tensile properties of 3D printed Acrylonitrile Butadiene Styrene (ABS) are studied. Layer thickness, raster angle and raster width were varied. Experiments were carried out based on Taguchi’s L9 orthogonal array. Tensile strength of ABS specimens was determined from universal testing machine (UTM). Mathematical model was developed to predict the tensile strength of ABS. It is found that the predicted model has good fit with experimental …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 1–9 Read article
-
Cubic B-splines for Isogeometric Analysis of Laminated Composite Plates Subjected to Hygroscopic Loading Using Classical Laminated Plate Theory
Abstract: Composite laminates are inevitably used in several engineering structures due to their high strength and stiffness to weight ratio. The laminates are subjected to change in moisture content and the flexural behavior leads to change in the strength. Presence of moisutre may induce residual stresses and strains. Isogeometric analysis is a well-proven method to perform analysis of laminated composite plates. The main focus of this study is to apply isogeometric …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 19–32 Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box-Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 32–54 Read article
-
Influence of Bi2O3 on Physical, Optical and gamma radiation Properties of BaO-Bi2O3-B2O3-CuO and BaO-Bi2O3-B2O3-Fe2O3 glasses
Abstract: In this present work glasses with chemical composition 30BaO-XBi2O3-(69-X)B2O3-1CuO and 30BaO-XBi2O3-(69-X)B2O3-1Fe2O3 (X = 0, 5, 10, 15, 20 and 25 mole%) have been prepared and labeled as BBBC and BBBF series, respectively. Traditional quenching method was employed for making these samples. XRD diffractograms confirmed that the materials were amorphous. Physical, optical and structural properties were studied with the influence of Bi2O3 concentration. The density of both BBBC and BBBF series …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 20–31 Read article
-
Comparison of Bond Strengths of Nano and Microhybrid Flowable Composites for Orthodontic Bonding: An Invitro Study
Abstract: Introduction: When the orthodontic brackets are bonded to the etched enamel, the ideal orthodontic adhesive should have optimal bond strength and be able to withstand masticatory forces as well as orthodontic forces. At the same time, when the treatment is completed, the bracket should debond without causing any damage to the enamel. There have been many recent advances in composites in general and their applications in orthodontic use is questionable. …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 1–8 Read article
-
Application of Aqueous Two-Phase Systems in the Extraction of Bovine Serum Albumin
Abstract: Protein partitioning in an aqueous two-phase system (ATPS) has been found to be a powerful method for extracting and separating mixtures of biomolecules. In ATPS, many factors influence the partition coefficient K (which is the ratio of protein concentration in the top phase to that in the bottom phase) and the recovery percent (Rec%). Two systems of ATPS were used: first, polyethylene glycol (PEG4000)/sodium phosphate, and second, PEG4000/dextran. The behavior …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 41–50 Read article
-
Impact of various Fibers on the Mechanical and Durability Performance of Fibre-Reinforced Concrete with SBR latex
Abstract: Recent years included a proliferation of research efforts focused on fibre reinforced concrete (FRC), an innovation that perceives extensive application in the construction industry. FRC's enhanced mechanical properties ahead of conventional concrete have broadened its significance recently. Natural fibers have been produced in response to expanding environmental deterioration in recent years, and research is currently continuing with the goal of utilizing them in the construction field. This study explores the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 26–40 Read article
-
A high Regulated Low Ripple DC Power Supply based on LC Filter and IGBT
Abstract: Filaments operating at a high temperature region would require ripple free current constant power source for their heating purposes. Introduction of ripple in the power supply would result in high power loss, aberrant, unpredictable temperature rise etc. High current ripple can also extenuate the life of electrolytic capacitors used in the circuit. In this paper we propose a scheme in which we would not only use simple, low cost, easily …
Published in Journal of Power Electronics and Power Systems · Vol. 2, Issue 2, 2012 · pp. 1–10 Read article
-
Wall to Bed Mass Transfer in the Presence of Double Cone Promoter in a Three Phase Fluidized Bed with Conical Entry of Electrolyte
Abstract: AbstractInvestigations have been carried out experimentally to study the effect on wall-to-bed mass transfer coefficient in presence of double cone promoter in a three-phase fluidized bed with a conical entry of electrolyte. The system chosen was an electrolyte as liquid phase, glass spheres of different diameters as solid phase and inert nitrogen as gas phase. The electrolyte was an equimolar solution of potassium ferricyanide and potassium ferrocyanide each of 0.01 …
Published in Journal of Petroleum Engineering & Technology · Vol. 7, Issue 2, 2017 · pp. 39–43 Read article
-
Chemical Enhanced Oil Recovery Designed for a Local Sudanese Oil Field
Abstract: Chemical enhanced oil recovery (CEOR) is a method for increasing recoverable oil from reservoirs. For the past decade, several successful chemical injection projects have been carried out around the world. The SSA main oil field is a suitable candidate for CEOR methods, according to previous studies in a screening of EOR methods for Sudanese oil fields; the field is good OOIIP 161.18 MMSTB, with only 23 percent produced. The general …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 1, 2022 · pp. 34–43 Read article
-
Life Expectancy Rate and Health Facilities in Kachchh District
Abstract: After earthquake due to industrialization, population is growing; so many private hospitals have opened for treatment of different diseases. But the rural areas are deprived of health facilities. In rural areas, 55.50% samples of families agreed that they had suffered from one or the other type of addiction. About 75% samples of rural families do not get pure drinking water. About 72% samples of families agree that they live in …
Published in Journal of Production Research & Management · Vol. 2, Issue 1-2-3, 2012 · pp. 66–78 Read article
-
A Review of Semiconductor Solar PV Cell and Development of Solar Radiation Estimation Models
Abstract: Today’s life could not be imagined without energy (Power). It has become an integral part of day to day life. Traditionally, dependency was there on conventional sources of energy like coal, hydroelectric etc. But they are limited resources; also, they offer residue or pollution to the environment which is not desirable. These are the main reasons that the researchers inclined themselves towards the maximum exploration and make optimal use of …
Published in Journal of Semiconductor Devices and Circuits · Vol. 5, Issue 1, 2018 · pp. 20–26 Read article
-
Schmitt-Trigger Based 12T SRAM Cell with Enhanced Stability
Abstract: In this work, we present a single-ended Schmitt-trigger (ST) based 12T static random access memory (SRAM) cell. The proposed cell employs cross-point data aware write structure, and thus supports bit interleaving architecture to mitigate soft errors. The proposed cell does not suffer from read disturbance as bit line is completely isolated from bit storage node. Simulation is done on 180 nm CMOS technology on Cadence. Read static noise margin (RSNM) …
Published in Journal of Semiconductor Devices and Circuits · Vol. 5, Issue 1, 2018 · pp. 5–10 Read article
-
Physical Characterization of New Li-Ion Conducting NASICON Materials in the LI1+2XTA1-XALX+1(PO4)3 System
Abstract: AbstractFabrication of all-solid-state Li battery with non-flammable ceramics electrolyte has been strongly required to overcome safety issues of present Li batteries. One of the promising structures of ceramic electrolyte in solid state battery is the NASICON structure composed of 3 dimensional frameworks (s.g. R-3c). In this study, Li-ion conducting mixed metal phosphate Li1+2xTa1-xAlx+1(PO4)3, L Ta A P-x(x = 0 ~ 0.5) solid electrolyte that possess rhombohedra NASICON structure was prepared …
Published in Journal of Semiconductor Devices and Circuits · Vol. 6, Issue 3, 2019 · pp. 25–32 Read article
-
Behaviour of Three Legged 400 kV Double Circuit Steel Transmission Line Tower by Using Different Diaphragm Comparative Study
Abstract: Power is a vital solution for the growth of any country’s economy. India has the third largest producer of power in the world. As per the Census and Economic Information report, India has 1,06,991 GWh power capacity up to Mar. 2019. So, optimizations of transmission line towers are vital to reduce the cost the power sector and it’s depending on various factors, i.e. materials, size and shape of the section, …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 20–31 Read article
-
Building Behaviour on Sloping Ground With & Without Diaphragm: Earthquake Zone-IV
Abstract: The period 1996 to 2015, 7,056 disasters recorded worldwide. 1.35 million People killed by natural hazards over the past 20 years, more than half died in earthquakes. The poorest nations paid the highest price in terms of the numbers killed per disaster and per 1,300,000 populations. Earthquake load is major effect on buildings especially on sloping grounds. Earthquake zone-IV is twice times more dangerous compare with zone-III. In the present …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 47–55 Read article
-
Experimental Investigation of Self-Compacting Concrete Using Coir Fiber
Abstract: Concrete is the construction material widely used throughout the world. Construction materials used in the industry should be friendly with the environment during their usage. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It is able to flow under its own weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogenous …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 6–12 Read article