Search
353 articles for “tensile mechanical strength”
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Polymer Matrix-Based High-Performance Thermoplastic Composites for Automotive Applications: Design, Characterization, and Interface Behavior
Abstract: The study emphasizes the role of high-performance thermoplastic polymer matrices such as PEEK, PPS, and PA6, selected for their superior thermal stability, mechanical strength, and recyclability in automotive environments. The expanded usage of electric vehicles (EVs) and self-driving transportation creates a demand for advanced materials which are weight-conscious yet high in strength relative to their weight, impact-resistant yet still being environmentally friendly. This study aims to create and define fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 216–237 Read article
-
Design and Synthesis of Functionalized Copolymers for Enhanced Interfacial Compatibility in Polymer Matrix Composites
Abstract: Interfacial adhesion between the polymer matrix reinforcing phase affects significantly the mechanical and thermal behavior of polymer composites. The study reports on the design and synthesis of functionalized copolymers in the efforts to establish interfacial compatibility based on chemical design. The reinforcements were functionalized doping polar functional groups such as glycidyl methacrylate and maleic anhydride during free-radical copolymerization to form copolymerizing reactive sites that interacted with the reinforcement surfaces. Confirmation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1404–1418 Read article
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Experimental Investigation of OPC Concrete with Incorporation of Glass Powder as Partial Substituent Material.
Abstract: This study presents an experimental survey aimed at evaluating the viability of incorporating glass powder (GP) as a partial substitute for cement in concrete matrix. The research focuses on assessing the effect of this sustainable alternative in concrete by investigating the various properties of fresh concrete such as workability, mechanical and durability aspects. Specimens were prepared with GP replacement to cement at 5%, 10%, 15%, and 20% levels, with comparative …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1058–1068 Read article
-
Investigation on Tensile Properties of Redwood PLA Using FDM Process
Abstract: Fused Deposition Modeling (FDM) is an additive manufacturing technique employed to construct comprehensive 3-dimensional models using a variety of materials, catering to diverse applications. This study explores the fabrication of REDWOOD polylactic acid using (FDM) additive manufacturing processes. REDWOOD PLA, recognized for its biodegradability and renewable sourcing, holds promise as an eco-friendly material for 3D printing applications. The research investigates the tensile properties of REDWOOD polylactic acid (PLA) fabricated through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 668–673 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Development and Performance Evaluation of Polymer-Modified Geopolymer Composites Incorporating GGBS
Abstract: This research investigates the development and performance of geopolymer-based composite materials formulated using Ground Granulated Blast Furnace Slag (GGBS) as a reactive mineral component within an aluminosilicate polymer matrix. The study aims to create an eco-efficient and structurally sound inorganic polymer composite comparable to M35-grade concrete, produced entirely under ambient curing conditions. A series of mixes with varying GGBS replacement ratios (0–100%) was prepared, maintaining a constant binder content of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1145–1165 Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
Machine Learning Assisted Design and Analysis of Polymer Composite Materials for Sustainable Renewable Energy Systems
Abstract: Accurate prediction and optimization of polymer composite properties is of paramount importance in the design of these lightweight, durable, and sustainable materials within renewable energy technologies. This work will provide a holistic machine learning-assisted framework that unites materials informatics with domain-specific features and state-of-the-art ML methodologies in the prediction of the mechanical properties of polymer composites, such as tensile strength. This includes embedding several ensemble models, including Random Forest and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 391–402 Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
To Study Properties of Concrete by Using Manganese Ore Aggregate
Abstract: Aggregate is one of the major ingredients of the concrete and the maximum part of strength of the concrete is governed by the aggregate. And thus, partial or total replacement of it can change the physical as well as the chemical properties of the concrete. Nowadays researchers are quite interested in obtaining the more durable and more resisting concrete to the diverse climatic conditions. In this research, aggregate is proportionately …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 38–45 Read article
-
Thermal and Mechanical Properties of Zn-Fap Composites
Abstract: The aerospace and automotive industries have experienced a substantial surge in interest in innovative composite systems driven by the ongoing demand for lightweight, high-performance materials. In this study, the mechanical properties of zinc (Zn) matrix composites reinforced with fluorapatite particles (Fap) are examined as a function of thermal treatment. Within the context of this investigation, we endeavoured to create composite materials containing Zinc-Fluorapatite powder. Stir casting was used to produce …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1101–1110 Read article
-
Mechanical Properties of Rice Husk Ash Based Concrete Composites
Abstract: The production of rice is important all over the world. The husk that is made is usually used as a combustible material to prepare fields, giving energy through both direct combustion and gasification. The material rice husk ash may be quite fine. A common particle size for rice husk ash is 3 to 75 µm. This research demonstrates how the rice husk ash affects the mechanical properties of concrete composites. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 67–72 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article