Search
124 articles for “crystal structure”
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Comparison Analysis of Transformer Boosting and Induced Degeneration Topology Design of LNA for Millimeter Wave Frequency Range Using Polymeric Substrates
Abstract: In this study, a comparison between transformer boosting and source degeneration LNA topologies is conducted using two polymeric substrates—Polyimide (PI) and Liquid Crystal Polymer (LCP)—for millimeter-wave (mmWave) applications. With growing interest in flexible and high-frequency electronics, polymeric materials offer unique advantages such as low dielectric constants, mechanical flexibility, and thermal stability. The analysis explores gain, return loss, and noise figure performance while evaluating the influence of dielectric properties on the …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 2, 2025 · pp. 1–24 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
Exploring Polymer Biocomposite as a Sustainable Filter for Water Treatment
Abstract: The present study explores the utilization of polylactic acid (PLA), a renewable polymer combined with surface-modified nanocellulose (SMNC), and pectin derived from Borassus flabellifer leaves and fruits respectively. Existing methods of filtration are synthetic and affect the environment and public health at an alarming rate thereby making biopolymer-based membranes a greener and effective approach for water treatment. PLA-SMNC-pectin biofilm was fabricated using 88.5 mg PLA, 3.5% (wt. % of PLA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 594–608 Read article
-
Self-Healing Polymeric Composites Reinforced with Green Synthesized Nanoparticles
Abstract: The development of sustainable self-healing polymeric materials is critical for enhancing durability and service life in advanced engineering applications. In this study, zinc oxide (ZnO), magnesium oxide (MgO), and ferric oxide (Fe₂O₃) nanoparticles were green-synthesized using Allium cepa extract and incorporated into epoxy-based polymeric composites to improve mechanical, thermal, and self-healing properties. This bio-based synthesis is eco-friendly and safe alternative to harsh chemical techniques, utilizing natural antioxidants to stabilize the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 305–314 Read article
-
Guanidine as a Starting Material for Preparing a Scale Inhibitor
Abstract: Oilfield scale inhibition, which can obstruct fluid flow in pipelines, valves, and pumps during oil production and processing, is critical for preventing scale formation. Effective scale inhibitors (SIs) minimize downtime and enhance productivity by preventing the build-up of insoluble crystals in water systems. In oil processing, scale formation results from the precipitation of salts due to incompatible aqueous phases, leading to equipment blockage. Phosphonates are highly effective chelating agents for …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 15–28 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Multifunctional and Photocatalytic Properties of DyFeO₃/Dy₃Fe₅O₁₂ Biphasic Nanoparticles
Abstract: Rare-earth orthoferrites constitute a class of compounds that exhibit remarkable magnetic, optical, and electronic properties across a wide temperature range. In the present study, a dysprosium-based orthoferrite containing dual phases of DyFeO₃ perovskite and Dy₃Fe₅O₁₂ garnet was successfully synthesized via the co-precipitation technique. X-ray diffraction (XRD) analysis was employed to investigate the structural configuration of the synthesized material. The diffraction pattern confirmed the formation of a biphasic composite comprising orthorhombic …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 41–54 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Synthesis and Photoluminescence Dynamics of Europium (III) and Terbium (III) Co-doped of GdSrAl3O7 Color-Tunable Nanophosphors
Abstract: A series of Europium (III) and Terbium (III) co-doped GdSrAl3O7 color-tunable nanophosphors were synthesized by a simplistic, streamlined and self-propagating, urea-assisted solution combustion synthesis process. The structural and luminescence characteristics of synthesized Eu3+/Tb3+ co-doped Gadolinium Strontium Aluminate nanocrystalline phosphors were validated using powder X- ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X- ray analysis (EDAX), and photoluminescence spectra studies. The morphological studies revealed that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1069–1082 Read article
-
Fabrication, Mechanical Characterization and Biodegradation Analysis of Polylactic Acid Based Composite for Medical Sutures
Abstract: Wound closure is surgical aids relies heavily on sutures, which help maintain proper tissue alignment and supporting healing. The effectiveness depends on factor such as the type of wound, required mechanical strength, risk of infection and characteristics like absorbability and thickness of the martial. The efficacy of sutures is determined by their material properties and structural characteristic’s, which affect their mechanical properties. The primary objective of this study was to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Differential Scanning Calorimetry, Thermogravimetric Analysis, and Dynamic Mechanical Analysis for Advanced Medical Materials
Abstract: Modern healthcare depends on advanced medical products that come up with new ways to care for and help patients. Characterizing these products is important to make sure they are safe, effective, and work well. While there are many analysis methods, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and Dynamic Mechanical Analysis (DMA) are the most important ones for checking the temperature and mechanical qualities of medical materials. By measuring the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 57–72 Read article
-
Engineering Sustainable Interior Materials: Performance Analysis of PLA Composites Reinforced with Banana Stem Fiber and Spent Coffee Grounds
Abstract: This study presents the development and classification of eco-friendly composite panels reinforced with spent coffee grounds (SCG) and banana stem fibers (BSF) for interior applications. Hybrid composites were fabricated using polylactic acid (PLA) as the matrix with a constant filler loading of 30 wt%, varying BSF:SCG ratios (70:30, 60:40, 50:50). Mechanical testing revealed that the 70:30 composite exhibited the highest tensile strength (42 MPa) and flexural strength (58 MPa), whereas …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 94–105 Read article
-
A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition
Abstract: In the proposed work, Zinc oxide nano particles (ZnO NP's) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal decomposition. The samples are characterized using X- ray diffraction (XRD), UV visible spectroscopy (UV-Vis), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD pattern exhibit single-phase polycrystalline nature of all the samples exhibiting the most intense peak at (101). The diffraction peaks are located at 31.80, 34.46, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 39–45 Read article
-
Nanocomposites of Polyethylene-Closite 20A: Preparation and Characteristics
Abstract: Low-density polyethylene/closite 20A nanocomposites with different organoclay contents were made in the current study by a melt mixing technique with two different compatibilizers of varying contents: low molecular weight oxidized polyethylene and low molecular weight trimethoxysilyl modified polybutadiene. The inclusion of compatibilizers and concentrations of organoclay were analyzed in relation to the mechanical and thermal properties of the nanocomposites. The dispersibility of the silicate clay in the nanocomposites was investigated …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 1, 2025 · pp. 01–12 Read article
-
An overview of Nanocrystalline Hydrogenated Silicon Thin film Transistor
Abstract: This article elaborates and comprehends an overview on nc-Si:H TFT's, detailing and highlighting the topics like fabrication methodology, properties/stability, modelling, characterization techniques, challenges and futuristic scope/applications.With the growing demands in commercialization of Solar Cells (low-cost photo voltaic devices), Large Area Displays (like OLED’s), Thin film electronics (FPD applications), pixel switches, wearable/flexible electronics and so on, has prompted researchers to develop nc-Si:H TFT's (an alternative solution) which can out perform the …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 1–23 Read article
-
Influence of SlS Parameters on Strength and Fatigue Durability of Polyamide-12
Abstract: Selective Laser Sintering (SLS), a laser-based polymer powder bed fusion process, has gained prominence in the fabrication of high-performance thermoplastics such as Polyamide-12 (PA12). This paper provides an extensive review of how key SLS process parameters—such as laser power, scan speed, hatch spacing, and energy density—affect the mechanical properties of PA12 components, with a specific focus on tensile strength and fatigue resistance. Studies demonstrate that increasing energy input enhances particle …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 178–191 Read article
-
Electroactive Graphene–Polymer Nanocomposites for Self-Sustaining and Multifunctional Flexible Devices
Abstract: Graphene–reinforced polymer–composites were developed and systematically investigated to explore their multifunctionality in flexible electronic applications. The study specifically aims to correlate graphene-induced structure–property–function relationships with electroactive performance and self-sustaining behaviour in flexible devices. The hybridization of electroactive polymers—polyaniline (PANI), poly(3,4-ethylenedioxythiophene): polystyrene sulphonate (PEDOT:PSS), and polyvinylidene fluoride (PVDF)—with graphene nanoplatelets enabled simultaneous enhancement of electroactivity, energy-harvesting, and sensing functionalities. Morphological studies confirmed uniform graphene dispersion at 5 wt.% loading, forming continuous …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 260–271 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article