Search
296 articles for “cement concrete”
-
A Study on Strength and Durability of Fly Ash–Metakaolin Blended Geopolymer Concrete
Abstract: Production of cement causes 8% of the total carbon dioxide emissions in the world. Finding a right alternative to cement is the need of the hour, to eliminate environmental pollution caused by cement production. A substitute for conventional concrete can be industrial waste products like GGBS, Flyash, Metakaolin, and so on, these mineral admixtures can be used to fully replace cement with some activators this mix of mineral admixtures and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 51–59 Read article
-
Modeling and Simulation to Monitor Stress–Strain Behaviour from Partial Replacement of Fly Ash and Alccofine on High Developed Concrete Strength
Abstract: This paper monitors the behaviour of stress-strain on model concrete that partially replace cementwith alccofine and fly ash, the stress-strain in concrete normally distort some level of determinant onthe extent of load, the values of strain in concrete is of immense imperative, because it stands for theinflexibility in terms of structural design, the study try to show some rate of stress development onconcrete that monitor lasting deformation if limits that …
Published in Journal of Offshore Structure and Technology · Vol. 8, Issue 1, 2021 · pp. 10–25 Read article
-
Enhancing Concrete Performance Through Ternary Mixtures: Utilizing SCBA and Silica Fume for Sustainable Construction
Abstract: This study investigates the effects of incorporating Sugarcane Bagasse Ash (SCBA) and Silica Fume (SF) as supplementary cementitious materials on the properties of concrete. Compressive strength, split tensile strength, and water absorption characteristics of ternary blended concrete mixes containing varying proportions of SCBA and SF were examined at curing periods of 7, 28, and 56 days. The results reveal that up to 15% SCBA replacement and 10% SF addition led …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 6–12 Read article
-
Influences of Silica Fume to Engineering Properties of High Volume Fly Ash Concrete (HVFC)
Abstract: High volume fly ash concrete (HVFC) is one kind of the most promising concrete materials in the 21st century. HVFC has special properties such as high flowability, mechanical strength meets the requirements of contruction standards, low permeability, high durability, and others. Furthermore, HVFC is able to continuously develop strength during long time because the high activity alumina-silicates in the fly ash particles are dissolved slowly and prolong. Therefore, this study …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 33–44 Read article
-
Assessing the Performance of Sugarcane Bagasse Ash with Portland Pozzolana Cement
Abstract: Cements which are used for construction work are generally OPC/PSC or PPC and the production of this kind of cement not only consumes huge amount of the natural resources i.e. limestone and fossils fuel, also the world cement production generates 2.8 billion tons man-made greenhouse gas annually. The uses of the industrial and agricultural wastages in concrete partly as cement or any other ingredients replacement are therefore eco-friendly, economic and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 6–9 Read article
-
Structure–Property Modeling of Cement-Based Multi-Component Composites Using Ensemble Machine Learning and Explainable Feature Attribution
Abstract: Accurate prediction of compressive strength is central to structure–property optimization, quality control, and sustainability-driven design in cement-based composite materials. Cementitious systems represent heterogeneous multi-phase composites composed of reactive binder matrices and dispersed aggregate phases, whose macroscopic mechanical performance emerges from complex nonlinear interactions among constituents and curing-dependent microstructural evolution. This study develops a data-driven structure–property modeling framework to quantify the nonlinear dependence of compressive strength on multi-component composite composition and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 112–131 Read article
-
Performance of Sisal Fiber Concrete Using Fly Ash and Silica Fume Enhancements
Abstract: The construction industry has advanced significantly in constructing innovative structures using diverse materials. Various waste materials such as fly ash, sawdust, and residues of natural fibers have been utilized in the construction industry. Addressing these concerns requires exploring low-cost, environmentally friendly, and sustainable materials. This paper aims to investigate mixing silica fume, fly ash, and sisal fiber into concrete to address waste disposal and global warming issues while creating stronger …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 63–74 Read article
-
Cenosphere Based No Aggregate Floating Concrete
Abstract: Concrete is an excellent building material, used widely around the world, but the only disadvantage of concrete is that it has self-weight. This self-weight does not allow concrete to be used in light-weight structures. In this work, mix design is prepared in such a manner that density of concrete is less than that of water and hence concrete can float on water and therefore it is termed as floating concrete. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 43–48 Read article
-
Improving Highway Surface Course Properties of Asphalt Concrete for Heavy Traffic Loading using Mineral Fillers
Abstract: Failure signs seen on both rigid and flexible pavement as distresses is most often instigated by mix properties of the surface due to many factors. Traffic loading, Stripping or raveling is another possible cause of such effects. Stripping occurs when poor adhesion between asphalt cement and aggregate allows the aggregate at the surface to dislodge. As a result, mineral fillers in hot-mix asphalt concrete to obtain certain desirable properties has …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 12–22 Read article
-
Experimental Investigation of OPC Concrete with Incorporation of Glass Powder as Partial Substituent Material.
Abstract: This study presents an experimental survey aimed at evaluating the viability of incorporating glass powder (GP) as a partial substitute for cement in concrete matrix. The research focuses on assessing the effect of this sustainable alternative in concrete by investigating the various properties of fresh concrete such as workability, mechanical and durability aspects. Specimens were prepared with GP replacement to cement at 5%, 10%, 15%, and 20% levels, with comparative …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1058–1068 Read article
-
TO STUDY THE EFFECT OF PARTIAL REPLACEMENT OF CEMENT WITH MARBLE POWDER AND PARTIAL REPLACEMENT OF SAND WITH SURKHI
Abstract: The construction industry worldwide has made remarkable progress in building innovative structures using different materials. Today’s increasing population demands more sustainable ways of living. Waste matter produced in the day-to-day life as well as industrial waste has become a cause of concern. Many waste materials have been used in construction industry like flyash, saw dust, natural fibers residue etc. Keeping in mind the above concern a low cost, environment friendly …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 46–54 Read article
-
Retrofitting of RC Beams Using FRP and FRCM
Abstract: The deterioration of reinforced concrete (RC) structures due to various factors such as aging, aggressive environments, or increased loads poses significant challenges to structural integrity and safety. Retrofitting techniques have emerged as effective solutions to enhance the structural performance of existing RC members. Among the retrofitting options, the use of Fibre Reinforced Polymer (FRP) and Fibre Reinforced Cementitious Matrix (FRCM) systems have gained considerable attention in recent years. The study …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 31–40 Read article
-
Exploring the Synergy of High Performance Composite Concrete Strength and Sustainable Construction Practice
Abstract: This research evaluates how the combination of industrial waste materials optimizes composite concrete structure strength and services the interests of sustainable construction development. This research examines two major environmental problems stemming from ordinary Portland cement clinker manufacturing and landfill accumulation of non-biodegradable porcelain waste. The research employed alccofine dosage of 16% as a supplementary cementitious material (SCM) with high pozzolanic activity to combat these problems. Processed porcelain waste aggregates filled …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 47–58 Read article
-
Experimental and Behavioral Study on Fly Ash Along with Lime to Make Bricks for Low Cost Housing Techniques
Abstract: Fly ash is the waste material which is usually dump or used in concrete today as admixture and also replace by cement in concrete proportion and give equivalent strength to structure. A lot of research has been carried out for effective use of fly ash. As we know today fly ash bricks overcame to normal clay burnt bricks in all parameters like compressive strength, water absorption, durability, mortar profit, finishing …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 30–41 Read article
-
Strength of Geopolymer Concrete by Replacement of Fine Aggregate with Waste Steel Slag
Abstract: AbstractThe increased production of Portland cement causes great concern to environment because of its high carbon foot print. Geopolymer concrete is a new invention in the world of concrete in which cement is totally replaced by industrial waste and byproducts like fly ash. Geopolymer concrete is environment-friendly material for construction because of its reduced carbon foot print and also it is found to be durable. In this study, strength and …
Published in Journal of Geotechnical Engineering · Vol. 1, Issue 1, 2014 · pp. 15–19 Read article
-
CARBONCURE AND WAYS TO REDUCE CO2 EMISSIONS IN CEMENT MANUFACTURING INDUSTRY
Abstract: Why don’t we halt for a minute to think about the climatical change happening around the globe? Increase in temperature, the release of carbon dioxide, let it be whether from the burning of fossil fuels such as oil, coal, deforestation or manufacture of cement.With the increase in population, the growth of industries and change of lifestyle, majorconstruction is taking place everywhere which leads to mass production of cement and is …
Published in Journal of Industrial Safety Engineering · Vol. 6, Issue 1, 2019 · pp. 15–19 Read article
-
Revolutionizing Geopolymer Composites: Unveiling Intelligent Wall Facades and Precision PZT Sensors for Vibration Analysis
Abstract: Evaluating the mechanical performance and environmental benefits of geopolymer composites is imperative for sustainable alternatives in construction. This study presents an innovative circular PZT-based sensor that effectively captures transient vibrations within concrete structures, demonstrating its validity in comparison to standard surface-mounted accelerometers. The research also elucidates the influence of sensor orientation on capturing various vibrational modes of concrete. Furthermore, the embedded PZT sensors provide valuable insights into the evolving mechanical …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 59–73 Read article
-
Effects of Carbon Fiber on Strength of Concrete
Abstract: Experimental investigations were carried out to evaluate the effect of carbon fibers on strength of concrete. The concrete mix of M-25 grade was considered and produced by replacing carbon fibers with cement. Modified concrete is produced by adding carbon fibers with various percentages as 0 to 0.6% at an interval of 0.2% with 10 and 20 mm in length. The compressive and flexural strengths are considered for investigations. Cube of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 1–8 Read article
-
Development of sustainable GGBS and FLYASH based Geo-polymer Concrete
Abstract: Construction has been most important human activity since ancient time. Concrete is widely used and trustworthy material for construction. Some of challenges in industry are global warming and insufficiency of construction material. One of the methods for replacing concrete constituents is the use of geo-polymer which helps in using very less quantity of cement in concrete. This project represents study on the mechanical properties of geopolymer concrete with various mixes. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 6–11 Read article
-
Incorporating Fly Ash into Road Construction: Sustainable Infrastructure Development
Abstract: With the rapid pace of industrialization and urbanization, there has been a concerning surge in the demand for cement usage. Simultaneously, the substantial production of fly ash and pond ash from thermal plants has led to environmental pollution. To address these pressing issues, the effective utilization of fly ash through partial cement replacement in high-strength concrete has emerged as a viable solution. Experimental investigations have demonstrated the feasibility of this …
Published in Trends in Transport Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 14–22 Read article