Search
1727 articles for “and temperature”
-
Real-Time Temperature Control System and Performance Exemplification with Conventional PID
Abstract: In process control industries, automatic controllers are introduced. PID (Proportional-Integral-Derivative) controllers are the work horses of many industrial controller applications. Significant research work has been carried out to improve the performance of closed loop response with a PID controller so that it can be used for real time temperature control system. Also performance of a PID controller is investigated for different performance metrics such as Integral Square Error (ISE), Integral …
Published in Journal of Control & Instrumentation · Vol. 6, Issue 1, 2015 · pp. 31–36 Read article
-
Design of Differential Evolution Optimized PI Controller for a Temperature Process
Abstract: Differential evolution is a new stochastic population-based optimization algorithm. It is an accurate, fast and robust optimization method. In this paper, a PI controller is used and differential evolution optimization technique is used to optimize the controller parameters. The robust controller parameters are obtained by solving the optimization problem, which consists of objective functions and constraints, using differential evolution method. Here differential evolution is implemented in tuning of a PI …
Published in Journal of Control & Instrumentation · Vol. 3, Issue 1-3, 2012 · pp. 17–26 Read article
-
Urban Planning Mitigation Trajectories for Urban Heat Island (UHI) A Case Study of Guntur, Andhra Pradesh, India
Abstract: AbstractGlobal radiation related solair-temperature directly influences Urban Heat Islands (UHI) as the built environments and surrounding atmosphere cause increase in urban solair temperatures, the resulting temperature completely depends on the thermal properties of the exposed materials. Urban heat islands can lead to deterioration of flora and fauna, elevation of ground level ozone, health disorders and increase in building energy consumptions. The study area of Guntur region which is susceptible to …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 2, 2018 · pp. 12–29 Read article
-
Evaluation of SAR and Temperature Elevation in Human Head for Advanced Wireless Services (AWS) Application
Abstract: In this paper, the specific absorption rate (SAR) and the temperature rise in the SAM phantom human head model as a consequence of the exposure to radiation of planar inverted F (PIFA) mobile handset antenna has been estimated at Advanced Wireless Services (AWS) band downlink frequency range. Biological hazards on human head owing to electromagnetic wave (EMW) exposure in advanced wireless services has been analyzed by computing the temperature rise …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 3, 2016 · pp. 19–24 Read article
-
Optimization of Consolidation Temperature and Time for Self Reinforced High-density Polyethylene Composite
Abstract: Demand for high-density polyethylene (HDPE) for industrial production of domestic and commercial commodities has made it necessary to find ways of improving its mechanical properties. A viable approach towards this is the addition of reinforcements such as glass fibers. However, glass fiber reinforced composites suffer limitations because of reduced recyclability, great weight and difficult to thermo-form. In order to improve properties such as specific strength, stiffness and thermoformability of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 1, 2021 · pp. 19–26 Read article
-
Effect of Annealing Temperature on the Structural, Morphological and Electrochemical Properties of Ruthenium Oxide Electrodes
Abstract: Transition metal oxide thin films are in great demand for a variety of technical applications, Ruthenium oxide is one of them having distinct structural, optical, chemical, and electrical properties. The structural and morphological characterization of Ruthenium oxide thin film electrodes created using the sol-gel spin coating process is covered in this work. For annealing, temperatures between 200°C and 900°C were employed. To examine electrochemistry, cyclic voltage measurement and chronopotentiometry were …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 15–24 Read article
-
LabView Based Control System Design for Water Tank Heater System
Abstract: This paper presents the control system design for water tank heater system (WTHS) with the help of LabVIEW and Arduino UNO R3 based Atmega328 microcontroller to regulate the temperature of water inside the water tank heater system to a certain reference value. In the process control system, the accurate measurement of the temperature is not an easy task. The aim of this work is to develop a low-cost and flexible …
Published in Trends in Electrical Engineering · Vol. 7, Issue 3, 2017 · pp. 31–40 Read article
-
Evaluating the Influence of Temperature on the Efficacy of Capparis Decidua Extract as a Corrosion Inhibitor for Aluminium in Acidic Media
Abstract: The study investigates the anti-corrosive properties of the ethanolic extract of Capparis decidua fruit on aluminum corrosion in a 2N HCl acid solution, using a weight loss technique at temperatures ranging from 303 to 343 K. At a concentration of 0.45%, the inhibition efficiency (η%) is notably high, reaching 63.15% at 303 K. The inhibitor's adsorption behavior on the aluminum surface is consistent with the Langmuir adsorption isotherm, suggesting that …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 3, 2024 · pp. 58–65 Read article
-
Effect of Radiation Dose, Dose Rate and Annealing Temperature on Edible Potato Starch by Spectroscopic Methods
Abstract: Potato starch (PS) is a favorite food choice in different forms. During its storage and applications the PS is exposed to different radiations. In the present study the authors attempt to compare radiation effects (gamma and Electron beam of same radiation dose) in PS by Electron spin resonance (ESR) and Fourier transform infrared (FTIR) methods. ESR spectra of gamma irradiated PS appeared to have resolved shapes than the electron beam …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 198–209 Read article
-
Enhancement of Gas Sensitivity of Composites of Carbon Derived from Rubber Tree and SnO2 to Detect Ethanol Vapor at Room Temperature
Abstract: Films of composites of activated carbon powder prepared from saw dust derived from core of rubber tree (Hevea Brasiliensis) and tin oxide (SnO2) were fabricated using the doctor blade method. Carbon powder was activated using phosphoric acid at 500°C for 45 minutes. The weight ratio carbon/SnO2 varied from 0 to 12% in steps of 2. The structural, optical and morphological properties of films were investigated using XRD patterns, UV-visible spectrums …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 31–44 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Automatic Gate Based on Facemask and Temperature Detection
Abstract: The coronavirus COVID-19 pandemic has been spreading over the world for months and is producing a serious health problem. According to the World Health Organization, wearing a face mask in all situations where people are congregated is a beneficial and safe strategy (WHO). India's large population would make it difficult to prevent the coronavirus from spreading. Face masks and sanitizers are the most effective methods of preventing transmission. When it …
Published in Current Trends in Signal Processing · Vol. 13, Issue 2, 2023 · pp. 24–37 Read article
-
Mechanical Properties and Temperature distributionofHard Facingof SS-304 steelby using SAW
Abstract: Surface engineering is a multidiscipline activity aimed at tailoring the properties or surfaces of engineering materials to improve their function or service life. Mostly; as applied to metals, surface engineering includes processes; such as plating, diffusion treatment, physical and chemical vapor deposition, ion implantation, thermal spray coatings, selective hardening, hard facing, and a variety of less-used and proprietary processes. However; these processes will be described briefly and it will be …
Published in Journal of Automobile Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 18–29 Read article
-
Effect on Temperature and Efficiency on Photovoltaic Module of PV/T System with Water Based Optical Filter
Abstract: Solar radiation has ultraviolet, visible and infrared radiations, in which infrared and ultra-violet part of the solar radiation are mainly responsible for the heating of solar cell. This decreases the efficiency of the solar cell by –0.3 to –0.5% K-1. When we increase the concentration on the solar cell then the heat becomes more prominent and causes the damage of the solar cell, and also decreases the efficiency of solar …
Published in Journal of Electronic Design Technology · Vol. 8, Issue 1, 2017 · pp. 1–6 Read article
-
Scanner and Display Installation on Petrol Engine Test Rig: Review
Abstract: In this project, we are going to develop a temperature scanner with display. It is a device that measures more than one temperature points or multi-channel. It is actually a multi-channel indicator that measures and displays signals of each channel one-by-one up to last channel and then returns to first channel and continues the process cyclically. This continuous cyclic process of measurement is called scanning. By using a temperature scanner, …
Published in Journal of Electronic Design Technology · Vol. 11, Issue 3, 2020 · pp. 28–33 Read article
-
IoT BASED SMART TEMPERATURE CONTROL SYSTEM
Abstract: Internet of Things (IoT) is a progressing technology with unimaginable growth, significance and ability. We present the role of Internet in the IoT network and some concepts of Internet of things, which technology is capable to read and sense real time temperature data with help of sensor through internet. We as well describe the concept of MQTT that connects electronics devices to the cloud and we can modify it or …
Published in Journal of Electronic Design Technology · Vol. 12, Issue 2, 2021 · pp. 26–30 Read article
-
Current Status of Thermal Spray Coatings for High Temperature Corrosion Resistance of Boiler Steel
Abstract: In the thermal power plants, the conventional steels used in boilers are unable to sustain the hot corrosion issues. To reduce the problem of hot corrosion in the boilers, many types of surface coatings have been used in the recent past. Thermal spray techniques have been used to develop these coatings on the components of boilers. Thermal spray coating techniques are important means to develop coatings to increase the corrosion …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 29–35 Read article
-
Study on High Strength Ti-Al-V Alloy at Cryogenic Temperature
Abstract: The α+β type high strength titanium alloy is usually used as a structural biomaterial for the manufacturing of orthopaedic prostheses as well as surgical and dental implants. The Ti-Al-V alloy had been deliberately solution treated at 860°C for 1 h (subsequently quenched in variable mediums) just below the β transus but within the α+β region to avoid grain coarsening for single β region as well as accomplish optimum balance properties …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 1, 2023 · pp. 1–14 Read article
-
Growth Mechanism Dependent Room Temperature Electrical Properties of Complex Spinel Oxide Nanostructures
Abstract: Here we present the investigation on growth mechanism and corresponding electrical properties of complex spinel zinc stannate (Zn2SnO4) nanostructures synthesized using VLS (vapour-liquid-solid) method in a vacuum operated thermal CVD setup. GAXRD, Raman and Room temperature resistivity, mobility and carrier concentration of variety of nanostructures of Zn2SnO4 have been analysed to understand the effect plausible growth mechanism dependent properties. The corresponding role of catalyst layer thickness during growth as well …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 3, 2020 · pp. 20–25 Read article