Search
163 articles for “Flexural Performance”
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
A Comprehensive Review of Geopolymer Concrete: Performance and Incorporation in RCC Beams
Abstract: This review paper provides a succinct overview of recent strides in geopolymer concrete technology, focusing on its strength, durability, and sustainable applications. Beginning with the fundamental principles of geopolymerization, the paper delves into the latest research findings, emphasizing enhancements in compressive and flexural strength. It critically analyzes the durability of geopolymer concrete against environmental factors and explores innovative strategies, such as incorporating supplementary cementitious materials and nanomaterials, to improve its …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 7–12 Read article
-
Innovations and Comparative Analyses in Foam Concrete: A Review of Emerging Techniques and Materials
Abstract: Foam concrete, recognized for its lightweight and eco-friendly properties, is gaining prominence as a sustainable construction material. However, challenges such as low mechanical strength, performance variability, and limited environmental resistance have prompted significant innovations in recent years. This study synthesizes findings from three key studies focused on enhancing foam concrete’s performance through nanomaterials, natural fibers, and alternative lightweight aggregates. The incorporation of nano-silica and nano-calcium carbonate into coal gangue foam …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 3, 2025 Read article
-
Development and Evaluation of Sodium Hydroxide-Treated Jujube Pit Reinforced Epoxy Composites
Abstract: The automotive sector has experienced a tremendous transformation, propelled by the increasing demand for materials that provide a balance between mechanical performance, economic efficiency, and environmental sustainability. In accordance with worldwide sustainability goals, the trend has moved toward the utilization of lightweight, recyclable, and biodegradable materials in modern vehicle architecture. Natural composite materials, which are derived from renewable resources such as seeds, leaves, and tree barks, have gained considerable attention …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 494–501 Read article
-
Impact of Chemical Conditioning on the Mechanical Performance of Pine Fibre-Reinforced Composites
Abstract: The study examines the effects of treatments like alkaline, silane, and acetylation on enhancing the mechanical strength and reducing water absorption in pine fiber-reinforced composites. Natural fibres, while eco-friendly and sustainable, present challenges in fibre-matrix adhesion due to their hydrophilic nature, impacting composite performance. Chemical treatments were employed to modify fibre surface characteristics, enhance interfacial bonding, and thereby improve mechanical properties. Silane-treated composites exhibited the highest tensile and flexural strengths, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 140–150 Read article
-
Failure Analysis of Hybrid Natural/Synthetic Fiber Composite Laminates in The Application of Hybrid Composite Pressure Vessel
Abstract: Composite laminates are frequently utilized in multiple sectors. The growing complexity of composites in aircraft applications necessitates hybridization of these materials. These hybrid laminates consist the combination of one natural fiber and two selected synthetic fibers. This work investigates three different six-layer hybrid composite laminate combinations: Jute2/Carbon2/Jute2, Jute2/Glass2/Jute2, and Carbon2/Glass2/Carbon2, with helix angles of 0° and 90° and a volume fraction of 50% fiber content. Each specimen is fabricated utilizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 85–98 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Mechanical and Environmental Performance of Curaua Fiber Composites: A Sustainable Alternative to Wood and PVC
Abstract: This study examines the mechanical behavior of curaua fiber composites, comparing their performance to other materials like wood and PVC. Curaua fibers, sourced from the Brazilian Amazon, demonstrate superior mechanical properties, making them a promising alternative for sustainable composite materials. The composites were fabricated using various methods and subjected to tensile, flexural, and impact tests. Results show that curaua fibers exhibit an average tensile strength of 30.7 MPa, outperforming wood …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 467–477 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Transforming Waste into Value: The Role of Discarded Waste in Sustainable Paver Block Production
Abstract: Concrete is the primary material used in building construction, but significant waste is generated during the demolition of structures. The increasing activities in the construction sector and manufacturing industries have led to a rise in waste production. This review paper explores the potential of utilizing Construction and Demolition (C&D) waste in the production of sustainable paver blocks, addressing the pressing environmental challenge of the estimated 12-14 million tonnes of construction …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 1–15 Read article
-
Improvement of mechanical properties for PMMA based Denture material
Abstract: Denture material properties can be improved by various fiber addition. The most often used denture materials are polymethyl methacrylate (PMMA) resins; nevertheless, they do not have a high flexural strength (FS). This investigation compared the mechanical characteristics of an injection-molded polyamide. Deflex, an additional injection-molded PMMA base material, SRIvocap, and a typical compression-molded PMMA (Meliodent). The flexural qualities (deflection, bending strength, and bending modulus) of 100 different denture base materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 155–165 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Dynamic Performance Enhancement of Polymer Composites through Metaheuristic machinining optimization
Abstract: This work aims to provide an optimization of meta-heuristic algorithms in order to improve the dynamic behavior of composite materials utilized in various practical engineering tasks. Based on the Comprehensive literature review it has been observed that composite sandwich panels with PVC foam cores accomplished mechanical characteristics superior than those ones that were produced on PU foam core mainly in flexural, compression, and impact tests Thus the study establishes the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 114–129 Read article
-
Performance and Robustness of Wind Turbine Blades Composed of Recovered Waste Carpet Fiber Polymer Composites
Abstract: Carpets stay in good condition for ten to fifteen years, after which they wear out and are discarded. The large amount of used carpet waste is often dumped in landfills, causing health risks, air pollution, and other environmental problems. To reduce the growth of landfill sites, it is essential to implement recycling measures for carpet waste, protecting the environment by reusing these materials in new products. Carpet are made from …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 53–66 Read article
-
Reviewing the Effect of Waste PET Strips as Fiber Reinforcement in Concrete
Abstract: Polyethylene Terephthalate also known as PET is the most commonly and widely used petroleum polymer plastic in the packaging industry. It is a well-established fact that the non-biodegradability of all plastics is a hazard to the environment. Thus, effective management of this waste is necessary. Numerous researchers have carried out studies and attempts to incorporate this plastic waste into concrete for performance enhancement. Considering the possible utilization of this waste …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 166–177 Read article
-
Dynamic Analysis of Honeycomb Sandwich Laminated Composite Plate using ANSYS
Abstract: A structural sandwich is a peculiar form of a laminated composite comprising of a combination of distinct materials which are bonded together to use effectively the properties of each separate component to the structural advantage of the whole assembly. Two thin, rigid and quite strong faces in the framework are partitioned by a thick, light and weaker core. The faces are attached adhesively to the core to ensure effective load …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 2, 2026 Read article
-
Engineering Sustainable Interior Materials: Performance Analysis of PLA Composites Reinforced with Banana Stem Fiber and Spent Coffee Grounds
Abstract: This study presents the development and classification of eco-friendly composite panels reinforced with spent coffee grounds (SCG) and banana stem fibers (BSF) for interior applications. Hybrid composites were fabricated using polylactic acid (PLA) as the matrix with a constant filler loading of 30 wt%, varying BSF:SCG ratios (70:30, 60:40, 50:50). Mechanical testing revealed that the 70:30 composite exhibited the highest tensile strength (42 MPa) and flexural strength (58 MPa), whereas …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 94–105 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Prediction of Mechanical Properties for Advanced Engineering Applications utilizing Polymer Composite Materials by Machine Learning
Abstract: Polymer composites show great promise as engineering materials because of their mechanical performance, resistance to corrosion, lightweight nature, and adaptability in design. Aerospace, automotive, biomedical, maritime, and civil engineers all rely on mechanical property prediction to cut down on trial expenses, expedite product development, and optimize material selection. Speedy design optimization is not possible using traditional numerical and experimental methods due to the high costs associated with material characterisation, computational …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article