Search
215 articles for “Finite Elements Design”
-
Optimal Design and Fabrication of drone for agricultural Purpose
Abstract: Due to their reliable technology and simple operation, drones have found widespread use in many fields. This study aims to plan, investigate, and build a quadcopter for use in farming. This drone is implanted for pesticide spray in the farms. An innovative quadcopter design that is easily removable and transportable is used in this study. The entire structure is developed in Iron CAD, and the viability of the new design …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 81–92 Read article
-
A Shear Strength Reduction Method for an Open Pit Slope Stability Analysis Based on Finite Element Method
Abstract: Slope stability assessment of open pit mines is critically important, since it forms part of the overall productivity and safety management strategy of the mines. The aim of this work is to investigate the overall stability conditions of three (3) open pits in Gold Fields Limited, Tarkwa Ghana. Field and laboratory investigations were conducted as well as empirical methods. Finite Element Analysis (FEA) in Rocscience was carried out using the …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 1–24 Read article
-
Managing Blow-by in Modern Engines: A Comprehensive Review of Crankcase Ventilation Technologies
Abstract: Blow-by in internal combustion (IC) engines occurs when high-pressure combustion gases escape past the piston rings into the crankcase. These gases typically carry oil aerosols, unburned hydrocarbons, and fine particulate matter, which, if not effectively managed, can disrupt lubrication, accelerate component wear, and contribute to harmful emissions. Effective crankcase ventilation is therefore essential not only for ensuring engine durability but also for meeting increasingly stringent emission regulations. This paper examines …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 317–324 Read article
-
Design and Analysis of Dispersion Flattened Low Loss Photonic Crystal Fiber
Abstract: AbstractThis paper demonstrates the study of triangular lattice hexagonal photonic crystal fiber with GeO2 doped core. The photonic crystal fiber (PCF) studied in this research work has a core doped with 97% molar concentrated GeO2 with seven layers of air-capillaries around the core. The design and analysis of optical characteristics, i.e., dispersion, confinement loss, and effective area have been studied extensively for optimizing the structure for a certain range of …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 41–50 Read article
-
Comparative Study on Design and Analysis of an Iron-Box Using Different Materials
Abstract: In this study, a steady-state thermal analysis of the soleplate is conducted using four different materials (Aluminium, Stainless Steel, Titanium, and Ceramics) using ANSYS Workbench. Also, it ensures that the design adheres to safety standards and promotes efficient energy usage while examining heat distribution. In electric iron, the soleplate is the crucial part, so an analysis is done on this part. Also, a change in design was made to increase …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 192–201 Read article
-
Modelling and finite element analysis of thermo acoustic refrigerator
Abstract: In this work, the standard modified thermo-acoustic refrigerator (TAR) is created. It has a stack, heat exchanger, thermocouple, resonator tube, and an acoustic driver (loudspeaker). The effects of a few design factors were investigated for a thermo-acoustic refrigerator system, including wave patterns, frequency, and heat exchanger. It was discovered that a sine wave pattern produced better cooling results than the other wave patterns examined. The heat exchanger's addition greatly increases …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 9, Issue 3, 2022 · pp. 31–46 Read article
-
Design and Analysis of a Low Loss Polarization Maintaining Waveguide for Transmission of THz Waves
Abstract: AbstractThis paper presents the design of a novel porous core kagome lattice photonic crystal fiber (PCF) which acts as a low loss and polarization maintaining teraheartz (THz) waveguide. Using finite element method (FEM), properties of the proposed PCF are simulated in details including the effective material loss (EML), confinement loss, single mode propagation. Cyclic olefin copolymer, also known as TOPAS material have been chosen for the air micro structured inhibited …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 3, 2016 · pp. 13–22 Read article
-
Design, Modeling and Simulation of a 2-DOF Microgripper using Piezoelectric Actuator
Abstract: Aiming at the micro-assembly and micromanipulation of micro structures, a monolithic compliant-flexure based microgripper is introduced. This paper presents the design, modeling and simulation of a 2 DOF monolithic microgripper. In the proposed microgripper 2 piezoelectric stack actuators are used to obtain the tip displacement and the gripping force. The relationship between the gripping force, tip displacement in horizontal and vertical direction, input force and input displacement of the piezoelectric …
Published in Recent Trends in Electronics Communication Systems · Vol. 2, Issue 1, 2015 · pp. 10–18 Read article
-
Machine Learning-Assisted Design and Optimization of Lightweight Polymer Composites for IoT-Enabled Automotive Applications
Abstract: This study aims to develop an integrated machine learning and optimization framework for the intelligent design of lightweight polymer composites suited for IoT-enabled automotive applications. The goal is to enhance material performance while satisfying multiple design constraints such as mechanical strength, thermal stability, and process compatibility. A curated dataset of polymer composite formulations was used to train a Random Forest Regression (RFR) model capable of predicting tensile strength, thermal conductivity, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 12–27 Read article
-
A Comprehensive Study on Improving Contact Lens Performance Through Various Approaches
Abstract: Contact lenses improve vision quality by correcting refractive errors and thus provide a convenient alternative to traditional eyeglasses. Apart from vision enhancement, they have multiple applications in cosmetics, drug delivery, and therapeutic use. The performance of these lenses depends on various factors such as material, design, fitting, and interaction between the lens and the eye. The selection of appropriate materials is crucial for maintaining optimal eye health. Properties like oxygen …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 211–222 Read article
-
Study on the Failures of Raw Water Tower Structural Joints When the Air Gap of the Jack up Rigs is Increased
Abstract: 1. ABS Rules for Building and Classing Offshore Installations.2. Guidelines for Site Specific Assessment of Mobile Jack-up Units. SNAME T&R 5-5A.3. ABS. RP-2A, WSD, Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms- Working Stress Design. 21st Edn. Dec 2000; Suppl 1–3.4. Ohta T, Yamauchi H, Toriumi M. Design Method of Leg Structure of Jack-up Rigs. NKK Corporation, Engineering Research Centre, Kawasaki, Japan. 1st International Offshore and Polar Engineering …
Published in Journal of Offshore Structure and Technology · Vol. 6, Issue 1, 2019 · pp. 39–48 Read article
-
Generative Design of Bioactive Orthopedic Composites for Fracture Repair Using an Integrated Conditional GAN–Transformer Framework: A Multi-Objective Approach
Abstract: Orthopedic composite implants for fracture repair must simultaneously satisfy conflicting mechanical and biological demands: high fracture toughness, sufficient compressive stiffness, and bioactive surface chemistry enabling osteoblast adhesion and mineralization. Existing design approaches rely on trial-and-error experimentation, yielding sub-optimal trade-offs between these objectives. This paper presents an integrated conditional Generative Adversarial Network–Transformer (cGAN-T) framework for fully computational, multi-objective generative design of hydroxyapatite (HA)-reinforced polymer composite microstructures targeting Orthopedic fracture repair. A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 21–35 Read article
-
An Integrated Simulation Framework for Predicting Dielectric Breakdown and Electrical Aging in Epoxy-Silica Composite Insulation Systems
Abstract: This paper provides a combined computation approach in forecasting the dielectric breakdown and electrical aging within epoxy-silica composite of insulation system. The approach will consist of a three-complementary methodology (a combination of computing electric field using the finite element analysis, estimation of the probability of failures or breakdowns using Weibull statistics, and prediction of degradation tendencies using artificial neural networks). The epoxy-silica composites are of 10-40 volumes fillers. The simulations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 339–376 Read article
-
Free Vibration Analysis of Circular Perforated Laminated Plates
Abstract: This study investigates the free vibration characteristics of circular perforated laminated composite plates. A finite element model is created to analyze the effects of perforation patterns, hole sizes, and laminate configurations on the natural frequencies and mode shapes of these structures. The model incorporates shear deformation theory and accounts for the anisotropic nature of composite materials. Parametric studies were held to examine how varying perforation geometries, including hole diameter, spacing, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 281–296 Read article
-
Nano Positioning for Large Scanning Range for XY Mechanism
Abstract: In this study, an XY flexure stage that provides a variety of motion options while reducing incorrect motions is designed and assessed. In the flexure design, the double parallelogram flexure modules are positioned methodically and symmetrically. The performance of the flexure stage is assessed using finite element analysis, and experimental testing is performed to validate the findings. The built-in prototype of the flexure stage has dimensions of 350 mm x …
Published in Journal of Microelectronics and Solid State Devices · Vol. 12, Issue 1, 2025 · pp. 30–35 Read article
-
Structure–Property-Guided Polymer–Metal Hybrid Design of a Wall Plastering Spray Assembly
Abstract: Wall plastering spray equipment requires a combination of low mass, dimensional stability, abrasion resistance, chemical compatibility with cementitious mortar, and comfortable operator interaction. The original assembly was primarily developed as a metallic mechanical system; however, a polymer-focused material architecture can reduce non-load-bearing mass while retaining a safe metallic pressure path. This study, therefore, presents a structure–property-guided polymer–metal hybrid design in which the pressure housing and nozzle insert remain metallic, whereas …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 197–211 Read article
-
Design of C-Frame for Assembly of Mechanical Power Press
Abstract: The aim is to generate the model for assembly operation known as mechanical press machine. Using the concept of reverse engineering, the C-frame has been designed considering stress distribution, deflection, and design specification. Thus, a reciprocating piston is used which apply force upon component with the help of a special tool mounted on the piston. The optimum objective of this study is to observe the finite element modeling of ‘C’ …
Published in Trends in Machine design · Vol. 3, Issue 1, 2016 · pp. 24–29 Read article
-
Design and Analysis of Fluid Pressure in Microchannel for Healthcare Application
Abstract: The research article study explores an innovative approach for optimizing fluid pressure within microchannels using 2D integrated microcantilevers. These microcantilevers, strategically placed within the microchannel, serve as sensitive sensors to monitor fluid pressure variations. The computational simulations illustrate the effective approach to achieving improved pressure measurement for cell separation outcomes. The integrated microcantilever can determine the fluid pressure inside the microchannel, and also determine the pressure required for the cell …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 553–565 Read article
-
Finite Element, Experimental, and Machine Learning-Based Optimization of Machining Stability for Polymer Composite Material Processing
Abstract: The machining of polymer composite materials, particularly fibre-reinforced polymer-matrix composites, requires stable spindle-tool performance to avoid delamination, fibre pull-out, matrix cracking, thermal softening, poor surface integrity, and premature tool wear. In line with the scope of the Journal of Polymer & Composites, this study presents an integrated finite element, experimental, and machine learning framework for improving machining stability during end-milling of composite material systems. The spindle-tool assembly is modelled using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Optimization and Structural Integrity of Truck Chassis Using Finite Element Analysis
Abstract: The chassis of a truck is a crucial component, and it acts as a framework for the body and other components of the truck. It must also be strong enough to withstand pressures like shock, twisting, vibration, and more. When building a chassis, having enough bending stiffness for better handling characteristics is just as important as strength. Deflection, maximum stress, and maximum equilateral stress are crucial design factors for the …
Published in International Journal of Advanced Control and System Engineering · Vol. 3, Issue 1, 2025 · pp. 31–37 Read article