Search
228 articles for “ALU”
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Performance and Structural Analysis of Different Lithium-Ion Battery Chemistries for Electric Vehicle Applications
Abstract: Lithium-ion batteries (LIBs) stand at the forefront of electric vehicle (EV) technology and have become a driving force behind the development of advanced energy storage systems. In this study, performance and structural analysis of different lithium-ion battery (LIB) chemistries—namely Lithium Nickel Manganese Cobalt Oxide (NMC), Lithium Iron Phosphate (LFP), Lithium Cobalt Oxide (LCO) and Lithium Nickel Cobalt Aluminum Oxide (NCA)—is presented. The study explores important performance parameters like energy density, …
Published in International Journal of Advanced Robotics and Automation Technology · Vol. 3, Issue 2, 2025 · pp. 13–31 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article
-
A Review on Evolution of Aircraft Fuselage Materials: From Wood to Composites & Functionally Graded Materials
Abstract: This article presents a comprehensive overview of the evolution of materials for construction of aircraft fuselages, with a focus on the expanding use of polymer composites and functionally graded materials (FGMs) in modern aerostructures. The baseline fuselage design is thought to be from wood, to be followed by metallic systems such as aluminum, titanium, and nickel alloys. All systems improved manufacturability, strength, and longevity, but there was a substantial revolution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 447–455 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Design and Implementation of a 4-Bit Breadboard CPU Using Digital Integrated Circuits
Abstract: This paper presents the design and hardware realization of a simple 4-bit CPU built using discrete TTL integrated circuits on a breadboard. The CPU employs a 4-bit common data bus with tri-state buffers for device arbitration, three 4-bit registers (Register A, Register B, and an Output Register) implemented with 74LS175 quad D flip-flops, and a 4-bit ALU for addition/subtraction using a 74LS83 adder and XOR gates. Manual control signals (load, …
Published in Journal of Electronic Design Technology · Vol. 17, Issue 2, 2026 Read article
-
Relative Study on Design and Analysis of Iron Box using Different Materials
Abstract: In this study, a steady-state thermal analysis of the soleplate is conducted using four different materials(Aluminium, Stainless Steel, Titanium and Ceramics) using ANSYS Workbench. Also, it ensures that the design adheres to safety standards and promotes efficient energy usage while examining heat distribution. In electric irons, the soleplate is the crucial part, so an analysis is done on this part. Also, a change in design was made to increase safety. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Advanced Quantitative Analysis of Dynamic Recovery during Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls, and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering Read article
-
A Comprehensive Review on Red mud as Construction Material and its Utilization for Environmental Advantage
Abstract: These materials can help to further decrease pollution and disposal difficulties when utilized effectively in civil engineering applications. Red mud, a byproduct of converting bauxite into aluminum, collects and occupies an increasing amount of deforested area because of its high alkalinity. With little chance of being used, an estimated redmud of 116 tons are created year globally, posing a major risk of contamination and pollution. However, because they will be …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 35–40 Read article
-
Extraction of Natural Dye from Red Rose Flowers
Abstract: In this research work, locally available red flowers of the red rose are selected for the extraction of anthocyanin. Ethanol solvent was used to extract anthocyanin from flowers. Different methods are used to obtain natural dyes from flowers. FTIR, pH, and UV tests were performed to characterize the extracted anthocyanin. The pH differential method was used to measure the total anthocyanin content in red rose flowers. The color of the …
Published in Research & Reviews : Journal of Herbal Science · Vol. 14, Issue 3, 2025 · pp. 14–23 Read article
-
Design of a Geopolymer Based on Fly Ash and Metakaolin with a Solid, Liquid, and Powdered Alkaline Activator at High Temperatures
Abstract: In this work, the fresh and hardened properties of geopolymer concrete activated using solid, liquid, and powder alkaline activator systems, including fly ash and different amounts of metakaolin, are examined. Compressive and flexural strengths were assessed at 7 and 28 days in accordance with IS 516 (1959). Workability was evaluated using a slump test in accordance with IS 1199 (Part 2): 2018. At an ideal replacement level of 30%, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 712–726 Read article
-
Computational Analysis of Leaf Spring System with Functionally Graded Materials Using ANSYS
Abstract: Leaf springs are important parts of a vehicle’s suspension system, and their main function is to absorb shocks, improve stability, and make the ride more comfortable. Traditionally, ASTM A36 steel is used because it is strong, long-lasting, affordable, and easy to get. However, this type of steel is very dense, which makes vehicles heavier. This extra weight makes the vehicle less efficient and increases emissions. Because of these issues, there …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 380–397 Read article
-
Design and Thermal Analysis of Y2O3ZrO2 Ceramic Coated IC Engine Piston Based on FEA
Abstract: This paper includes the design and thermal analysis of an uncoated & coated IC engine piston made of aluminium-silicon alloy. Thermal analysis is performed on pistons cylinder comprised of aluminium alloys covered with artistic material (Y2O3ZrO2). The bonding is done by unique material (Ni-Cr-Al). Designing is done by appropriate machine design approach and the piston dimensions are determined by finite element analysis (FEA). FEA was performed using ANSYS. The coating …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation Read article
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
Comparative Energy and Exergy Performance of Box-Type Solar Cookers Using Various Pot Materials
Abstract: This research presents a laboratory study of a box-type solar cooker for two types of pot materials. Under the climate conditions of Jaipur, experiments were carried out on a standard box-type solar cooker using steel and aluminum vessels, either with or without a load. It is estimated what the merit figure (F1 and F2) is. The obtained F1 values show that the cooker, when used with steel and aluminum containers, …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 2, Issue 1, 2024 · pp. 9–15 Read article
-
A Study on Friction Stir Processing Effected on Hardness and Tensile Properties When Single Pass and Double Pass Is Considered Using Al 6061 And Steel Material
Abstract: The principle of friction stir welding was initially employed to build the emerging technology known as friction stir processing, or FSP. FSP has shown to be a successful method of developing face mixes and increasing the material's mechanical parcels. Aluminum blends are among those accoutrements over which the FSP can be performed successfully. The study comprised the careful processing of steel and Al 6061 samples using both single and double …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 16–23 Read article
-
Significance of Composite Materials for Making Better Future Society
Abstract: Since in the beginning of human history, Materials had been started in use. We can't imagine our world without materials. In fact, Materials has taken centre position in many developed and developing countries. The materials that humans have chosen to use for engineering projects throughout history, including the Stone, Iron, and Silicon ages. However, in order to meet today's difficulties, new materials must be discovered and developed with the necessary …
Published in International Journal of Advance in Molecular Engineering · Vol. 1, Issue 2, 2023 · pp. 56–62 Read article
-
Affect of Finite Element Modelling on Static Behavior of Underwater Shell
Abstract: The objective of the present study is to compare and contrast different numerical models based on their mesh quality and material properties in predicting the response of an underwater shell under an external pressure of 1 MPa. Two different mesh qualities with the same element size are developed for solid geometries without and with slicing the solids at geometric discontinuities to enhance the element quality. From the static response of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 154–163 Read article