Search
1260 articles for “CTLA-4”
Nothing matched all of your words, so these match any of them.
-
Experimental Investigation of Boron Carbide Reinforced Al-Mg-Si Alloy Nano Composites by the Stir Casting Method Using Machine Learning Algorithm
Abstract: For the purpose of this experiment, Al-Mg-Si alloys were manufactured with the use of the stir casting process with a metal mold. The alloys had different weight percentages of nano boron carbide, which ranged from 0 to 4% by weight. The intervals between the percentages were 0.5. Following that, the microstructural and mechanical parameters of the as-cast alloy and the nano composites were compared and contrasted according to ASTM Standards …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1766–1779 Read article
-
Intelligent Optimization of Drilling Parameters in Polymer Composites using Machine Learning and Metaheuristic Techniques
Abstract: The study tests different ways to use ML and metaheuristic algorithms to determine the best drilling parameters for polymer matrix composites. The research uses a composite matrix made from 55.25% vinyl ester, 44.0% Nickel–Phosphorous coated glass fiber and 0.75% Al₂O₃ nanowires which are tested for tensile strength (64.57 MPa), flexural strength (85.86 MPa) and impact strength (71.79 kJ/m²). By applying a Taguchi orthogonal array, it is observed that a slower …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1795–1810 Read article
-
Performance Enhancement of COC-Modified LLDPE Films: Optimization of Stiffness, Tear Resistance, and Barrier through Plasma Surface Modification
Abstract: This study explores the development of high-performance packaging materials by blending commodity Linear Low-Density Polyethylene (LLDPE) with engineering cyclic olefin copolymer (COC) as a performance modifier. To leverage the processability of LLDPE alongside the structural rigidity of COC, blends were prepared at various weight ratios (95/05, 90/10, 85/15, and 80/20) using twin-screw melt extrusion, followed by the production of films and sheets via blown film extrusion and compression molding. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 128–143 Read article
-
The Effect of Spatial Distribution of Public Amenities on Residential Property Rental Value
Abstract: In major cities around the world, the rental value has indeed been increasing at an unprecedented rate because of the rising demand for residential properties in urban areas. Residential building characteristics, neighborhood characteristics, accessibility factors, and amenities are all factors that influence residential rental value. These amenities lead to rent differentials. The links that exist between residential property rental values and various physical and locational dwelling features, amenities, and so …
Published in International Journal of Land · Vol. 3, Issue 1, 2026 · pp. 28–37 Read article
-
Assessing Land use Dynamics and Policies in the Waghur Basin Using Geospatial Techniques
Abstract: Changes in land use and land cover (LULC) are key indicators of human–environment interactions, especially in river basins where anthropogenic pressure is increasing. This study evaluated land use change and policy implications in the Waghur Basin, India, through a geospatial analysis of 35 years (1990–2025). Remote sensing and GIS-based supervised classification with the help of machine learning methods were applied to multi-temporal Land satellite images to create LULC maps and …
Published in International Journal of Land · Vol. 3, Issue 1, 2026 · pp. 38–49 Read article
-
Performance Testing of Arduino-Based Hybrid Solar Dryer for Drying Apple Slices
Abstract: A novel and high-efficiency hybrid solar dryer was designed and developed in this study to dry apple slices. The thermal analysis of the dryer is conducted by calculating collector efficiency, drying rate, and drying efficiency. Integrating an Arduino-based temperature and humidity monitoring system in a hybrid solar dryer enhances the ability to optimize performance and efficiency. Both the collector and drying chamber are made of aluminum sheet as it has …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1872–1886 Read article
-
Improving Black Cotton Soil with Sodium Hydroxide and Fly Ash: An Assessment of Optimum Moisture Content, Dry Density, and California Bearing Ratio
Abstract: This study investigates the stabilization of Black Cotton Soil (BCS), an expansive clayey soil primarily composed of montmorillonite minerals, using sodium hydroxide (NaOH) and fly ash. Due to its high plasticity and significant volume changes with moisture, BCS is challenging for construction purposes. Adding NaOH and fly ash can potentially improve the soil's moisture tolerance, compressibility, and reduce its plasticity, making it more suitable for structural applications. The research evaluates …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 192–201 Read article
-
Systolic-Predominant Hypertension and the Aging Heart: A Cross-Sectional Study on LVH and Cardiovascular Riskss
Abstract: Background: Systolic-predominant hypertension, defined as a systolic blood pressure ≥140 mm Hg with diastolic pressure <90 mm Hg, is the most prevalent form of hypertension in the elderly. It arises primarily due to age-related arterial stiffening and baroreceptor dysfunction. Once considered a benign outcome of aging, systolic-predominant hypertension is now recognized as a major risk factor for cardiovascular morbidity and mortality. Aim and Objective: To evaluate the cardiac status and …
Published in Research and Reviews: A Journal of Medicine · Vol. 16, Issue 1, 2026 · pp. 13–24 Read article
-
Polymer Composite Nodes for Smart IoT Environmental Monitoring: Applying ML-Calibrated RF Sensors for Exceptionally Low-Power, Flexible, and Dependable Performance
Abstract: The quick usage of the Internet of Things (IoT) for monitoring the environment needs sensor platforms that are accurate, responsive, adaptable, energy-efficient, and able to work in many different conditions. This work presents polymer composite nodes equipped with machine learning (ML)-calibrated radio-frequency (RF) sensors that adhere to stringent criteria. Sensor substrates built of flexible polymer matrices with conductive fillers are strong, light, and flexible enough to fit on surfaces that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1205–1221 Read article
-
Development and Performance Evaluation of GO–ZnO/PU Hybrid Nanocomposite Coatings for Improved Optical Transmission, Cooling, and Self-Cleaning in PV Systems
Abstract: The performance of solar photovoltaic (PV) modules with time is affected by thermal heating, dust buildup, and exposure to ultraviolet (UV) light; as a result, the power loss increases rapidly during the use condition. In this study, a polyurethane (PU) nanocomposite, fabricated with graphene oxide and zinc oxide (GO–ZnO), is invented and examined. Improvements in heat management, light transmission, and dirt resistance are planned for PV glass surfaces. The nanocomposite …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 243–249 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Spatial Distribution and Species Diversity of Marine Bibalves Along the Rocky Intertidal Zone of Veraval, Gujarat, India.
Abstract: The rocky intertidal shoreline of Veraval, located along the Saurashtra coast of Gujarat, serves as a vital habitat for various marine organisms due to its unique composition of rocky- sandy patches and tidal pools. This study was undertaken to evaluate the diversity and spatial distribution of marine bivalves at the Jaaleshwar coast (20º 54’ 36.210’’ N, 70º 21’ 09.090’’ E). Field observations were carried out over nine months from July …
Published in International Journal of Marine Life · Vol. 3, Issue 1, 2026 · pp. 25–30 Read article
-
Comparative Analysis of Processing-Property Relationships in Metal and Polymer Matrix Composites: A Unified Statistical Framework for Hardness Characterization
Abstract: Composite materials, encompassing both metal matrix composites (MMCs) and polymer matrix composites (PMCs), exhibit complex processing-property relationships that fundamentally govern their mechanical performance across diverse applications. This study presents a unified statistical framework for analyzing hardness characteristics in composite systems, using aluminum-tungsten carbide (Al-WC) metal matrix composites as a representative model system while establishing connections to polymer matrix composite behavior. The investigation employed comprehensive processing parameter optimization, microstructural characterization, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 419–430 Read article
-
How do Polymer-derived Implants Influence Patient-Reported Outcomes (PRO) in Cardiovascular and Orthopaedic Procedures
Abstract: Implants derived from polymers have surfaced as adaptable substitutes for conventional metallic devices in cardiovascular and orthopedic treatments because of their adjustable mechanical characteristics, biocompatibility, radiolucency, and ability for surface alteration. This systematic review assesses the impact of polymer-based implants such as PEEK, UHMWPE, bioresorbable polymer scaffolds, and drug-eluting systems on outcomes reported by patients (PROs). Findings from 42 qualifying studies show overall positive impacts on pain alleviation, functional recovery, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1821–1834 Read article
-
Integrating Social Perception and Economic Valuation for Riparian Zone Preservation: Evidence from Kiliti Watershed, Ethiopia
Abstract: Riparian zones play a crucial role in maintaining watershed health by providing ecosystem services such as water filtration, erosion control, biodiversity conservation, and aesthetic and cultural benefits to surrounding communities. Despite their importance, riparian areas in many developing countries are increasingly degraded due to agricultural expansion, grazing pressure, and settlement encroachment. This study integrates social perception analysis with economic valuation to assess riparian zone preservation in the Kiliti Watershed, Northwestern …
Published in International Journal of Environmental Planning and Development Architecture · Vol. 4, Issue 1, 2026 · pp. 49–55 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
AI-Driven Prediction of Mechanical and Thermal Properties in Polymer-Based Functionally Graded Composites
Abstract: The proposed architecture of the current paper is an artificial intelligence (AI)-driven model of forecasting mechanical and thermal aspects of polymer-based functionally-graded composites (FGCs). Traditional micromechanical and finite element models, which are practical in homogeneous composites, might not be able to account in nonlinear interaction that is caused by compositional gradient. To overcome the challenge, machine learning (ML) models like artificial neural network (ANN), support vectors regression (SVR), and gradient-boosted …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 70–89 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Parametric Study of Laser Drilling Process Using Multi Variable Regression Analysis
Abstract: The laser drilling process is an advanced manufacturing technique extensively employed for intricate and high-value components in aerospace, automotive, and electronics industries. Laser drilling technology offers opportunities to meet the contemporary demands of industries using a broad spectrum of engineering materials. However, this process encounters several engineering challenges such as thermal damage, dimensional inaccuracies, and the formation of a recast layer in the drilled components. This study focuses on examining …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1000–1015 Read article