Search
1972 articles for “4-dioxopyrimidine-5-carbonitrile” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Wear Behavior of Al-Alloy (Al-5 Mg) in-situ Reinforced TiB2 Particulate
Abstract: A research has been carried out for replacing Al monolithic alloys by aluminium (Al) based metal matrix composites (MMCs) in many engineering applications where high wear resistance and stiffness are required. In this paper, the investigated dry sliding wear behavior of TiB2 particulate reinforced composite of Al-Alloy (Al-5 Mg) is discussed. The in-situ Al-Alloy (Al-5 Mg) 10wt% TiB2 composite material were prepared by molten flux reaction synthesis using electric melting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 32–37 Read article
-
Structure and Cube Texture Development Trend of Al4.5MgMn Alloy at Variable Annealing Conditions
Abstract: Hot-rolled Al4.5MgMn alloy was cold rolled to true strain levels 0.8, 1.6 and 2.3. Annealing at 300°C, 350°C and 400 °C was done to develop annealing structure. The annealed structures were measured by SEM-EBSD. The average grain size and grain size distributions were measured using Sigma-scan-Pro 5 structure analysis software. The average grain size and grain size distributions showed higher number frequency of lower annealing grain size with the increase …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 32–38 Read article
-
Corrosion Behavior of Ferritic Steel, Austenitic Steel and Low Carbon Steel Grades in Sugarcane Juice
Abstract: The objective of the present study is to evaluate the corrosion behavior of ferritic grade AISI 444 and to compare its performance with the austenitic grade AISI 304 and low carbon steel AISI 1010 in the corrosive medium of raw sugarcane juice. General corrosion and pitting corrosion behavior of AISI 444, AISI 304 and AISI 1010 steels in sugarcane juice was investigated using traditional weight loss method and cyclic polarization …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 43–56 Read article
-
Optical Properties of Barium Borate (BaB2O4)Compound for Current Optoelectronic Applications
Abstract: In this work,Barium borate was prepared by sol-gel synthesisdepending on different molar (0.1, 0.2, 0.3 0.4 and 0.5) molar. Barium borate is an inorganic compound, and it was useda borate of barium with a chemical formula BaB2O4 or Ba(BO2)2 It is available as hydrate or dehydrated form, as white powder or colorless crystals. The optical characteristics of the prepared samples have been investigated by UV/Vis spectrophotometer in the wavelength range …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 1, 2020 · pp. 49–58 Read article
-
Heavy Fermions to the Scheme from Semimetals
Abstract: This article is a study about heavy Fermions to scope strange and unknown features of scattering accounted to conduction electrons in the metal. Nucleons generated by heavy metal compounds are named heavy fermions. These generate from magnetic impurities that are present in the matter as unusual distribution in particulate forms. Parameter of quasi-crystal lattice instability of these compounds has significance in response to behave as non-Fermi liquids affected under magneto-transport. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 15–22 Read article
-
Optimizing the Ratio of Number of Tubes in PCNTFET to NCNTFET for Digital Circuits
Abstract: AbstractCarbon nanotube Field Effect Transistors (CNTFET) offer various benefits as compared to other FETs. Many circuits can be constructed using PCNTFETs (P-type CNTFET) and NCNTFETs (N-type CNTFET) similar to the PMOS and NMOS of the CMOS technology. The CNTFETs employ carbon nanotubes in the channel of the device to provide a path for the ballistic conduction of electrons. The different ratios of number of tubes in channel of the PCNTFET …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 1, 2018 · pp. 34–40 Read article
-
Synthesis and Characterization of Nickel doped Barium Niobate Ba (Ni0.5Nb0.5)O3 (BNN) Nanomaterial
Abstract: AbstractFerroelectric materials are of great interest for researchers worldwide, because of their unique physical properties and wide range of applications. The composite nanomaterial Ba(NiNb)0.5O3 (BNN) was synthesized by conventional solid state reaction method. The structural characterization was done by x-ray diffraction (XRD). The research was carried out to investigate structural properties of BNN nanomaterial as a function of sintering duration. BNN was sintered at 10000C and different samples were prepared …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 2, 2018 · pp. 29–33 Read article
-
Challenges In Sodium Cooled Fast Reactor Thermal Hydraulics
Abstract: Heat Transfer and Fluid flow phenomena (referred as Thermal Hydraulics) play a significant role in the safe and economical design of fast breeder reactors (FBR). The sodium cooled fast reactors have a very complex flow and temperature profile within the pool or the test vessel. The high temperature operating conditions (~540 deg.C) also impose stringent requirements on the thermal design of the components. The basic approach of thermal hydraulic design …
Published in Journal of Nuclear Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 33–47 Read article
-
Execution of a Large Engineering Project in an R&D Institution- Some Experiences
Abstract: Steam Generator Test Facility (SGTF) was set up mainly to validate the design of the steam generator of the Prototype Fast Breeder Reactor (PFBR). PFBR is a power reactor of 500 MWe after the successful Fast Breeder Test Reactor (FBTR). FBTR was built in collaboration with French Atomic Energy Commission (CEA). It was similar to the 40 MWt Rapsodie reactor but had SG modules of the Phenix reactor design in …
Published in Journal of Nuclear Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 27–35 Read article
-
To explore the effect of polyethylene glycol additive on mechanical and gas permeation properties of polyvinyl alcohol membranes
Abstract: Polyvinyl alcohol (PVA) membranes were prepared by solution casting and blended with Polyethylene glycol (PEG) in de-ionized water which led to the formation of porous and flexible membranes. Extensive experimentation were performed, in order to find out that at what composition of PEG pores will be generated in the PVA membranes. The PVA polymer is a hard and crystalline thermoplastic so high concentrations of PEG were used, i.e. 40 wt%, …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 27–33 Read article
-
Tensile and Impact Properties of Jute/Glass and Jute/Carbon Fiber Reinforced Polypropylene
Abstract: AbstractComposites have created a niche in the world market today as they provide a stiff, strong and lightweight material. Two types of composites polypropylene/jute/glass fiber and polypropylene/jute/carbon fibers were prepared by varying the percentages of jute, glass and carbon fibers, respectively. A proportion of 35:5, 30:10, 25:15 and 20:20 were maintained between jute and other reinforcing fiber (glass or carbon) in polypropylene matrix. Tensile and impact test specimens were prepared …
Published in Journal of Polymer & Composites · Vol. 4, Issue 3, 2016 · pp. 35–39 Read article
-
Peroxide Modification of Polyolefins and Long Chain Branching and Molecular Weight Distribution Comparative Studies Thereof using HTGPC
Abstract: AbstractThe modification of polypropylene by combined use of peroxides and multifunctional components (MFC) is widely carried in order to introduce the long chain branching in the polymer. The presence of long chain branching in the polymer structure have effect on the processability, the melt strength and hence, the end-use of polyolefin polymers. The high temperature gel permeation chromatography (HTGPC) is widely used technique in the estimation of molecular weight, molecular …
Published in Journal of Polymer & Composites · Vol. 4, Issue 1, 2016 · pp. 9–15 Read article
-
Design, Analysis and Fabrication of Composite Leaf Spring
Abstract: AbstractNowadays composite materials are one of the materials which are greatly attracting researchers. Reducing weight and increasing or maintaining the strength of materials is getting to be highly important research issue in this modern world. In this paper, design, fabrication and analysis of composite leaf spring have been presented. The objective is to design a composite leaf spring with reduced length and weight as compared to steel leaf spring. The …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 4–14 Read article
-
Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Abstract: AbstractParticulate-filled polymer composites are becoming quite attractive because of their low cost and wide applications. In this study, the effects of coconut shell (CS) and snail shell (SS) volume fractions (5–50 vol. %) on the thermal and mechanical properties of unsaturated polyester resin (UPR) composite are investigated. The results show that tensile strength, elongation at break, flexural strength, and hardness of the composite increase as filler concentration increases. However, impact …
Published in Journal of Polymer & Composites · Vol. 2, Issue 2, 2023 · pp. 44–56 Read article
-
Analysis of Oxidation Behavior on T-22 Boiler steel at 800°C
Abstract: The behavior of boiler steel T-22 in a rich air environment has been studied under the condition of isothermal at 800°C for 50 cycles in a cyclic manner. The kinetics of oxidation was established for boiler steel T-22under cyclic conditions for 50 cycles by weight change technique per unit area. Each cycle heating the sample at 1 hour followed by cooling 20 minutes at ambient temperature. Detonation gun spray techniques …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 18–25 Read article
-
Conductive Organic Polymer Based Inorganic-Organic Hybrid Composite: Synthesis and Characterization
Abstract: Inorganic organic (IO) hybrids where inserted conducting organic polymer (COP) imprints their polymeric nature onto the hybrid material are one of the most promising candidates for solving many technological problems of modern technocratic society. The Inorganic-organic hybrid material of para toluidine (organic) & mercuric chloride (inorganic) was synthesized by using “instant-heating and slow-cooling” technique. Some light orange coloured plate-like crystals were obtained. XRD pattern of the grown crystal were analysed …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 1–5 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Role of GO and rGO on the Structural Properties of PA6/PMMA Blend Nanocomposites
Abstract: To understand and assess the role of Graphene Oxide (GO) and reduced graphene oxide (rGO) in the PA6/PMMA blend, nanocomposites, the PA6/PMMA (50:50 wt%) blend-based nanocomposites were prepare by loading different wt% of GO and rGO (1wt% and 3wt%), through twin screw melt extrusion followed by injection moulding technique. Different compositions of the nanocomposites were prepared using melt mixed method at 2300C by applying a rotational torque 50 N. All …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 1–10 Read article
-
Studies on Development of a Super Adsorbent Polymer for the Removal of Nitrogenous Waste Products from Urine Samples and in Intestinal Fluid Simulator
Abstract: Introduction: Colonic dialysis (CD) has been proposed as an appropriate candidate for excretion of electrolytes, nitrogen waste products and excessive fluid using gastrointestinal (GI) tract. Methods: The GI environment simulated in terms of concentrations of nitrogenous waste products, electrolytes, temperature and pressure. In addition, 24-hour urine samples were obtained from 10 healthy adult volunteers. Adsorbing capacity of Super Adsorbent Polymer (SAP) evaluated in GI tract simulating system and urine samples. …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 1–7 Read article
-
Preparation and Characterization of Composites Based on Polylactide and Herbs with Anti-Bacterial Properties
Abstract: Poly (lactic acid) is a polymer with increased interest in manufacturing a containers for different kinds of food. But the food stored in those containers comes with certain amount of bacteria and/ or molds. This suggest that the food can have shorter shelf life. That why is needed a container in which the food can maintain for longer period. In this paper were studied the properties of composite materials based …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 10–19 Read article