Search
1934 articles for “4” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Effect of Hooked-end Steel Fibre Incorporation in the Performance of Slag Based Geopolymeric Concrete Mixes
Abstract: In this study the efforts have been undertaken to evaluate the performance of slag based geopolymer concrete (GC) when hooked-end steel fibres have been incorporated in different percentages i.e. 0%, 0.5%, 1.0%, 1.5% and 2.0% to the mix. The alkaline activator used in this study was the dissolution of solid sodium hydroxide flakes in liquid state sodium silicate solution, dissolved in water. The compressive strength, split-tensile strength, shear strength and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 2, 2020 · pp. 28–35 Read article
-
Exploring Building Information Modeling
Abstract: A process which generate and manage digital presentation of functional characteristics of places is known as building information modeling (BIM). BIM is helpful to exchanged, mined a building or additional built asset. Nowadays for preparing plan, design operate and maintain infrastructure such as water, electricity, gas, roads, bridges, ports and tunnels, etc. BIM is commonly use. In this paper, we are trying to execute the work of BIM for 3D …
Published in Journal of Construction Engineering, Technology & Management · Vol. 7, Issue 2, 2017 · pp. 1–6 Read article
-
Experimental Investigation on the Strength of Concrete with Partial Replacement of Cement using GGBS and Alccofine
Abstract: Cement is the most important ingredient of concrete. A large scale production of cement consumes large amount of energy and produce a large amount of carbon dioxide (CO2) gas which harmful to human as well as environmental and natural resources. So, to avoid the effect to use industrial waste productions as a supplementary cementitious material (SCM) in making concrete i.e. silica fumes, rice husk ash, fly ash, metakaolin, alccofine, ground …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 1, 2023 · pp. 35–43 Read article
-
Investigation of Heat Transfer in Concentric Annuli with Perforated Inserts
Abstract: The increasing necessity for saving energy and material imposed by the diminishing world resources and environmental concerns have prompted the development of more effective heat-transfer equipment with improved heat-transfer rates. The hydrodynamic boundary layer acts as main resistance for the transfer of heat from tube surface to fluid or vice-versa and many researchers are trying to improve the convective heat transfer rate with inserts in tubes to break the boundary …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 1, 2018 · pp. 56–68 Read article
-
Mathematical Modelling of Electromagnetic Induction Coil gun for Non-Lethal Self Defence Applications
Abstract: To take someone's life is often termed as the biggest slanders spiritually one can commit be it while protecting one's self from endangering acts. Non-lethal weapons provide us with an opportunity to come over this dilemma thereby providing a numbing effect to save from devastating consequences. The objective of this paper is to present a non-lethal portable induction coilgun that can potentially address security concerns. To serve the respect and …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 66–73 Read article
-
Experimental Investigations of Mass Flow Rate on Regression Rate of Hybrid Rocket
Abstract: A number of practical hybrid propulsion systems developed for booster and upper stage application,at different Centers across the globe. The regression rate of hybrid fuel plays an important role ondevelopment of viable hybrid propulsion system. In the present investigation an effort has been madeto study the regression rate behavior of PVC-DBP((C 2 H 3 Cl) n )-DBP(C 16 H 22 O 4 ) hybrid fuel burning inthe stream of gaseous …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 2, 2021 · pp. 31–51 Read article
-
Design and Development of a Multifunction FPGA-based Data Acquisition System using Nonlinear Duty-cycle Modulation Technique
Abstract: AbstractA new generation of DAQ based on duty-cycle modulation technique is presented. It describes the design and prototyping of a FPGA-based data acquisition and signal generation board using the duty-cycle modulation technique and with computer-based software interface. The system is built around the DE0-Nano development board that embeds an Altera cyclone IV FPGA in which a NIOS II processor running at 100 MHz has been instantiated. The conversion technique from …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 3, 2019 · pp. 8–26 Read article
-
A Novel High Gain Cavity Backed Micro Strip-Fed Circular Triangular Corner Fractal Antenna for UWB Applications
Abstract: In the current article, a novel micro strip-fed circular triangular corner fractal unidirectional antenna with high gain is proposed for ultra wideband (UWB) applications. This antenna consists of circular patch with triangular slot with three iterations. A prototype of antenna has been designed on FR4 substrate having dielectric constant 4.4 and thickness 1.6 mm. This reference antenna is then placed in a cavity made up of FR4 having thickness same …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 1, 2015 · pp. 19–24 Read article
-
Design of 6-Bit Two-step Flash ADC for High Speed and Low Power Applications
Abstract: In this paper, 6-bit two-step Flash ADC operated at the 2 GS/s is designed, with optimized performance for frequency domain applications. To get the best performance, the coarse convertor of 2-bit and the fine convertor of 4-bit are chosen. The comparator design is done with optimum power and area with two power supplies. Intermediate state accuracy increased by thermometer coded current steering DAC. The DNL and INL specifications are chosen …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 29–39 Read article
-
Performance Analysis of 1-Bit Full Adder using GDI and CMOS Logic
Abstract: The adder is one of the most essential part in math processor, multiplier, and in various scientific applications. Full adder plays important role in multiplier architecture. In this paper a 1-bit full adder using GDI and CMOS logic has been implemented and comparative analysis has been done. The less delay and low power consumption is achieved for this implementation. This paper presents comparison of number of transistors have been used …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 2, 2015 · pp. 18–22 Read article
-
Techno-Economic Analysis of Fixed and Single Axis Tracking Systems Using NPV and IRR Methods
Abstract: A low power, low cost, high utility value photovoltaic power generating system has been designed and developed with an intention of catering to the needs of the rural population located in far flung villages or hilly regions where electricity supply is either unavailable or is erratic. The proposed solar photovoltaic system has been subjected to rigorous performance evaluation using the four widely used performance metrics namely, Energy Gain, Panel Efficiency, …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 10, Issue 3, 2020 · pp. 34–45 Read article
-
Production of Biofuel (Biodiesel and Bioethanol):An economical and environmentally feasible way to the society
Abstract: In recent years, bio fuels growers have achieved significant enhancement in crop output and processing efficiencies and today the volume of bio fuels produced in a specific planted area is several times higher than it used to be as latest methodology and technical work to increase production of biofuel. In the sense of methodology, bio fuels are sub-divided into two large categories: substitute for diesel (biodiesel) and substitute for petroleum …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 2, 2021 · pp. 1–10 Read article
-
Control System for Heat Generation in a Hybrid PV/T System
Abstract: The study analyzes the performance of a PV/T unit with a PCM attached to the rear side of the PV panel in direct contact. The unit works removing heat from the panel and using this heat for external applications. The PCM has a heat exchanger inserted to transfer heat removed from the PV panel and stored in the PCM to a water flow that circulates through the heat exchanger. The …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 1, 2023 · pp. 1–16 Read article
-
Colour Removal from Effluents Using Micromaterials
Abstract: In this study, the ability of Micromaterials to adsorb color from an aqueous solution was investigated by using flocculants and activated carbon prepared from Rice Bran, an agricultural by-product, and batch mode adsorption experiments were conducted. The influence of various factors such as initial concentration (20, 40, 60, 80 mg/L), contact time, pH (4.0-9.0), and dosage on the adsorption capacity was investigated and optimal experimental conditions were ascertained. Adsorption data …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 2, Issue 1-3, 2012 · pp. 1–8 Read article
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Improvement of Soil Characteristics Using Waste (plastic, steel and wood)
Abstract: ABSTRACTSoil stabilization is the process of altering the engineering properties. Soil properties would be altered by adding waste like plastic from beverage bottles, steel dust and wood waste. In present scenario disposal of plastic waste has become a major issue because plastic materials can take many years (above 400 years) for its decomposition and may cause severe damage to environment and human health. The problem which was associated with plastic …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 3, 2017 · pp. 7–10 Read article
-
Strength Studies of Fly Ash Stabilized with Lime and Gypsum
Abstract: An experimental study was conducted to investigate the performance of a composite derived from stabilizing fly ash with lime and gypsum. The initial part of the study examines the effect of lime (4%, 8%, and 12% by mass of dry fly ash) on compaction (in terms of density/moisture relationship) and unconfined compressive strength (UCS) of fly ash. Further the effect of adding small amount of gypsum (1%) on strength was …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 3, 2015 · pp. 10–16 Read article
-
Bearing Capacity of Double Box Shaped Skirted Footings on Sand
Abstract: The double-box-shaped footing with and without skirt and sand-resting pressure settlement behavior was discussed in this paper. Different parameters are normalised skirt depth (0.25 to 1.5), relative sand density (30 to 60 percent) and sand footing interface state (partially rough and rough). Results of this study showed that a general and local shear failure was observed at a relative density of 50 percent and 60 percent, and 30 percent and …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 10–19 Read article
-
SAFETY CLIMATE AND SAFETY SYSTEMS FACTORS AND THEIR RELATIONSHIP WITH ORGANISATIONAL ATTRIBUTES AND DEMOGRAPHIC CHARACTERISTICS OF EMPLOYEES IN MAJOR ACCIDENT HAZARDOUS INDUSTRIES IN KARNATAKA STATE, INDIA
Abstract: The present work evaluates the existing critical safety climate and safety system components in the Major Hazardous Industries in Karnataka state, India and establishes the quantitative relationship between them with the organisational and demographic characteristics using a Questionnaire method (containing 81 questions of various safety climate parameters and 53 questions of various safety engineering system parameters among 1029 employees in 22 major hazardous industries in Karnataka). A research instrument using …
Published in Journal of Industrial Safety Engineering · Vol. 6, Issue 1, 2019 · pp. 20–35 Read article
-
Corrosion Behavior of Welded Austenitic Stainless Steel in Different Environments
Abstract: Corrosion behavior of welded austenitic stainless steel in 0.5 M hydrochloric acid and wet-steam corrosive media has been studied. The immersion time in the corrosive media was 30 days to simulate the effect on stainless steel structures/equipment in offshore and food processing applications. Annealing heat treatment was carried out on the samples. The gravimetric technique was used for the corrosion tests. Seawater sample has highest weight loss of 4.0 mg …
Published in Journal of Industrial Safety Engineering · Vol. 1, Issue 3, 2014 · pp. 18–30 Read article