Search
245 articles for “structural durability”
-
Performance Evaluation of High-Performance Fiber Reinforced Concrete Incorporating Fly Ash, Coir Husk Ash, and Hybrid Fibers
Abstract: High-Performance Fiber-Reinforced Concrete (HPFRC) is an advanced composite material designed to improve the mechanical properties and durability of conventional concrete. This study investigates the effects of fly ash (FA), coir pith ash (CPA), and various fiber reinforcements (polypropylene, coir, and kenaf) on the compressive strength of HPFRC. The research evaluates the influence of natural admixtures, single fiber additions, and hybrid fiber combinations to optimize mix proportions for enhanced structural performance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 10–15 Read article
-
Enhanced Durability and Performance of Reinforced Concrete Beams through CFRP Wrapping: An Experimental Investigation
Abstract: Globally, maintaining and repairing aging reinforced concrete structures poses a significant challenge for the construction industry. Numerous structures built before modern earthquake-resistant design codes lack adequate seismic resilience. Additionally, evolving service requirements often necessitate strengthening existing structures to handle increased loads. While past research explored the effectiveness of various Fiber Reinforced Polymer (FRP) wrappings under specific conditions, limited studies have comprehensively compared the performance of Carbon Fiber Reinforced Polymer (CFRP) …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 37–49 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Optimization of Structural Health Monitoring Using Artificial Neural Network and Comparison with Traditional Method: A Comprehensive Review
Abstract: Structural health monitoring (SHM) has a critical role in ensuring civil infrastructure safety, reliability, and durability through real-time, condition-based monitoring. Traditional SHM systems employ hundreds of sensors such as accelerometers, strain gauges, and displacement transducers for monitoring vast amounts of data for structural inspection, but do not effectively manage complicated nonlinear data. This research paper, “Optimization of Structural Health Monitoring Using Artificial Neural Network and Comparison with Traditional Methods,” investigates …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 1, 2026 · pp. 23–33 Read article
-
Commercialization of Smart Polymers in Advanced Composite Structures for Industrial Applications
Abstract: The commercialization of smart polymers in advanced composite structures represents a significant rise in material science, particularly for industrial applications. These smart polymers show unique properties such as self-healing, shape memory, & responsiveness to environmental disturbances, making them ideal for a wide range of applications. In this paper, the researcher explores the advancements in developing and applying smart polymers within composite structures, focusing on their potential. Revolutionize industries like atmosphere, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 70–81 Read article
-
Design of a Geopolymer Based on Fly Ash and Metakaolin with a Solid, Liquid, and Powdered Alkaline Activator at High Temperatures
Abstract: In this work, the fresh and hardened properties of geopolymer concrete activated using solid, liquid, and powder alkaline activator systems, including fly ash and different amounts of metakaolin, are examined. Compressive and flexural strengths were assessed at 7 and 28 days in accordance with IS 516 (1959). Workability was evaluated using a slump test in accordance with IS 1199 (Part 2): 2018. At an ideal replacement level of 30%, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 712–726 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
A Study of Composite Concrete Using Palm Oil Fuel Ash (POFA) as a Partial Replacement for Cement in Self Compacting Concrete
Abstract: Due to its flexibility at young ages and its capacity to be moulded into any necessary structural form and shape, concrete is the most commonly used construction material. For concrete to be workable and to have the necessary strength and durability, thorough compaction utilising vibration is typically necessary. Large numbers of voids are caused by inadequate concrete compaction affecting the structural strength and long-term toughness. Self-Compacting Concrete (SCC) offers a …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 76–86 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Recent Advancements and Layering Techniques in Nanoparticle-Reinforced Hybrid Composites: A Comprehensive Analysis
Abstract: This review examines the advancements in nanoparticle-reinforced fiber composites, focusing on natural fibers, synthetic fibers, hybrid composites, and fiber metal laminates (FMLs). Nanoparticles such as SiO₂, TiO₂, Al₂O₃, and graphene, introduced at 0.5–3% volume, have significantly enhanced mechanical, thermal, and wear properties. Comparative studies reveal that hybrid composites reinforced with 1–2% nanoparticles show a 20-30% increase in tensile strength and a 15-25% improvement in thermal stability compared to non-reinforced composites. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 83–89 Read article
-
Enhancing Worker Comfort in High-Heat Environments: A Triangular Bladeless Cooling Fan Approach
Abstract: Workers in high-heat industrial environments frequently encounter thermal stress, fatigue, and dehydration, which significantly impact both productivity and safety. Existing cooling solutions such as pedestal fans, ceiling fans, and central air-cooling systems often fall short due to limited airflow reach, safety concerns from exposed blades, high energy consumption, and poor suitability for dynamic workshop layouts. To address these challenges, this study presents a novel triangular bladeless fan designed specifically for …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 25–31 Read article
-
Self-Healing Structural Polymer Composites Incorporating Bio-Inspired Nanofillers
Abstract: Self-healing polymer composites become an attractive family of intelligent materials that are capable of autonomously repairing damage, which will enhance their durability, reliability and service life in extreme engineering applications. The materials are based on the principles of nature, using the nanofillers that are derived from biological systems to improve mechanical properties and self-healing capabilities by utilizing hierarchical structures and multifunctional interface interactions. The recent developments on the formulation of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Evaluating The Durability and Environmental Sustainability of Hybrid Natural - Synthetic Fiber Composites
Abstract: This study examines the characteristics of hybrid composites composed of natural fibers (such as jute, hemp, or kenaf) and synthetic fibers (such as glass or carbon) integrated within polymer matrices. The hybridization method seeks to enhance the advantages of both fiber types, hence augmenting overall performance relative to single-reinforced composites. Mechanical properties like tensile strength, flexural strength, impact resistance and hardness were evaluated through experimental tests. The results demonstrate that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 93–102 Read article
-
Influence of SlS Parameters on Strength and Fatigue Durability of Polyamide-12
Abstract: Selective Laser Sintering (SLS), a laser-based polymer powder bed fusion process, has gained prominence in the fabrication of high-performance thermoplastics such as Polyamide-12 (PA12). This paper provides an extensive review of how key SLS process parameters—such as laser power, scan speed, hatch spacing, and energy density—affect the mechanical properties of PA12 components, with a specific focus on tensile strength and fatigue resistance. Studies demonstrate that increasing energy input enhances particle …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 178–191 Read article
-
Extending the Lifespan of Offshore Platforms: Vital Strategies for Durability
Abstract: This article explores the preventive measures for enhancing the durability and sustainability of aging offshore platforms, focusing on their evaluation, life extension, and potential repurposing. It begins by discussing diagnostic systems that assess structural integrity and safety, highlighting the importance of degradation models and neural networks in predicting corrosion effects on platform longevity. The paper then contrasts outdated Malaysian jacket platforms with emerging renewable energy solutions, particularly Ocean Thermal Energy …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 11–18 Read article
-
A Comprehensive Review of Geopolymer Concrete: Performance and Incorporation in RCC Beams
Abstract: This review paper provides a succinct overview of recent strides in geopolymer concrete technology, focusing on its strength, durability, and sustainable applications. Beginning with the fundamental principles of geopolymerization, the paper delves into the latest research findings, emphasizing enhancements in compressive and flexural strength. It critically analyzes the durability of geopolymer concrete against environmental factors and explores innovative strategies, such as incorporating supplementary cementitious materials and nanomaterials, to improve its …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 7–12 Read article
-
Comparative Thermal Stability of Structural Acrylic and Polyurethane Adhesives under High Heating Rate Conditions
Abstract: This study examines the thermal stability and degradation characteristics of structural acrylic and polyurethane adhesives through Differential Scanning Calorimetry (DSC) at an elevated heating rate of 15 °C/min. The purpose of this study is to assess the impact of rapid thermal excitation on the volatile loss of adhesives, their curing behaviour, and thermal decomposition profiles elements that are essential in high-speed manufacturing and thermally challenging settings. The findings indicated that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 717–725 Read article
-
A comprehensive study on elemental analysis and sustainable integration of CETP (common effluent treatment plant) sludge as a substitute to sand in concrete
Abstract: This study examines the utilization of sludge from common effluent treatment plants (CETP) as a fractional substitute for sand in M20 concrete mixtures. Its aim is to address disposal challenges associated with CETP sludge while promoting sustainable use of natural resources. The research assesses the structural and microstructural attributes of concrete mixes containing varying percentages of CETP sludge (0%, 10%, 20%, 30%, 40%, and 50%). Tests conducted include compressive, flexural, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 49–59 Read article
-
Determining the Optimal Thickness of Canal Lining for Enhanced Durability and Efficiency
Abstract: The thickness of canal lining plays a crucial role in preventing soil erosion caused by the thrust of water exerted in the canal due to standing water and the velocity of water flow. An optimally designed lining must be robust enough to withstand these forces while ensuring minimal seepage and maintaining the structural integrity of the canal. Various materials are used for canal lining, each with its own advantages and …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 2, 2024 · pp. 44–49 Read article
-
High Strength Concrete Using Stone Waste
Abstract: Concrete is still the main material used in modern construction, and high strength concrete (HSC) is especially important for structures that need to be very strong. With more focus on being environmentally friendly, using waste materials from industries like stone in concrete has become a good way to make construction more eco-friendly. However, getting rid of stone waste, such as granite slurry, marble powder, and quarry dust, causes environmental problems …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 8–15 Read article