Search
620 articles for “strength properties”
-
Experimental and Numerical Studies on Radial Tensile Strength of Composite Rotor
Abstract: This paper describes the experimental and numerical studies on the radial tensile strength (RTS) of composite rotor. Carbon/epoxy composite rotors were fabricated using a filament winding process and their radial tensile strength was determined by diametric tensile testing of composite C-rings. The radial tensile strength of the composite rotor was measured as ~ 22 MPa and the failure was found to occur circumferentially symmetric about the horizontal plane of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 985–996 Read article
-
Comparative analysis of carbon fibre and E-glass fibre characteristics
Abstract: In the contemporary automotive industry, the imperative focus on energy efficiency has driven the central role of lightweight, addressing challenges such as emissions reduction and fuel efficiency. Extensive research is underway to develop lightweight materials enhance recyclability, integration feasibility, and overall fuel efficiency These experiments were conducted in agreement with ASTM D638, ASTM D790-03, and ASTM D790 standards to ensure adherence to industry standards and facilitate meaningful comparisons. For the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 253–267 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Sustainable Epoxy Composites Enhanced by Cellulose Nanocrystals for Structural and Thermal Applications
Abstract: This study presents the advancement and behaviour analysis of sustainable nanocomposites reinforced with cellulose nanocrystals (CNCs), a biodegradable and high-aspect-ratio nanofiller derived from microcrystalline cellulose. CNCs were incorporated into a bisphenol-A-based epoxy matrix at varying concentrations (0, 1, 3, 5, and 7 wt%) to assess their influence on mechanical, thermal, and viscoelastic properties. The tensile strength of the composites increased significantly, from 45 MPa for neat epoxy to 65 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 126–134 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Finite Element Analysis of Spur Gear Manufactured of Al7475-SiC Composites
Abstract: The spur gear is used in power transmission systems in industrial and automotive sectors. But sometimes, these gears have problems with their teeth due to excessive stress and wear. Some gears don't work as well, so in the present work better material is used to make them work well. Composite materials, which is known for their optimal strength-to-weight ratio and weight reduction benefits. So, these materials are considered substitutes for …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 279–284 Read article
-
Critical Review on Basalt Fibre as Reinforcement in Different Applications
Abstract: Basalt fiber (BF), derived from volcanic rocks, has emerged as an attractive reinforcement material due to its remarkable properties, including high strength, stiffness, thermal stability, and eco-friendliness. This review critically examines the applications of BF as reinforcement in various fields, such as civil engineering, aerospace, automotive, and biomedical sectors. The performance of BF-reinforced composites in terms of mechanical, thermal, electrical, and biological properties is evaluated. The challenges and opportunities associated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 670–685 Read article
-
Enhancing Strength and Durability: A Study of Mortar Blocks with Steel Slag Incorporation and the Development of Steel Slag Lime and Cement Blocks
Abstract: This study is focused on investigating the strength and durability properties of mortar cubes made with slag cement and incorporating Ultra Fine Steel Slag (SS) as a potential replacement for natural fine aggregates (FNA). In some instances, the cement was entirely replaced with hydrated lime to develop the blocks. A battery of tests, including assessments of compressive strength, acid resistance, sulfate resistance, water absorption, and void analysis, were carried out …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 233–246 Read article
-
AI-Driven Optimization of Biopolymer Composite Formulations Using IoT Data Streams
Abstract: Biodegradable polymer composites have emerged as a sustainable alternative to petroleum-based materials in packaging, biomedical, and structural applications. However, traditional formulation techniques for reinforced polymer composites often lack precision and fail to adapt to real-time variations during processing, resulting in suboptimal material performance. This research proposes a real-time AI-IoT-enabled framework to optimize biopolymer composite formulations. The goal is to intelligently tune composite properties such as mechanical strength, moisture resistance, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 85–100 Read article
-
Experimental Investigation of Hybrid Natural Fiber Reinforced Epoxy Composites Using Banana and Sugar Palm Fibers
Abstract: This paper is a research study that examines the mechanical and morphological properties of hybrid natural fiber reinforced epoxy composites manufactured from banana fibers (BF) and sugar palm fibers (SPF). Because the use of sustainable, lightweight, and cost effective materials in engineering continues to grow, many engineers are looking at the possibility of utilizing natural fiber reinforced polymer composites as alternatives to traditional man-made fiber composites. Hybrid composite laminate samples …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 195–205 Read article
-
Mechanical Performance Degradation of Naturally Aged Nitrile Butadiene Rubber in Low Frequency Range...
Abstract: For good mechanical design, damping is often still an invisible requirement. Nitrile Butadiene Rubber (NBR) has a wide range of applications as a damping and sealing material. To offer the long-term service of NBR, it is important to estimate the degradation of modal properties under complex mechanical and environmental loading. The present work aims to correlate the experimental data with generalized higher-order Maxwell models and curve fitting techniques to find …
Published in Journal of Polymer & Composites Read article
-
Advances in Biopolymer Based Nanocomposite Materials for Food Packaging Applications
Abstract: This Article provides an in-depth exploration of the recent innovations in biopolymer-based food packaging, highlighting natural materials like starches and proteins, as well as synthetic biopolymers such as polylactic acid (PLA). With the escalating global concerns about environmental degradation and the detrimental effects of plastic waste, there has been a growing emphasis on finding eco-friendly, biodegradable substitutes to reduce plastic pollution and dependence on fossil fuels. Among the biopolymer alternatives, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 390–404 Read article
-
Biochar-Filled Soy Protein Composites: Evaluating Thermal and Mechanical Properties for Sustainable Polymer Applications
Abstract: The growing demand for environmentally sustainable and biodegradable materials has intensified interest in alternative solutions for thermal insulation. This study explores the development of composite materials using mango seed shell biochar (MSSB) and soy protein isolate (SPI) as a biodegradable matrix-filler system. Mango seed shells, an abundant agro-industrial waste, were subjected to pyrolysis at 500°C for 2 hours to produce biochar. The resulting MSSB was incorporated into SPI with glycerol …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 60–71 Read article
-
Determination of Compatibility of Polymer Systems and Study of Chemical Properties of their Mixtures
Abstract: We have obtained mechanical strength of materials as a result not by synthesizing new polymers, but by using industrial polymers. We have developed a technology for obtaining new composite materials based on industrial multi-tonnage polymers of high-strength polyethylene (HSPE), polyvinyl chloride (PVC), polyurethane thermoplastic elastomer (DUTEP), butyl rubber (BR), chlorocarboxylate polyethylene (CCPE), ethylene propylene rubber (EPR). To obtain a composition from these polymers, their mixture compatibility was first determined using …
Published in International Journal of Cheminformatics · Vol. 4, Issue 1, 2026 · pp. 17–29 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Evaluating The Durability and Environmental Sustainability of Hybrid Natural - Synthetic Fiber Composites
Abstract: This study examines the characteristics of hybrid composites composed of natural fibers (such as jute, hemp, or kenaf) and synthetic fibers (such as glass or carbon) integrated within polymer matrices. The hybridization method seeks to enhance the advantages of both fiber types, hence augmenting overall performance relative to single-reinforced composites. Mechanical properties like tensile strength, flexural strength, impact resistance and hardness were evaluated through experimental tests. The results demonstrate that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 93–102 Read article
-
Simulation and Experimental Analysis of Heat Treatment for Steel Tie Rods: A Review
Abstract: The study is related to the actual heat treatment and simulation of the physical deformation of the steel tie rod and compares the observations for process optimization. The general methodology is to go for either traditional or induction hardening after getting the chemical composition of the material, followed by tempering, which is a key technique for improving the mechanical properties of materials, strength, hardness, etc., and to release stresses. This …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 43–51 Read article
-
The Role of Polymers and Composites in the Development of a Dental X-ray Film Holder
Abstract: The advancement of dental devices has been significantly influenced by the development of polymer-based materials and composite structures. This paper explores the role of polymer chemistry in the design and manufacturing of a dental X-ray film holder, highlighting its impact on performance, safety, and sustainability. The use of biodegradable, durable, and patient-friendly polymer composites enhances the functionality and comfort of these dental tools, making them more cost-effective and efficient for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 323–331 Read article