Search
655 articles for “s-band”
-
LNA-BPF for Receiver Applications in ISM Band
Abstract: A new approach of design and performance analysis of low-noise amplifier with band-pass filter at 2.45 GHz is proposed in this paper. High gain of 15.99 dB and noise of 1.024 dB is achieved at a frequency of 2.45 GHz. A low noise amplifier is used in receiver applications to amplify possibly very weak signals. LNA and BPF are placed in the front end of the receiver circuit so that …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 7–12 Read article
-
A Neural Network Approach to Study the Bandwidth of C-Shaped Microstrip Antenna
Abstract: This paper presents the use of artificial neural network for the estimation of frequency band and bandwidth of a line feed C-Shaped Microstrip patch antenna. The results obtained by using ANNs are compared with IE3D simulation and found quite satisfactory. The designed antenna operates in the frequency range (1.735 to 1.945 GHz). The antenna is designed using glass epoxy between the ground plane and patch and simulated on the Zeland …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 24–30 Read article
-
Technology Limits on Differential Gain and Unity-gain Bandwidth of a Differential Amplifier: A Theoretical Analysis
Abstract: The limiting relationship between differential dc voltage gain and unity-gain bandwidth of an externally unloaded differential amplifier have been explored. It has been observed that the product of differential dc voltage gain and unity-gain bandwidth of a differential amplifier has an upper limit which is a technology constant. Keywords: Technology limits, differential amplifier
Published in Journal of VLSI Design Tools and Technology · Vol. 2, Issue 1-2-3, 2012 · pp. 118–124 Read article
-
Design and Analysis of Dual Band Equal Split N-way Wilkinson Power Divider
Abstract: Abstract A Design and analysis of dual band equal split N-way Wilkinson power divider is proposed in this specific work. For this the design of 2-way 4-way, 5-way and 6-way power divider is made with the help of an N-way power divider. An isolation resistor is used to achieve good isolation at output port of Wilkinson power divider. Parameters of the proposed configuration are calculated at the centre frequency of …
Published in Current Trends in Information Technology · Vol. 3, Issue 1, 2013 · pp. 17–20 Read article
-
Design of Triple Band Microstrip Yagi Uda Antenna
Abstract: Abstract A microstrip yagi uda antenna with triple band is proposed in this paper. The design antenna consists of CPW feeding in which the ground plane and the yagi antenna are on the same plane. The resonating frequency of design antenna is 6.29, 7.97 and 9.26 GHz. The antenna had achieved the directivity of 5.232, 5.704 and 6.062 dBi. The impedance of antenna is completely matched at all the three …
Published in Current Trends in Information Technology · Vol. 3, Issue 2, 2013 · pp. 7–10 Read article
-
Review and Analyze Low Cross Polarized Feed for Offset Parabolic Reflector Antenna for S-Band Application
Abstract: This study discusses the design of low cross polarized feed for offset parabolic reflector antenna and its application. Conical corrugated horn antenna consists of an input mode TE11 and the corrugation part requires a transition to HE11 mode for propagation. The paper presents the widely used design of TE11-HE11 mode converter i.e. Variable slot mode converter. Three different design of corrugated horn antenna is presented for optimizing the value of …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 3, 2018 · pp. 30–36 Read article
-
Dual Band Suspended Microstrip Right-angled Isosceles Triangular Patch Antenna
Abstract: ABSTRACT In this paper a dualband suspended microstrip right-angled isosceles triangular patch antenna is designed for use in microwave imaging system for breast cancer tumour detection. An approximate design equations are developed and validated by CST Microwave Studio’s simulated result. Here dual band operation is achieved by manipulating fundamental mode and higher mode of microstrip antenna. Tuning of this antenna is achieved at frequency 3.35 GHz and 6.70 GHz which …
Published in Journal of Communication Engineering & Systems · Vol. 2, Issue 2, 2012 · pp. 7–13 Read article
-
Health-related Issues among Brick Kiln Workers: A Cross-Sectional Study from Bijainagar and Bandanwara Area, Ajmer, Rajasthan
Abstract: Brick kiln industry is an unorganised and seasonal industry in India. Brick workers live in unhygienic conditions. Brick kiln industry is a place full of hazards. Brick workers are directly and indirectly affected with hazards. A cross-sectional study was carried out in Bijainagar and Bandanwara area. This paper examined the socioeconomic status of workers, their living conditions, types of work, duration of work, job satisfaction, welfare facilities, reason of working …
Published in Research and Reviews: A Journal of Health Professions · Vol. 9, Issue 2, 2019 · pp. 1–7 Read article
-
Koch Slot DRA Antenna Array for Enhanced X-Band Applications
Abstract: This work introduces an innovative method aimed at improving the gain of Dielectric Resonator Antenna (DRA) arrays functioning within the X-band spectrum. The design features a Koch-shaped slot-coupled feeding structure, utilising the properties of a short-ended microstrip line to enhance radiation directionality. The results of the simulation show that compared to conventional rectangular and V-shaped slot designs, the suggested antenna array provides a notable gain enhancement. This performance boost demonstrates …
Published in Recent Trends in Electronics Communication Systems · Vol. 12, Issue 2, 2025 · pp. 8–20 Read article
-
Microstrip Planar Broadband Yagi-Uda Antenna for X-Band Communication
Abstract: In this paper, a planar Yagi-Uda antenna based on classic Yagi-Uda dipole antenna is accessible which is very useful for microwave wireless applications. This antenna provides relatively high gain and more directive radiation pattern at X frequency band with proper impedance matching. This antenna has been developed at supporting dielectric constant of 4.4, supported substrate thickness of 1.6 mm and loss tangent of 0.02. The proposed antenna is completely compatible …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 60–63 Read article
-
Implementation of 2nd Order CMOS Gm-C IF Tuning Filter Operating at GSM and FM Band: Wireless System with Monte Carlo Analysis
Abstract: Designed folded cascode OTA has a 52 dB DC gain and provides a unit gain bandwidth of around 400 MHz. Design of CMOS Gm-C 2nd order biquad filter implementation using OTA, operating at center frequency 70 and 10.6 MHz. The filter can be operated at center frequency of 70 MHz under 1.8 V power supply and is suitable for intermediate frequency (IF) range in most of the wireless systems operating …
Published in Journal of Electronic Design Technology · Vol. 5, Issue 2, 2014 · pp. 9–24 Read article
-
Microstrip Patch Antenna for Dual Band Application
Abstract: AbstractThis paper presents a rectenna that is designed and simulated to power the wireless sensor systems at 3.12 GHz. The antenna substrate is designed with glass epoxy. The rectenna circuit has been simulated on the glass epoxy and RF-to-DC conversation is investigated for power level –5 dBm. The presented antenna has the impedance bandwidth of 58.34%, i.e. from 2.61 to 4.76 GHz with a gain of 2.67 dBi.Keywords: Rectenna, RF-to-DC, …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 25–28 Read article
-
Patch Antenna by using Tunable Metamaterial for Dual Band Application
Abstract: AbstractIn this paper, a novel compact microstrip antenna, designed on FR4 substrate, is proposed. Here, a compact Square patch antenna is designed in such a way that a layer of metal between the patch load and the radiating patch moreover, the ground which makes the antenna operate at a lower frequency and antenna at 2.418 GHz with the directivity and gain is 6.58 6dB and 2.935dB. The Tunable metamaterial is …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 3, 2018 · pp. 20–24 Read article
-
Design and Analysis of Dual Band Triangular Slotted Microstrip Patch Antenna for GPS and WLAN Application
Abstract: AbstractIn this paper, design of a dual operated microstrip patch antenna is presents. The dual-operation frequencies are chosen for UMTS/GPS and WLAN bands. A microstrip square patch antenna is designed which is excited by a microstrip line feed from the bottom of the antenna. An epoxy glass FR4 material is used as a substrate in the designing of antenna. The antenna is first modified in inverted U-shaped design to operate …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 1–5 Read article
-
Triangle Cut Circle Shape Bending Antenna for Wide Band Application
Abstract: In this article, an antenna has been simulated for the frequency range of 2.00 GHz to 13.00 GHz, i.e., wideband applications under simulation Software CST using bending material. This bending material is having very less dielectric constant of 1.7. For bending the antenna, Jeans material is used. The return loss of bending antenna is -26 dB at 3.837 GHz resonant frequency. Also, the loss tangent of the antenna is 0.025. …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 14–17 Read article
-
A Review on Quad Band Microstrip Antenna for GSM and GNSS Application
Abstract: Micropstrip or patch antennas are also known as a printed antenna fabricated on printed circuit board (PCB). Microstrip antennas are low cost, have a low profile, low weight and are easily fabricated [1]. They are used atmicrowave frequencies. In this review paper, a survey on quad band operations in patch antenna papers, which have been used by authors for designing of low profile, small compatible patch antenna, have been presented. …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Review Paper of Designing of CPW Fed Micro-strip Patch Antenna for UWB and Bluetooth Application
Abstract: A compact size coplanar waveguide (CPW)-fed micro strip antenna is proposed for radiation of the frequency spectrums 2.36 to 2.49 GHz (Bluetooth) and 3.1 to 10.6 GHz (UWB-Ultra wideband) covers. Both are unlicensed bands but in UWB band there are two licensed bands i.e. WLAN and Wi-MAX present in the frequency range of 5.12 to 5.825 GHz and 3.4 to 3.7 GHz respectively. In this design we have single CPW-fed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 35–40 Read article
-
Small Size High Gain Antenna and High Efficiency Rectifier for RF Energy Harvesting in 2.45 GHz ISM Band
Abstract: A streamlined microwave energy harvesting system to harvest energy in 2.45 GHz presented in this paper. An electromagnetically coupled square micro-strip antenna is designed and fabricated for formation in proposed system. Antenna gain of 6.7 db and bandwidth from 2.42to 2.47 GHz is achieved. The maximum gain of proposed antenna is 24 db at frequency 2.1 GHz. Rectifier circuit consists of a resonant circuit and a boosting circuit for enhancing …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 41–46 Read article
-
RF Energy Harvesting from Wi-Fi Router in 2.45 GHz ISM Band
Abstract: In this paper, an experimental RF energy harvesting system using rectifying antenna (rectenna) to harvest ambient energy from Wi-Fi at 2.45 GHz is presented. The proposed circuit is a combination of RMPA, followed by a third order stepped impedance low-pass filter, matching network and rectifier using Schottky diode for microwave (RF) to DC conversion. The performance of the rectenna is simulated by electromagnetic simulator computer simulation technology (CST) microwave studio. …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 21–25 Read article
-
Development of Bandwidth Enhanced Microstrip Patch Antenna for UMTS Application
Abstract: In this article, a low-profile microstrip patch antenna for UMTS application is presented. A wideband coaxial probe-fed slotted microstrip patch antenna has been simulated on IE3D software to give a wide bandwidth of 31.34% and tested successfully. The simulated and measured results in terms of return loss show good agreement.
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 1, 2015 · pp. 14–20 Read article