Search
121 articles for “particle size analysis”
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
A Study and Thermal Analysis of Automobile Radiator Using Nanofluids
Abstract: Over past few decades, number analysis has been carried out by the researchers and academicians in the radiator for it’s efficiency. It is purely depend on the application of fluid. Conventional fluids such a water, ethylene glycol and sodium are normally used as heat transfer fluids in radiator various techniques are applied to improve the heat transfer the used of additives is a technique applied to increase the heat transfer …
Published in Recent Trends in Fluid Mechanics · Vol. 3, Issue 1, 2016 · pp. 9–14 Read article
-
Mechanical Characterization of Green Composite Brake Pads Reinforced with Coconut Shell Waste
Abstract: In the present work, coconut shell powder proposed as a replacement material for the eco-friendly brake linings. The composites for brake pad were developed with other sizes of the coconut shell particles, namely (200 µm, 300 µm, 400 µm and 500 µm) The developed samples were evaluated for morphological, mechanical, physical and worability properties. The SEM micrograph proved that the coconut shell particulates are well dispersed in the composite everywhere …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1636–1648 Read article
-
Development of strontium ferrite/polyamide 12 and neodymium iron boron/polyamide 12 composites using additive manufacturing
Abstract: Polymer matrix composite materials with magnetic properties obtained by the addition of micron-size particles of neodymium iron boron (NdFeB) and strontium ferrite for fused filament fabrication (FFF) are becoming attractive because of their potential applications in the health and automotive industries. Additionally, the design flexibility and low cost of additive manufacturing processes encourage the scientific community to create the materials and understand the properties of the parts obtained with such …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 15, Issue 2, 2025 Read article
-
Characterization and Stability Analysis of Crude Oil-in-Water Emulsions
Abstract: AbstractProduced water in the form of oil-in-water emulsion is the largest waste stream generated during the oil and gas production. Characterizations of oil-in-water emulsion in terms of stability study with respect to oil droplet size distribution, oil content, total dissolved solids, salinity with respect to time and rheological property have been investigated in the present work. Particle size distributions of freshly prepared oil-in-water emulsion of different crude oil concentration and …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 1–10 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Effect of Curing Time on Physico-mechanical Properties on Dental Composite
Abstract: This study aim to investigate the influence of curing time on physical and mechanical properties of a dental composite cured by using LED light with intensity of 1500 mW/cm2 in the range of 440-480 nm. We prepared the glass ionomer powder by fusion of various inorganic components at high temperature and studied the influence of silica/alumina ratio keeping other inorganic salts such as Calcium fluoride (CaF2), Sodium Fluoride (NaF), Calcium …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 36–47 Read article
-
Biosynthesis, Characterization and Antibacterial Studies of Silver Nanoparticles from Tamil Nadu Major Crop Anacardium occidentale
Abstract: Recent studies have shown that Silver Nanoparticles have physical, optical and catalytic properties. Present work involves the eco-friendly and reproducible synthesis of Silver Nanoparticles from the Anacardium occidentale leaves extract. The synthesized silver Nanoparticle from 1 mM AgNO3 solution through the leaf extract were characterizing was monitored using Ultraviolet-visible (UV-vis) spectrophotometer, Scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), X-ray powder diffraction (XRD) and Fourier transform infra-red spectroscopy (FT-IR).Scanning …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 20, Issue 3, 2018 · pp. 13–22 Read article
-
Formulation Development, Characterization and in-vitro Evaluation of Nano-Lipid Carriers of Ropinirole HCl for Persistent Parkinsonian Management
Abstract: According to a report of World Health Organization (WHO) 2014, Parkinson's Disease (PD) is the second-most neurodegenerative dysfunction of the central nervous system (CNS) of human being effecting 7–10 million people worldwide. It is primarily due to the death of dopamine-generating cells in the substantia-nigra of midbrain. It is symptomatized by tremor, rigidity, bradykinesia, dementia, depression and falls or emerges with the progression of the disease. Ropinirole HCl is a …
Published in Trends in Drug Delivery · Vol. 6, Issue 1, 2019 · pp. 14–23 Read article
-
Fabrication and Characterization of Diacerein Loaded Nanosponge for Topical Delivery
Abstract: Diacerein, an anti-inflammatory drug, which comes under BCS class II, commonly used in treatment of osteoarthritis has limited by its poor solubility and bioavailability when administered topically. This study aimed to develop and evaluate diacerein-loaded nanosponges gel using varying concentrations of ethyl cellulose and polyvinyl alcohol (PVA) to enhance its delivery. Nanosponges were prepared using an emulsion solvent evaporation technique, with different ratios of ethyl cellulose (0.05-0.250%) and PVA (0.2-0.3%). …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 2, 2025 · pp. 26–46 Read article
-
Performance Characteristics of Magnetorheological Elastomer Vibration Isolator
Abstract: Smart materials have ability to alter significantly its properties under external stimuli, such as stress, temperature, moisture, electric or magnetic fields. In today’s engineering era, various smart materials are being used to have controlled behavior in various applications such as automotive brakes, clutches, etc. Magneto Rheological Elastomer (MRE) is one of them, uprising with very huge potential. In this present work, preparation of MRE has been presented. Various MRE mold, …
Published in Journal of Automobile Engineering and Applications · Vol. 1, Issue 2, 2014 · pp. 1–4 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Investigations into the Mechanical and Thermal Properties of Fe3C Compound: A Comprehensive Analysis
Abstract: Exploration of mechanical properties of Fe3C powder using Williamson-Hall analysis by using Mechanical alloying technique. The primary objective of this study is to investigate the lattice strain (LS) and nanocrystalline size (CS) in an Fe3C produced from powder using the Mechanical Alloying Method (MAM). By the repeated mechanical crushing, the LS created by MAM is expected to decrease while the CS is anticipated to reduce the particle size. To accomplish …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 225–234 Read article
-
Experimental Analysis and Predictive Modeling of Mechanical Behavior in Epoxy Composites Reinforced with Waste Tyre Rubber Particles
Abstract: The disposal of end-of-life tyres poses a significant environmental and resource challenge owing to their large volumes and non-biodegradable nature. In this work, we explore the incorporation of waste tyre rubber particles (WTRP) into an epoxy resin matrix to develop sustainable polymer composites and examine their mechanical behavior both experimentally and through predictive modelling. Composites with differing epoxy: WTRP ratios (80:20, 75:25, 70:30 wt.%) and varying rubber particle mesh sizes …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1754–1765 Read article
-
Photochemically Assisted LC–MS Method Development and Validation for Stability-Indicating Determination of Glasdegib in Rat Plasma
Abstract: A simple, precise, and cost-effective LC–MS method was successfully developed for the determination of Glasdegib in rat plasma. The method optimization was carried out by systematically varying key chromatographic parameters, including flow rate, injection volume, analyte concentration, and mobile phase composition, to achieve optimal sensitivity and resolution. A C18 Hypersil BDS column (150 mm × 4.6 mm, 3.5 µm particle size) was used for chromatographic separation, offering effective peak shape …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 1, 2026 · pp. 11–20 Read article
-
A Study on adsorption of Phenol red dye and Chromium (VI) metal ion using activated carbon derived from Lantana camara with the activation of potassium hydroxide.
Abstract: Commercial activated carbons are expensive to produce and regenerate, it is essential to produce activatedcarbon using low-cost raw materials and methods. This study's goal is to demonstrate the possible adsorptionproperties of activated carbon made from Lantana camara for the removal of dyes and metal ions fromaqueous solutions. In this study, activated carbon from Lantana camara stems was obtained through a one-step chemical activation procedure using potassium hydroxide KOH. The surface …
Published in Journal of Nuclear Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 1–10 Read article
-
Optimal PMU Placement in Power Systems Using Graph Theory and PSAT
Abstract: Phasor measurement units (PMUs) play a vital role in modern power systems by delivering synchronized, real-time measurements. These devices enhance system reliability by supporting functions such as monitoring, protection, and control. By accurately capturing voltage and current phasors across different locations, PMUs enable better situational awareness and more effective decision-making in grid operations and management. Determining the optimal location of PMUs is essential to ensure system observability, reduce installation costs, …
Published in Trends in Electrical Engineering · Vol. 15, Issue 2, 2025 · pp. 26–32 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites · Vol. 9, Issue 4, 2021 · pp. 67–80 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 67–80 Read article