Search
96 articles for “Scanning Electron Microscopic (SEM) results”
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Enhancement of Electrical Conductivity of Laterite Derived Ferric Oxide to Facilitate As Anode Materials
Abstract: Laterite is a mineral abundant in ferric oxide and various impurities, including aluminum oxide and silicon dioxide. The extraction of ferric oxide from laterite is accomplished through a cost-effective leaching process employing HCl, NaOH, and Sodium dodecyl sulfate (SDS). Characterization using Xray diffraction (XRD) confirmed the synthesized particles to be α-Hematite nano particles, with an average particle size of 94.21 nm, predominantly falling within the range of 90 nm to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 1–11 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Crystalline Materials: From Crystal Growth and Defect Engineering to Advanced Functional Applications
Abstract: Crystalline materials form the foundation of numerous modern technologies owing to their highly ordered atomic structures and exceptional physical, chemical, electrical, optical, and mechanical properties. Their periodic crystal lattices provide superior structural stability and enable precise control of electronic, thermal, and optical behavior, making them indispensable in microelectronics, photonics, energy storage, catalysis, aerospace, environmental remediation, and biomedical engineering. Rapid advances in crystal growth techniques, nanotechnology, and computational materials science have …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 2, 2026 · pp. 23–31 Read article
-
Spin Coated Polyvinylidene Difluoride / Ionic Liquid Nanocomposite Thin Films with Enhanced Dielectric and Piezoelectric Properties
Abstract: This study introduces a novel approach to enhance the piezoelectric and dielectric properties of polyvinylidene difluoride (PVDF) by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) ionic liquid via a spin-coating method— a processing route that has been rarely reported for PVDF/ionic liquid composites. Structural and morphological analyses using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) confirm the successful integration of [BMIM][BF₄] into the PVDF matrix. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1190–1204 Read article
-
Enhanced Room-Temperature Gas Sensing Performance of 2% Mn-Doped Sri Lankan Natural Graphite Thin-Film Sensors for Ammonia, Acetone, and Ethanol vapors Detection
Abstract: The development of room-temperature gas sensors with high sensitivity, fast response, and low-cost remains a critical challenge for environmental monitoring and safety applications. In this work, we report the fabrication and characterization of a 2% Mn-doped Sri Lankan natural graphite thin-film sensor for the detection of ammonia (NH3), ethanol (C2H5OH), and acetone (C3H6O) vapors under ambient conditions. The sensor was prepared using the doctor-blade coating method on Indium Tin Oxide …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 39–49 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Synthesis and Characterization of Forsterite Incorporated HDPE Composites for Microwave Substrate Application
Abstract: High Density Polyethylene (HDPE) combined with dispersed forsterite (Mg₂SiO₄) powder was utilized to fabricate polymer matrix composites (PMCs) aimed at high-frequency microwave substrate applications. Forsterite powders were synthesized using the mixed oxide method, and their phase purity was confirmed by X-ray diffraction (XRD) analysis. The dispersion and morphology of the ceramic filler within the HDPE matrix were examined through Scanning Electron Microscopy (SEM), ensuring a homogeneous distribution essential for optimal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 109–120 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Influences of Surface Modification of Vetiver Fiber Reinforced Polypropylene Composites
Abstract: Plant-drive vetiver fiber (VF), a significant lignocellulosic fiber, can be included in polymers like polypropylene (PP) in dissimilar ways for attaining preferred features and structure. But its high levels of moisture absorption, poor wettability and inadequate adherence between the fiber and polymer matrix result in debonding with age. To develop the overhead attributes,adequate surface modifications are essential. In our current work, the VF surface was modified by mercerized treatment (MVF), …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 30–44 Read article
-
Preparing Chitosan Hybrid Nanocomposites by Novel Additives for Wound Healing
Abstract: Biomaterials made from chitosan have been discovered to be particularly unique marine polysaccharides (or polycarbohydrates) with a wide range of physico-chemical and biological characteristics suitable for biomedicine field. Due to net positive charge of chitosan, it is essentially capable of chemically binding with negatively charged surfaces A biodegradable blend of chitosan nanoparticles (CHT), poly vinyl alcohol (PVA) and polyethylene glycol (PEG) hybridized with metal oxides nanopowders were prepared and used …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 9–23 Read article