Search
583 articles for “Experimental mechanics”
-
Experimental Study on Properties of Concrete with Phoenix Fibres
Abstract: In this paper, an attempt has been made to investigate the possibility of using phoenix fibre to improve the properties of concrete. The aim of this research is to investigate the properties of concrete with phoenix fibres of various percentages. Mechanical properties such as compressive strength, split tensile strength of concrete using phoenix fibre have been investigated. M20 grade of concrete has been used for this investigation. Mechanical strength tests …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 40–45 Read article
-
Mechanistic and Catalytic Behavior of Os(VIII) for the Chlorpheniramine Maleate and Bromamine-B Redox System: A Kinetics Based Approach
Abstract: Chlorpheniramine maleate (CPM) is an important antihistamine agent. To the best of our knowledge there is no report in the literature about the oxidation of CPM with halogen + 1 oxidant from the stand point of its kinetics and mechanistic chemistry. Hence, a systematic kinetics and mechanistic study on the oxidation of CPM with bromamine-B (BAB) in the presence of NaOH and Os(VIII) catalyst has been carried out at 303 …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 18–31 Read article
-
Development of Robot Arm Fingers with Polymer Soft Materials
Abstract: Lightweight soft material applications have attracted attention to Basalt Fiber Reinforced Polymer (BFRP) laminates because of their impressive mechanical characteristics. The impact response and stress-strain behavior of epoxy resin laminates armored with basalt fiber and banana fiber are investigated during this project using computational and experimental approaches. The hand lay-up method was employed to create laminates with a thickness of 3 mm, dimensions of 300x300 mm², and a layout of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 432–439 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1308–1322 Read article
-
A Study of Improvement of Mechanical Properties of Aluminum by Conventional Casing and Deformation Process
Abstract: Nowadays, Aluminum-Zinc alloy system are the major and rapid development in the field of automotive and aerospace industries for growing demand of efficient vehicles and aircrafts to reduce energy consumption and air pollution. Aluminum is a very soft metal by nature. Different alloying elements were added in the past to increase its strength and toughness. Zinc is considered as a major alloying element in aluminum to increase its strength and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 16–20 Read article
-
Parametric Study of Fiber-Reinforced Concrete with Partial Cement Substitution Using Fly Ash and Rice Husk Ash
Abstract: This research aims to evaluate the impact of incorporating steel fibers [SF] and partially substituting cement with rice husk ash [RHA] and fly ash [FA] on the properties of concrete. SF were added in different volume fractions [0%, 0.25%, 0.5%, 0.75%, and 1.0%], combined with 10% RHA and 20% FA. Initially, the concrete mix contained 30% FA with no RHA, which was then adjusted to a mix of 15% FA …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 171–180 Read article
-
IoT-Based Motor Protection and Control System Using PLC and ESP8266
Abstract: Because of their straightforward design and affordable price, single-phase induction motors are frequently utilized in residential and small-scale industrial settings. However, conventional direct-on-line (DOL) control provides fixed-speed operation and offers limited protection against thermal overload and fault conditions. This article describes the design and implementation of an ESP8266 Node MCU-based PLC- based closed-loop motor control system with Internet of Things features. To increase operating flexibility and maintenance efficiency, the suggested …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 1, 2026 · pp. 54–62 Read article
-
Pt (II) Schiff Base Complex Catalyzed Oxidation of Internal and Terminal Alkenes
Abstract: Pt (II) complexes of Schiff base ligands were found highly efficient towards the catalytic oxidation of internal alkenes and terminal alkenes in dimethylformamide (DMF) solvent under normal pressure of molecular oxygen. In some catalytic reactions, H2O2 was also used as co-oxidant. No diminished catalytic activity was observed even after six to eight repeated catalytic runs. Effect of temperature and extra ligand etc. on the rate of oxidation, nature and percentage …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 7–15 Read article
-
Tubular Linear Induction Motors
Abstract: In this paper a mathematical model of tubular linear induction machines (TLIM) with hollowed induced part is recalled. Moreover, the design criteria of a TLIM with hollowed iron induced part are presented as well as the technological processes to be adopted and the choice of materials to construct the various parts. The methodologies for mechanical assembling and electric wiring are considered too. A prototype with bimetallic induced part has been …
Published in Journal of Mechatronics and Automation · Vol. 7, Issue 3, 2020 · pp. 28–32 Read article
-
Investigation of Mechanical Properties of Banana, Linen and Their Hybrid Reinforced Composite Laminates in Adverse Condition and Analyze Using ML
Abstract: This research investigates the mechanical performance of composite laminates reinforced with banana and linen fibers, focusing on both individual and hybrid fiber combinations. The primary objective is to assess how these natural fiber composites behave under extreme environmental conditions, particularly high humidity and fluctuating temperatures, which are common in aerospace and automotive applications.Key mechanical properties—tensile strength, flexural strength, and impact resistance—are experimentally evaluated to assess the performance and long-term reliability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 25–31 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Experimental Analysis of Glass Fiber Composite on Low Velocity Impacts
Abstract: This research specifically deals with determining the retained tensile strength after loading Glass Fiber Reinforced Polymer (GFRP) composites following low-velocity impact. The purpose is to determine the degree to which these impacts affect the structural performance and mechanical integrity of GFRP materials. Experimental tests were conducted on glass fiber composite specimens in order to observe variation in tensile strength upon impact. The results indicated significant tensile strength reduction in impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 789–796 Read article
-
Automatic Mobile Cover Ejecting Mechanism for Injection Molding Machine
Abstract: Injection moulding is very common plastic processing method for converting raw material plastic to finished product but complex parts have ejection problem. There are problems of ejection in all mobile covers after manufacturing, so, now days, it is performed manually or automatically by robot arm. This robotic arm is very costly, so for that, this automatic mobile cover ejecting mechanism can be used for ease of ejecting mobile cover at …
Published in Trends in Mechanical Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 1–6 Read article
-
Design, Synthesis, and Spectroscopic Elucidation of 3-Methyl-1-Phenylpyrazol-5-One: A Cheminformatics-Aided Approach to Heterocyclic Drug Scaffolds
Abstract: Pyrazolone, a notable heterocyclic compound, has drawn increasing interest due to its broad pharmacological profile and structural versatility. The synthesis, characterisation, and biological assessment of new pyrazolone derivatives are examined in this work. A comprehensive review of existing synthetic strategies is presented, emphasizing green and efficient methodologies. Novel derivatives were synthesized using varied starting materials and catalytic systems, followed by structural confirmation through spectroscopic analyses, including NMR, IR, and mass …
Published in International Journal of Cheminformatics · Vol. 3, Issue 1, 2025 · pp. 29–40 Read article
-
Assessing Concrete Strength Through Substituting Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: This study investigates the strength characteristics of concrete by partially replacing cement with bentonite powder and coarse aggregate with steel slag. The research aims to evaluate the mechanical performance of concrete through compressive strength, split tensile strength, and flexural strength tests. Bentonite powder is substituted at varying levels of 0, 10, 20, and 30%, while steel slag is incorporated consistently at 60% as a replacement for coarse aggregate. The objective …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 1–8 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Evaluation of Mechanical Properties of Carbon Reinforced Composite for Different Process Parameters Using FDM
Abstract: Fused Deposition Modeling (FDM) stands as an advanced rapid prototyping technique, widely appreciated for its efficiency in constructing functional components within a reasonable timeframe. In this experimental exploration, a comparative analysis of mechanical properties was conducted on components manufactured through the FDM technique, specifically with a 20% concentration of SCF-PLA. The study considered process variables like layer thickness, infill pattern, and infill density. Employing diverse process parameters, a standard sample …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 218–228 Read article
-
Study of Evaluating the Feasibility of Banana Stem Fibers and Sugarcane Husk as a Sustainable Additive in Pervious Concrete for Urban Pavements
Abstract: This study explores the integration of eco-friendly materials: banana stem fibers and sugarcane husk, into pervious concrete to enhance its mechanical properties while maintaining high permeability. The research addresses environmental concerns related to agricultural waste disposal and the resource-intensive nature of traditional construction materials. Banana stem fibers, known for their tensile strength and durability, and sugarcane husk, rich in lignin and cellulose, were selected as reinforcements. The fibers were extracted, …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 33–39 Read article
-
Experimental and Numerical Investigation of Corrosion-Induced Failures in Copper-Tin Alloy (Cu-Sn) and Aluminum-Magnesium Alloy (Al-Mg) Connectors: A Stress–Corrosion Coupling Analysis
Abstract: The utilization of an integrated experimental and finite element modelling (FEM) methodology, this study investigates the degradation and failure mechanisms in polymer composite electrical connectors exposed to aggressive environmental conditions. Epoxy- and polyamide-based composites, reinforced with carbon and glass fibers, were subjected to accelerated salt spray and humidity–temperature cycles to simulate prolonged outdoor exposure. Electrochemical and environmental aging experiments revealed that chloride ions and moisture ingress were responsible for matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 366–379 Read article