Search
266 articles for “ARM”
-
Compact PV-PCM System with Heat Recovery Unit for Cogeneration System
Abstract: This paper studies the feasibility of developing a compact system based on a photovoltaic panel with a heat exchanger embedded in a phase change material (PCM) attached to the rear side of the panel. The system generates electric energy at the PV panel, and thermal energy using the removed heat from the panel. The paper analyzes the improvement in PV panel efficiency and the Coefficient of Performance (COP) of the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 14, Issue 1, 2024 · pp. 13–24 Read article
-
Performance of Combined PV-Inverter System: Use of Amorphous and Crystalline Panels
Abstract: This paper is aimed at analyzing the performance of a combined PV-inverter system connected to an external load using either amorphous or crystalline photovoltaic modules. The analysis is based on previous theoretical analysis that uses the efficiency of the PV panel and of the DC/AC inverter as a key parameter. Different configurations using the same energy resource have been simulated to determine the efficiency of the PV panel, DC/AC inverter, …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 1, 2021 · pp. 6–21 Read article
-
PV System Performance in Variable Climatic Conditions
Abstract: This paper is focused to the study of the panel temperature operating under different climatic conditions; to this goal a detailed model has been developed to estimate the response of the panel temperature to various scenarios. The model has been designed based on energy balance, where temperature of the panel is estimated applying heat exchange processes with the environment, mainly convection and radiation, considering the effects of ambient temperature, wind …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 2, 2021 · pp. 11–27 Read article
-
Simulation of A New Configuration for Tidal Power Plants: Analysis of Power Generation Increase
Abstract: A new concept in tidal energy use has been developed and modeled. The system is based on nonconventional distribution of tidal turbines in series rather than in parallel, using the stepped profile of the continental shelf. A hybrid configuration of series and parallel distribution of tidal turbines has been studied and analyzed. A third option with quincunx distribution of the tidal turbines has also been studied. The results have been …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 3, 2021 · pp. 8–22 Read article
-
SEASONAL TEMPERATURE IMPACT ON THE DRIVING RANGE OF ELECTRIC VEHICLE: EFFECTS ON CARBON EMISSION SAVING
Abstract: The main goal of the project is to analyse the impact of the seasonal temperature on the performance of the battery of electric vehicles, thus on the driving range. A simulation study has been developed for a Tesla model 3 Mid Range operating in the area of Lyon (France). The simulation has been run for a year based on monthly average temperatures, developing a process to estimate daily temperature evolution. …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 12, Issue 2, 2022 · pp. 10–34 Read article
-
Control System for Heat Generation in a Hybrid PV/T System
Abstract: The study analyzes the performance of a PV/T unit with a PCM attached to the rear side of the PV panel in direct contact. The unit works removing heat from the panel and using this heat for external applications. The PCM has a heat exchanger inserted to transfer heat removed from the PV panel and stored in the PCM to a water flow that circulates through the heat exchanger. The …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 1, 2023 · pp. 1–16 Read article
-
Analysis and Evaluation of the Electric Vehicles Carbon Footprint: Application to Environmental Urban Areas
Abstract: This paper analyzes and evaluates the carbon footprint of electric vehicles, Hybrid Electric Vehicle (HEV), Plug-in Hybrid Vehicle (PHEV), and Electric Vehicle (EV). A complete survey of the transformation process of fossil fuels like petrol, gas, or carbon into electricity for the batteries of electric vehicles represents the goal of this work, following the well-known methodology “from well to wheel”. A comparative analysis of urban cars powered by internal combustion …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 2, 2023 · pp. 27–47 Read article
-
VARIATION OF THERMAL CONDUCTIVITY WITH POROSITY
Abstract: Thermal conductivity in porous media as a function of the grain size and porosity has been studied establishing a relation between these two parameters. The study has been developed for a homogeneous porous medium with grain size in a very close range of particle diameter. The study has been extended from very small particles to large ones, to cover most of the real grain size. As a result of this …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 1, 2020 · pp. 47–58 Read article
-
SYMMETRY AND ASYMMETRY MODEL FOR THERMAL CONDUCTIVITY IN POROUS MEDIA
Abstract: This paper focuses on determining thermal conductivity in porous media using symmetry and asymmetry models. Since porous media are not uniform and homogeneous in most of the cases, anisotropy must be taken into account, what derives in the application of an asymmetry model as thermal gradients are not equal in all directions. The paper demonstrates that, under certain conditions, isotropic conditions, therefore, symmetry model can be applied to non-homogeneous or …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 2, 2020 · pp. 38–51 Read article
-
Theoretical modelling of heat transfer in non-homogeneous porous media
Abstract: The paper is focused on the study and analysis of heat transfer in geothermal substrates made up of non-homogeneous porous media. The paper analyses the influence of porosity on the heat transfer as a result of the combination of conduction and convection mechanisms that take place in non-homogeneous porous materials. As a result of the combined effect heat transfer is not homogeneously distributed throughout the cross section of the geothermal …
Published in Journal of Geotechnical Engineering · Vol. 9, Issue 2, 2022 · pp. 44–51 Read article
-
Carbon dioxide injection to remove shale gas from sedimentary clayey schists
Abstract: This paper proposes an alternative method to the fracking technique to obtain shale gas, injecting compressed carbon dioxide in the subsoil. The injection of a pressurized gas like carbon dioxide into a porous media provokes the removal of existing gas into the pores, provided the pressure of the injected gas is high enough. The design of the adequate geotechnical structure makes it possible to inject pressurized carbon dioxide and extract …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 1, 2023 · pp. 38–49 Read article
-
Seasonal Variation of Electric Vehicles Autonomy: Application to AC/DC Dual Voltage Operation
Abstract: In this work, a study to predict battery performance and autonomy for a dual type of electric engine, 480 VAC and 360 VDC, has been developed. The study has been conducted in vehicles of mass between 1000 and 3000 kg with battery capacity in the range of 40 to 100 kWh. The process has been simulated using reference values and modeled for specific driving conditions. The simulation has been developed …
Published in Journal of Mechatronics and Automation · Vol. 7, Issue 3, 2020 · pp. 1–15 Read article
-
Performance test to determine electric vehicle driving range
Abstract: A new method to estimate the driving range in electric vehicles has been developed. The new method is based on full electric energy supply from a unique lithium-ion battery that equips the electric vehicle. The simulation method includes engine consumption as well as auxiliary systems and accessories that are currently powered by a servicing lead-acid battery. The modeling uses an AC/DC double electric circuit to represent the AC electric engine …
Published in Journal of Mechatronics and Automation · Vol. 8, Issue 2, 2021 · pp. 10–20 Read article
-
CONTROL SYSTEM FOR EXTENDED DRIVING RANGE IN ELECTRIC VEHICLES
Abstract: This paper is aimed at designing a control system that regulates the power and energy supply to the electric engine to optimize the battery use, so the driving range of the electric vehicle can be extended. The method is based on controlling the acceleration of the electric vehicle and maintaining it within specific limits as well as to use the inertial forces to help the vehicle in saving energy while …
Published in Journal of Mechatronics and Automation · Vol. 8, Issue 3, 2021 · pp. 32–43 Read article
-
Design of a control system for determining the autonomy of electric vehicles (EVs)
Abstract: The main goal of this project is the development of an advanced system for controlling the performance of lithium batteries that equip electric vehicles by improving previous design of the control system so the real driving range of an Electric Vehicle (EV) can be determined within the highest accuracy, considering the driving conditions, driving attitude of car drivers and external influences.
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 2, 2022 · pp. 1–16 Read article
-
Hybridization of Photovoltaic Panels and Thermoelectric Generators: Energy Efficiency Improvement
Abstract: Heat removal from PV panels has been revealed as a feasible and operational solution to reduce the temperature of the panel and increase energy efficiency. In this paper, the use of a thermoelectric generator (TEG) attached to the photovoltaic panel is proposed. A set of Peltier cells has been designed, built, and coupled to the rear side of a PV panel to remove the heat flow generated at the PV …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 3, 2022 · pp. 29–46 Read article
-
Modelling and Simulation of Urban Smart Micro Grid Operation
Abstract: The project is aimed at the development of a new protocol that enhances the operation of urban micro grid operation. The new protocol improves the capacity of management as well as the energy efficiency of the smart grid as an entire system. The modelling considers the interconnectivity between sources of energy and consumption centers, the daily hourly power generation by the different sources, and the hourly energy demand profile. The …
Published in Journal of Nuclear Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 5–28 Read article
-
Management of Domestic Water Closed Loop System
Abstract: The paper describes a new technological process to reuse, thermally and hydraulically, the water inhome installations. The aim of the process is to reduce water wasting and take advantage of residualthermal energy to minimize energy expenditure. The system is especially developed for homeinstallations although it is also suitable for larger facilities. Filtering processes based on porous mediaensure the physical and chemical water quality while chlorination or disinfection by ultravioletradiation guarantees …
Published in Journal of Water Resource Engineering and Management · Vol. 10, Issue 3, 2023 · pp. 12–22 Read article
-
Navigation System for Robots Using Passive RFID with Wireless Feature Changing on ARM7 (LPC2148) Platform
Abstract: RFID (Radio Frequency Identification) technology is well known for being easy to use and the features possessed. Mostly it is used for security or authentication purpose as each RFID contains a unique identification code. This unique identification feature can also be used in different ways. The study of other RFID techniques will be helpful for better service and security. The navigation system for robots using RFID is proposed in this …
Published in Trends in Electrical Engineering · Vol. 6, Issue 3, 2016 · pp. 58–66 Read article
-
A Review on Impact Analysis of Composite Armor
Abstract: Understanding the type of wave generated in a faulty region is important when using one of the main non-destructive testing tools, ultrasonic research. Recent dispersed research demonstrates that because of their low impact execution, layered composites have limited uses in cutting-edge auxiliary frameworks. The purpose of this inquiry is to provide new scientists who are working on ballistic-related topics with broad information on the most frequently used materials and ballistic …
Published in Trends in Mechanical Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 1–9 Read article