Search
1964 articles for “5” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Comparative Analysis of High Speed Comparator for A to D Converters
Abstract: In this paper dynamic comparator along with the output buffer stage has been introduced. The simulation is carried out in 130 and 90 nm technologies. The supply voltage for 130 nm is 1.3 V and for 90 nm is 0.9 V. Different analyses for various characteristics of the comparator such as ICMR, delay, offset voltage and power dissipation is carried out in 130 and 90 nm CMOS technology. The comparator …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 4–10 Read article
-
Characterization of High Performance Third Generation Current Conveyor using CMOS Technology
Abstract: In this paper, Conventional Third generation(CCIII) and Dual-Output Cascoded Third Generation Current Conveyor(DOCCIII) is presented. Here, both are simulated in ELDO SPICE Mentor Graphics using 90 nm CMOS technology at 0.8 V supply voltage. High performance cascoded current mirrors provide high output impedance. Third generation current conveyer has the advantages of wide current and voltage bandwidths, controlled intrinsic resistances at terminals X,Y and Z. By the use of high performance …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 54–63 Read article
-
Design of 8 Bit High Speed Pipelined ADC
Abstract: High-speed, medium-resolution, analog-to-digital converters (ADCs) are important building blocks in many electronic applications. The demand for high-speed, medium resolution, low power ADCs is satisfied by various ADC architectures like folding, flsubranging, pipeline etc. Of these, pipeline architecture has proven to be the most efficient for applications such as digital communication systems, data acquisition systems and video systems. Pipelined ADC offer attractive combination of high-speed, high-accuracy and low power consumption, which …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 71–80 Read article
-
CMOS Gm-C IF Filter using SCA for Dual Band Receiver
Abstract: This paper deals with design of folded cascode OTA-C filter, which works for frequencies for RF application, based on transistor sizing methodology and simulation results are performed using SPICE software and BSIM3V3 model for CMOS 0.18 μm process, show that the designed folded cascode OTA has a 52 dB DC gain and provides a unit gain bandwidth of around 400 MHz. Design of CMOS Gm-C 2nd order Biquad filter implementation …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 3, 2015 · pp. 18–36 Read article
-
Design and Implementation of an Efficient Ternary Control Unit
Abstract: Multi-valued logic (MVL) is emerging as a thrust area of research due to several advantages offered by them over the conventional binary logic. Ternary logic is a promising alternative to the binary logic design technique thereby attracting a wide community of researchers to contribute in the design of ternary processor. The control unit is effectively the nerve center of a processor that plays a vital role in generating the appropriate …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 3, 2015 · pp. 55–70 Read article
-
Design of a 10-bit Segmented Current-Steering CMOS D/A Converter for High Speed Communication System
Abstract: In the present work, design of a 10-bit digital-to-analog (D/A) converter using current segmentation architecture in 0.35 µm double-poly, four-metal, CMOS process has been attempted. The measured differential nonlinearity (DNL) and integral nonlinearity (INL) are 0.8 and 2.5 least significant bits (LSBs) respectively. For sampling frequency of 12-MSample/s, the spurious free dynamic range (SFDR) is better than 56 dB for signal up to Nyquist rate. The worst case power consumption …
Published in Journal of VLSI Design Tools and Technology · Vol. 2, Issue 1-2-3, 2012 · pp. 38–43 Read article
-
Analysis and Implementation of Folding and Interpolating Analog to Digital Converter using Submicron CMOS Technology
Abstract: This paper presents folding and interpolating ADC with resolution of 5 bit. The simulation result is carried out using 0.18 μm CMOS process technology with supply voltage 1.8 V. This folding and interpolating ADC consumes less power than other, and it is 10 mW. The rate of conversion is 50 MS/S. So, it is suitable for low power application and medium resolution portable devices. Keywords: Folding ADC, interpolating, ADC, low …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 1, 2017 · pp. 35–40 Read article
-
Performance Analysis and study of losses in GaAs Multi Junction Solar cells using Current and Voltage Measurements
Abstract: Cross section coordinated, triple-intersection sunlight based cells with strain repaid quantum spots (QDs) in the GaAs center cell were developed by Metal-Organic Chemical Vapor Deposition (MOCVD). Structures with various quantities of QD layers are contrasted with gauge structures with no QDs. Quantum proficiency and light I-V estimations show an expansion in hamper thickness and debasement of the open circuit voltage for QD sun powered cells. The QDs don't work on …
Published in Journal of VLSI Design Tools and Technology · Vol. 12, Issue 1, 2022 · pp. 1–7 Read article
-
Constructed Wetlands: An Emerging Paradise for Sustainable Treatment of Wastewater
Abstract: AbstractSufficient supply of water both in terms of quantity and quality has always been a provoking effort mostly across all the developing cities of the world. Situation is nowhere different in India too where past decades have seen a rapid growth in not only industries but urbanization as well and availability of water round the country shows a wide disparity of range from about 80 litres per capita per day …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 1–5 Read article
-
Development of Mathematical Model to Predict Annual Runoff in Port Harcourt City, Rivers State, Nigeria
Abstract: This paper is aimed at monitoring and predicting annual runoff of Port Harcourt city for a classified area type and flat land of 0–5% slope. Mathematical models were developed to monitor and simulate annual runoff of an area type of 30% impervious (paved), 50% impervious (paved) and 70% impervious (paved) within the Port Harcourt city. The analysis of annual rainfall and annual runoff data gives a coefficient of determination of …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 29–36 Read article
-
Floodplain Inundation Modeling and Mapping for Geray River: Nile Basin, Ethiopia
Abstract: Flood is among the most devastating natural hazards in the world claiming lives and properties more than any other natural phenomena. During high flow, the Geray River flooded the vicinity of the area and causes loss of cultivated land and life. The objective of this study describes the flood extent and depth in the Geray River for different flow conditions. This research involves the integration of HEC-HMS, HEC-RAS, and GIS …
Published in Journal of Water Resource Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 25–45 Read article
-
Rainfall-runoff Modeling using HEC-HMS Hydrologic Model for Guder River Watershed, Blue Nile Basin, Ethiopia
Abstract: Rainfall-runoff modeling is important for a number of hydrologic applications including flood forecasting, water resource planning and management. This study presents the result of a watershed rainfall-runoff modeling for Guder river watershed having area of 6597 km 2 using Hydrologic Engineering Center-Hydrologic Modeling Systems (HEC-HMS). The watershed runoff is varying spatially and temporally due to manmade factors and natural factors on the watershed. These issue needs efficient water resource planning …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 2, 2021 · pp. 62–77 Read article
-
Appraisal of Household Potable Water Accessibility in Sub–Urban Areas of Oyo State: Geographic Information System and Remote Sensing Approach
Abstract: This study centred on assessing potable water accessibility in sub-urban areas using Fiditi as a case study. This study adopted a service area network and overlay operation in ArcGIS to achieve the aim of this study. Locational coordinates of all the facilities were obtained through Garmin 76 handheld GPS. Also, ground truthing was adopted to distinguish residential buildings from non - residential buildings. Coordinates (X.Y, Z) of the study were …
Published in Journal of Water Resource Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 1–14 Read article
-
Seismic Behaviour of Curved Cable-Stayed Bridge
Abstract: Cable-bridges constructed in a more unique style for aesthetic and structural reasons. Curved cable bridges are not a common type of Highway Bridge in India, which are usually built at interchange which allows transportation of traffic from one highway to another. The current study presents the effect of horizontal curvature on the cable-stayed bridges. For this study, six finite element models of the cable-stayed bridge are developed with a different …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 14–22 Read article
-
Nano-additives in Concrete: Present Scenario and Challenges
Abstract: This research work reviews on nanomaterials in concrete. Now, the conventional concrete properties of nanomaterial utilization have been introduced various attentions to increase. Ultimately, as an introduction, nanomaterial is increasing the strength and durability of the concrete. The nanomaterial is defined as the material that includes the particle size which smaller than 200 nm. Nanomaterials must be at least 500 nm in size. During the research of concrete in the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 11–20 Read article
-
Comparative study on defluoridation by adsorption using rice husk ash, tamarind seed powder and activated
Abstract: In the present study, the ability and suitability of low cost adsorbents such as rice husk ash (RHA), tamarind seed powder (TSP) to adsorb fluoride ions was investigated in jar test apparatus and results were compared with that of commercially available activated charcoal powder (ACP). The major parameters such as pH, concentration of F- ions, stirring rate, contact time and different adsorbent dosages were studied and optimized. The maximum removal …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 25–32 Read article
-
Feasibility Studies on Cement Mortar Replaced with Ceramic Tile Waste as Secondary Binder
Abstract: This paper presents the results of experimental works focused on replacement of ceramic waste materials with cement in the production of cement mortar. The aim of this research work is to find the optimum percentage replacement of cement by ceramic tile waste in percentage replacement (5 to 25, 50 and 100%) mortar mixes. The ceramic waste tiles are mechanically crushed down ultrafine ceramic waste (UCW) powder passing 600 μ and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 68–75 Read article
-
Effect of pH on Shear Strength Behavior of Granular Soil
Abstract: In this research, the performances of pH value on shear strength behavior of granular soil have been studied. The shear strength of soil is an important term in most of the foundation engineering problems such as the bearing capacity of shallow foundation, slope stability of dam/embankment and lateral earth pressure on retaining walls. A series of direct shear tests were conducted on two types of dry granular soils (taken from …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 8–11 Read article
-
Effect of Fiber Hybridization on Compressive Strength and Water Permeability of Steel Fiber Reinforced Concrete
Abstract: The paper presents results of an investigation conducted to study the compressive strength and water permeability of hybrid steel fiber reinforced concrete (HySFRC). Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations. Mixes with no fibers were also cast for comparison purpose. Three fiber volume fractions, i.e., 0.5, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 11–16 Read article
-
Strength Assessment of RCC Beams Subjected to Corrosion
Abstract: The damage assessment of civil structural members is one of the most important and recently emerging fields in engineering. Deterioration of a structure may occur due to a host of factors such as poor workmanship, improper maintenance, atmospheric effects, accidents, natural calamities. Certain causes like environmental effects, natural calamities cannot be controlled. Therefore, durability of concrete structures especially those exposed to aggressive environments is of great concern. Many deterioration causes …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 139–152 Read article