Search
1224 articles for “GRA”
-
An Experimental Study on The Effect of Geopolymeric Composite Reinforcement on Soil Subgrade for Flexible Pavements
Abstract: The use of geo-synthetics, such as geotextiles, has the potential to enhance the inherent engineering and geotechnical properties of subgrade soils that exhibit poor conditions. The use of geotextiles in pavement construction has many advantages, including enhanced subgrade strength and the ability to construct flexible pavements that are both efficient and cost-effective since it reduces the pavement thickness. In the realm of flexible pavement system development, the significance of subgrade …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 132–140 Read article
-
Simplified Solution to Analysis Risk Assessment of Reinforcement type Soil Wall Considering Seismic Waves with Uniform Surcharge
Abstract: Due to failure of reinforced soil wall in various country the various risk factor are associated to these failure. In the present pseudo-static analysis some risk factor analysis have been done by considering the seismic waves with uniform surcharge and also consider surcharge’s inertial behavior at risk factor of horizontal and vertical coefficients of accelerations at kh = 0.24, 0.36 and kv = 0.12, 0.18 taking into account. The earlier …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 452–458 Read article
-
Behaviour of Tri-Directional Advanced Composite Beam Using Finite Element Method
Abstract: The present work shows the modal analysis of tri-directional advanced composite beams using the finite element method. The mechanical parameters of the beam are supposed to vary in the direction of beam length (x), width (y), and thickness (h). In this work material parameters are assumed to vary according to the exponential rule of functionally graded material. To authenticate the accuracy of the present work, the result with a particular …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 610–620 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Wear Attribute of Aluminium Metal Matrix Composite Reinforced With MWCNT, Produced By FSP, On A Vertical Milling Machine
Abstract: The exceptional properties of Aluminium metal matrix composites (AMMCs) like good hardness, specific strength, enhanced wear rate made huge demand in the automobile and aerospace industries. The classical methods of manufacturing AMMCs leave problems at the interface of matrix and reinforcement segregation, like an agglomeration of reinforcements, wettability etc. To overcome this, an alternate, innovative method of fabricating aluminium matrix surface composites has been invented, which is termed friction stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 525–539 Read article
-
Alzheimer’s Disease Detection Using ML Algorithm
Abstract: A degenerative neurological state of affairs, Alzheimer's disease (AD) gradually impairs cognitive and functional capacities, especially in people over 65. Early AD detection is crucial for efficient management and treatment prep. This study delves into novel approaches for the early detection of AD using non-invasive methods. We've implemented a blend of neuroimaging data analysis and machine learning algorithms to pinpoint markers indicative of the disease during its initial phases. Our …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 53–57 Read article
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe 3 O 4 @ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe 3 O 4 @ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe 3 O 4 ) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored …
Published in Journal of Polymer & Composites Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Iota carrageenan, a Sustainable polymer transformed into a nanogel formulation, by using environment friendly method for antitumor action
Abstract: In the pharmaceutical field, the utilization of polymers, both in their natural form and through chemical modifications, holds immense importance. In this context, a novel and eco-friendly method for the synthesis of nano carrageenan-based polymers has been developed. The efficacy of carrageenan in this domain is attributed to its crosslinking and biological properties, which are largely influenced by its sulfate ion content. This study aims to formulate nanogels via a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 881–889 Read article
-
Drilling Parameters Optimization in LM6/B4C/Fly ash Hybrid Composites by Taguchi Technique
Abstract: Aluminium matrix composites (AMCs) are challenging to machine due to its abrasive characteristics. Because of the broad adoption of MMCs, it is vital to create sufficient equipment to facilitate efficient manufacturing. The current study utilizes signal-to-noise ratio (S/N) analysis to determine the ideal machining parameters for drilling AMC’s. The goal with this study is to investigate the effect of feed rate (FR), drill type (D), speed (SS), reinforcing material R …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 890–897 Read article
-
Physico-Chemical Assessment of River Benue to Determine Pollution Levels Using Chemometric Models.
Abstract: The effects of pollution on water have been reviewed. This study is aimed at determining the level of pollution of the River Benue, with the view of assessing its use as potable water. Different analytical techniques including titrimetry, gravimetry, potentiometry, and spectrophotometry were used for the study. The total hardness gave (22.28 mg/L and 41.87 mg/L) for dry and rainy season respectively. Electrical conductivity gave (91.35 mg/L and 54.10 mg/L) …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 43–76 Read article
-
Integrative Machine Learning Approaches for Predicting the Rheological Behaviour of Soft Magnetorheological Elastomers
Abstract: Magnetorheological Elastomers (MREs) are advanced composite materials known for their ability to alter mechanical properties under external magnetic fields, making them highly valuable in adaptive damping systems, vibration control, and smart devices. The accurate prediction of rheological behavior in soft MREs remains a significant challenge due to the complex interplay between material composition and magnetic fields. To address this challenge, this study employs a multi-pronged approach that integrates traditional material …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1083–1096 Read article
-
Aerodynamic Influences on Structures with Varied Plan Configurations
Abstract: The wind-induced effects on tall buildings demonstrate a level of unpredictability, attributed to the intricate influence of the building's plan shape on the distribution of wind loads. The oscillations experienced by tall structures, both longitudinally and laterally, are influenced by factors such as wind direction, building configuration, height, and structural characteristics. This investigation is centred around examining the impact of wind on tall buildings featuring diverse plan cross-sectional shapes. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 377–388 Read article
-
Multidimensional Impacts on Bryophyllum Pinnatum for the Potential of Obesity: A Review
Abstract: Global public health concerns related to obesity are growing. Several comorbid illnesses, including cardiovascular disease (CVC), gastrointestinal disorders, type 2 diabetes (T2d), joint and muscle disorders, respiratory difficulties, and psychological disorders, are significantly more common in obese patients. The widespread misconception that obesity stems solely from a lack of self-control is gradually losing its stigma as awareness about fat-related issues grows. Instead of synthetic drugs herbal or medicinal plants are …
Published in International Journal of Biochemistry and Biomolecule Research · Vol. 2, Issue 2, 2024 · pp. 42–51 Read article
-
Drilling Fluid Characterization (Filtration Test)
Abstract: This report explores the formulation and testing of a water-based drilling mud used in drilling operations, where fluid circulates through the drillstring and returns to the surface. The study mixes 315 ml of water with 35 ml of corn oil to create the drilling mud and investigates the role of barite in increasing mud density to maintain a hydrostatic pressure capable of managing formation pressure. The findings reveal that increasing …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 17–26 Read article
-
Identification and Prioritization of Critical Erosion Prone and Water Potential Areas of Manandragarh Watershed Using HEC-HMS for Management
Abstract: This study was carried out at Indira Gandhi Krishi Vishwavidyalaya, Raipur (CG) on hydrological modelling and development of soil and water conservation plan for critical erosion prone and water potential sub-watersheds of Manendragarh watershed of upper Hasdeo subbasin in Chhattisgarh using Hydrological Engineering Centre-Hydrological Modelling System (HEC-HMS). The Hydrological Engineering Centre-Geo Hydrological Modelling System (HEC-Geo HMS) was utilized for developing the model setup, while the HEC-HMS model was employed to …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 1, 2025 · pp. 26–44 Read article
-
Fabrication and Mechanical Characterization of Hybrid Metal Matrix Composite Castings
Abstract: This work investigates and addresses the casting of a novel hybrid composite material with tungsten carbide and aluminum-silicate particles mixed at varying weight fraction rates. Production of hybrid composite has some advantages if it is processed by near net shape techniques. The simplest method for dealing with this hybrid composite is the turbulence produced by the vortex agitating technique. The vortex mixing method is used in this study to create …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 32–38 Read article
-
Enhancing Efficiency and Adaptability of Double Pipe Heat Exchangers: Design and Implementation Perspectives
Abstract: The present study focuses on exploring the intricacies of twin pipe heat exchangers, highlighting their versatility and efficiency in various industrial applications. Twin pipe heat exchangers consist of concentric pipes through which fluids flow in opposite directions, enabling effective heat transfer across significant temperature gradients. This design is particularly advantageous in scenarios involving low flow rates or highly viscous fluids, as well as moderate heat loads. One of the key …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 63–70 Read article
-
Effect of Multiwalled Carbon Nanotubes on Compressive Strength of Concrete
Abstract: The objective of the suggested study was to examine the possible application of multi-walled carbon nanotubes (MWCNTs) as nano reinforcement to improve concrete's compressive strength. Single-walled carbon tubes (SWCNTs) and multi-walled carbon tubes (MWCNTs) are two groups of cylindrical-shaped carbon allotropes known as carbon nanotubes (CNTs). Tests are carried out 7, 14, and 28 days after the MWCNTs are reinforced in M20 grade concrete at 0.02% and 0.025% (by weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 01–08 Read article
-
Implementing and Analyzing Network Commands in Cloud and Edge Computing Environments with Cisco Simulators
Abstract: The present review examines edge and cloud topologies and compares them according to latency. Instead of using distant data centers like cloud computing platforms, edge computing designs process data physically close to the source. Increased demand for Internet of Things (IoT) devices, which are growing more concerned with real-time data processing and analysis, has fueled the expansion of edge computing and cloud computing. In essence, each of these designs offers …
Published in International Journal of Satellite Remote Sensing · Vol. 2, Issue 2, 2024 · pp. 62–69 Read article