Search
1991 articles for “temperate” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Tuning the physical properties of spray pyrolysed nanocrystalline CdO thin films by varying the substrate temperature
Abstract: Spray pyrolysis technique has been employed to deposit cadmium oxide (CdO) thin films on glass substrates preheated to different temperatures (250, 350, 400 and 500°C). Structural, morphological, optical and electrical characterization studies were performed on the films to study the behavior of the films. The thicknesses of the films prepared at different substrate temperatures vary from 497 to 465 nm. X-ray diffraction analysis reveals that the films are polycrystalline exhibiting …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 1, 2020 · pp. 31–41 Read article
-
Investigations on Potential Relationship between Biomass and Surface Temperature using Thermal Remote Sensing over Tropical Deciduous Forests
Abstract: The forest temperature and forest biomass are important parameters in concern to forest ecosystem and related parameters. Satellite remote sensing data is the best possible source for obtaining information on both regional and global scales. Landsat TM is used to retrieve the surface temperature using spectral information and radiation heat flux parameters for a tropical deciduous forest area of Munger forests (Bihar, India). Surface emissivity values derived from spectral band …
Published in Research & Reviews : Journal of Space Science & Technology · Vol. 2, Issue 3, 2013 · pp. 13–18 Read article
-
Anisotropic Debye-Waller Factors and Debye Temperatures in Hexagonal Close-Packed Elements: A Comprehensive Compilation and Analysis
Abstract: In this study, we have investigated the anisotropic behavior of Debye-Waller factors (DWFs) and Debye temperatures (DTs) in three distinct materials: hexagonal rhenium (Re), osmium (Os), and thallium (Tl). We conducted a comparative analysis, aligning our experimental data on directional Debye temperatures with theoretical calculations. This exercise provided valuable insights into the concurrence between practical and theoretical approaches, thereby offering a critical evaluation of the accuracy and reliability of theoretical …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 32–39 Read article
-
Prediction of temperatures and residual stresses during FSW of AA2024 and AA7075 with copper using HYPERWELD software
Abstract: This paper investigates the temperature at different workpiece and tool pin sections. In this investigation, various materials are utilized, for example, AA7050, AA2024, and Copper, for other process parameters. Tool rotational speed, tool tilt angle, and welding speed are process parameters. Thermal distribution results are examined with the assistance of these process parameters. Altair’s Hyper Weld, a preeminent computer-aided engineering (CAE) application for the simulation of friction stir welding, has …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 101–112 Read article
-
Remote Sensing and GIS-based Analysis of Land Surface Temperature Dynamics and Land Use Changes in Vijayawada, India
Abstract: The alteration of land use/land cover (LULC) has significant environmental consequences since it is strongly linked to long-lasting land degradation and leads to diverse environmental alterations. It is crucial to monitor the locations and distributions of changes in land use and land cover (LULC) to comprehend the connections between government actions, policy choices, and resulting LULC activities. Modern systems for protecting the environment and managing natural resources now depend heavily …
Published in Journal of Remote Sensing & GIS · Vol. 15, Issue 1, 2024 · pp. 20–27 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
On the Relationship between Equivalent Potential Temperature (theta-e) and Convective Rain over Nigeria and Togo
Abstract: Convective precipitation is a key feature of West Africa's climate, driven by the West African monsoon system. Accurate forecasting of convective storms is challenging but essential for disaster mitigation in the region. This study investigates the ability of using equivalent potential temperature (theta-e) for predicting convective rainfall events in West Africa. Theta-e combines the thermodynamic effects of moisture and temperature to represent total energy available for convection. Daily rainfall and …
Published in International Journal of Atmosphere · Vol. 3, Issue 1, 2026 · pp. 26–43 Read article
-
Stretchable Elastomer–PCM Composites with Bluetooth-Enabled Temperature Monitoring for Wearable Healthcare IoT Devices
Abstract: The rapid advancement of wearable healthcare technologies has created a growing demand for multifunctional polymer composites capable of simultaneously providing mechanical flexibility, thermal energy management, electrical conductivity, sensing capability, and wireless communication. In this study, a stretchable elastomer-based polymer composite integrated with a phase-change material and a Bluetooth Low Energy temperature monitoring system was developed for wearable healthcare Internet-of-Things applications. The polymer composite was fabricated using an Ecoflex silicone elastomer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 241–257 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
In Situ Synthesized Cu(OH)2-Al2O3: A Novel and Highly Efficient Nano-Catalyst System for One pot Synthesis of N-Substituted Triazole at Room Temperature
Abstract: One pot room temperature synthesis of N- substituted Triazoles has been demonstrated using a novel catalyst system Cu(OH)2-Al2O3. The catalyst has been synthesized by a very simple one step chemical process. The catalyst is highly efficient and reusable with isolated yield as high as 87% even at the 4th reuse. The catalyst could also be used with water as a solvent with a little longer reaction time. Graphical Abstract: One …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 1, 2014 · pp. 8–14 Read article
-
Multisensor Data Fusion based Intelligent Temperature Measurement Technique
Abstract: Design and validation of a temperature measurement technique using fusion of temperature sensor like resistance temperature detector (RTD), and thermistor is proposed in this work. The objective of proposed work is to design a technique using fuzzy logic algorithms to fuse two different sensors having dissimilar characteristics. A fuzzy logic system is trained to produce an output for a temperature measurement system which is (a) more linear input-output characteristics as …
Published in Journal of Control & Instrumentation · Vol. 5, Issue 2, 2014 · pp. 1–13 Read article
-
Some Creep-Rupture Data Analytics as Applied to AISI 310S Superalloy Austenitic Stainless Steel Sheets at Elevated Temperatures and High Applied Stresses
Abstract: Creep-rupture of AISI 301S stainless steel is analyzed at 973-1073K and 40-150MPa. Various creep curves and creep rate curves are compared to understand the effect of temperature and applied load. Creep deformation and creep fracture mechanisms are manipulated from concerned mechanism maps. Creep deformation follows high temperature climb. Creep activation energy so obtained is 345KJ/mol. It is larger than activation energy for self-diffusion in pure FCC iron (that is 270-311kJ/mol). …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 54–58 Read article
-
Mechanical Behaviour of AISI 204 Cu Metastable Low Nickel Austenitic Stainless Steel Sheets at Various Constantly Maintained Elevated Temperatures
Abstract: Mechanical behaviour of AISI 204 austenitic stainless steel is analyzed at 298-873K and also a comparison with that of AISI 304 is done. Room temperature tensile properties are obtained based on an average of properties evaluated on specimens prepared with specimen length axes at 0°, 45° and 90° to sheet rolling direction. Room temperature flow curves are obtained as a function of nickel content and sheet thickness. High temperature tensile …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 29–36 Read article
-
Anti-static Additive and Particulate Formation in Jet Fuel at Low Temperature
Abstract: Over-dosed anti-static additive Stadis 450 can form particulates in jet fuel when temperature goes down to around -38oC. The particulate formation was observed during freezing point test. The jet fuel produced by Toruk refinery of Arabian Gulf Oil Company of Libya had freezing point of about -55OC which is lower than required-47OC for jet fuel A-1. Key words: Libya, Tobruk refinery, Sarir refinery, Jet Fuel, Anti-Static Additive, Particulate, Low Temperature
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 1–4 Read article
-
Monitoring the Effect of Temperature and Time on the Characteristics of Metal Sample Corrosion Rate Inhibition using Selaginella myosurus and Pneumatoptens pennigera (GF) Plants
Abstract: This research showcases the effect of temperature and time on the characteristics of metal in terms of weight loss and corrosion rate using Selaginella myosurus or Pneumatoptens pennigera Plant. The weight loss was monitored at temperature range of >300OC to < 385OC and time period of 20hr to 120hr as well as decrease and increase was experienced. However, the research further demonstrates the decrease in weight loss of the metal …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 10–19 Read article
-
Groundwater Darcy Velocity from underground Temperature: A Focus on the City of Turin (NW Italy)
Abstract: We report on an application of a methodology for inferring water transfer in a shallow aquifer by using analytical models of interpretation of heat transport by advection and conduction in permeable horizons. In this research, we highlight as the statistical interpretation of thermal data is a tool to obtain a quantitative estimation of the horizontal component of the Darcy velocity in a shallow aquifer. This study is based on the …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 19–29 Read article
-
Intelligent Temperature Controller System Design
Abstract: AbstractThe goal is to structure and actualize a mechanized Temperature control framework utilizing installed framework configuration to control the temperature of a framework. All things considered; it is essential that those in designing fields comprehend the advances partner with this region. My paper will incorporate the plan and development of a microcontroller based mechanized temperature control framework alongside a temperature show utilizing seven fragment show. A working framework will at …
Published in Recent Trends in Sensor Research & Technology · Vol. 6, Issue 2, 2019 · pp. 5–10 Read article
-
Constraints for Defining the Temperament of A‘Ḍā’ Mufrada (Simple Organs)
Abstract: Purpose: This work is done to test, validate, and form factual modalities to find out the temperament of simple organs with the help of different kinds of physiological properties. Background: The temperament of simple organs described by Unani scholars is in accordance to biophysical entities, and they also had been discussed that those organs whose blood supply is more, are more in hotness and it’s vice versa. And the organs …
Published in Journal of AYUSH: Ayurveda, Yoga, Unani, Siddha and Homeopathy · Vol. 8, Issue 3, 2019 · pp. 13–20 Read article
-
Experimental Investigation of Combine Effect of Welding Speed, Tool Pin Profiles and Preheat Temperature on Mechanical Properties of Friction Stir Welded AA6061-T6 Joint based on Response Surface Methodology
Abstract: Two similar of dissimilar material can be joined by Friction stir welding (FSW) in solid state. Friction stir welded joint can be made by using non-consumable tool with rotary and transverse motion with intimate contact to material to be welded. These experimental investigations was carried out by taking different FSW parameters tool rotation speed, tool travel speed, tool pin profile and preheat temperature to find out its effect on mechanical …
Published in Trends in Machine design · Vol. 4, Issue 2, 2017 · pp. 15–24 Read article
-
THERMODYNAMIC SIMULATION OF PERFORMANCE OF ATKINSON CYCLE WITH VARIATION OF CYCLE PEAK TEMPERATURE & SPECIFIC HEAT RATIO OF WORKING FLUID
Abstract: Thermodynamic analysis of an ideal air-standard Atkinson cycle with variable specific heat is presented in this paper. The paper outlines the effect of specific heat of working fluid and peak temperature of the cycle on the performance of the cycle efficiency and work output. It showed significant effect on the performance of the cycle over the constant specific heat model. The results obtained from this work can be helpful in …
Published in Trends in Mechanical Engineering & Technology · Vol. 1, Issue 1, 2011 · pp. 22–27 Read article