Search
526 articles for “metal”
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Improvements in Analog Performance of Dual Metal Gate based Silicon-on-Insulator Junctionless Transistor with Pocket Doped Window
Abstract: This paper elucidates the impact of the pocket doped window on the analog performance of dual metal gate based silicon-on-insulator junctionless transistor (DMG SOIJLT). The analog parameters of the proposed SOIJLT are compared with DMG based conventional SOIJLT. The findings of analog performance comparison reveal that transconductance (gm), transconductance generation factor (TGF), output conductance (gd), output resistance (r0), intrinsic gain (AV), and cut-off frequency (fT) have improved for DMG PD-SOIJLT …
Published in Journal of Microelectronics and Solid State Devices Read article
-
Heavy Metal Assessment of Rainwater from Owerri Metropolis and Suburbs of Imo State, Nigeria Using GIS, MATLAB and ANN Models.
Abstract: Three hundred and fifty (350) rainwater samples were collected from 35 select locations within Owerri Metropolis, Ehime Mbano and Mbaitoli LGAs and analyzed for Cd, Cu, Fe, Zn, and Pb using standard instrumental methods. The results were compared with the World Health Organization (WHO), National Ambient Air Quality Standards (NAAQS), Federal Environmental Protection Agency (FEPA) and National Agency for Food and Drug Administration and Control (NAFDAC) Standards for drinking water …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 1, 2024 · pp. 38–57 Read article
-
Developing an AI-Based Novel Forecasting Framework for Surface Irregularity in Metal Matrix Materials
Abstract: Surface irregularity in metal matrix materials (MMM) signifies the deviations from smoothness, influencing structural integrity and performance frequently arising from the manufacturing process along with intrinsic material characteristics that influence effectiveness. Limitations in data, model interpretability and complexity are the difficulties that impede artificial intelligence (AI) based surface irregularity in MMM. In this study, we suggested a novel framework of Gaussian regression fused multi-strategy adaptive boosting classifier (GR-MABC) for the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 48–56 Read article
-
Selected Heavy Metals Levels (Cu, Cr, Cd, Pb, Fe) in Gwadabawa Lake, Sokoto State, Nigeria
Abstract: The main aim of this work was to determine the concentrations of some heavy metals, specifically Cu, Cd, Pb, Cr and Fe in Gwadabawa lake, Gwadabawa Local Government, Sokoto State using standard methods (atomic absorption spectroscopy) and materials of analytical grade. The results were analyzed. The range of Fe concentration was 0.01 ± 0.001 to 1.37 ± 0.3(ppm), and range of Cu concentration determined was 0.00 to 0.02±0.008(ppm). The range …
Published in International Journal of Minerals · Vol. 1, Issue 1, 2024 · pp. 8–15 Read article
-
Concentrated Solar Energy in Iron Production: Towards Zero-Carbon Metallurgy
Abstract: Given the importance of environmental protection in modern societies, one of the objectives of industrial strategies in general and the metallurgical industries in particular is to find new, ecologically acceptable energy sources. One of these energy sources is solar energy, which, when properly concentrated, has a lot of promise for high temperature applications like those needed in metallurgical operations. In this work, we suggest using focused sun energy to make …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 01–10 Read article
-
Au@Sio2@PVP-DCMD Membranes: A Breakthrough in Heavy Metal Removal and Antibacterial Defense
Abstract: This study investigates the development and characterization of multifunctional gold-doped silica (Au@SiO₂) membranes for water distillation and antibacterial applications. The manufacturing process integrated gold nanoparticles into silica matrices using sol-gel techniques. Structural analysis was conducted using SEM (showing uniform pore distribution with an average pore size of 40-50 nm), FTIR (confirming Si-O-Si and Si-Au-Si bonding peaks at 525 cm⁻¹ and 1310 cm⁻¹ respectively), EDX (revealing gold nanoparticle content of 1.5 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 13–27 Read article
-
The Impact of Plastic Pollution on Terrestrial Ecosystems: Microplastics, Heavy Metals, and Quorum Sensing in Soil Health
Abstract: Plastic pollution is one of the most significant environmental challenges today, particularly in the context of terrestrial ecosystems. The widespread accumulation of plastic waste, including microplastics, has led to pervasive contamination of soil, disrupting ecosystems and human health. This article explores the interactions between plastic pollutants and the terrestrial environment, with a focus on soil pollution, microplastic behavior, and the implications for ecosystems. Microplastics, which are tiny plastic particles with …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 2, Issue 2, 2024 · pp. 10–13 Read article
-
Fabrication and Analysis of Al 7075 Based Metal Matrix Composites - A Review
Abstract: Aluminium 7075 alloys are extensively used in aerospace, marine, aviation, and automotive industries due to their superior mechanical properties, high strength-to-weight ratio, and low density. However, to further enhance their performance, aluminium-7075 metal matrix composites (AMMCs) are developed by incorporating various reinforcements. This paper focuses on the influence of reinforcements on the mechanical, tribological, and corrosion behavior of AMMCs. The study examines fabrication techniques, particularly the stir casting method, which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–12 Read article
-
Advancements In Al6061 Metal Matrix Composites: The Role of SiC, Al₂O₃, and Graphite Reinforcements in Enhancing Properties and Applications
Abstract: Al6061-based metal matrix composites (MMCs) reinforced with silicon carbide (SiC), graphite (Gr), and aluminum oxide (Al₂O₃) exhibit a unique combination of mechanical, thermal, and tribological properties, making them highly suitable for advanced engineering applications. SiC enhances hardness, wear resistance, and load-bearing capacity, while Al₂O₃ improves thermal stability and mechanical strength. Graphite provides self-lubricating properties, reduces friction, and lowers the composite's density, improving fatigue resistance. The synergy of combining these reinforcements …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 90–98 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Wear Behavior and Mechanical Characterization of Pure Aluminum Reinforced with RHA by Using Powder Metallurgy Method
Abstract: In recent years, composites made from aluminum and its alloys have gained significant attention due to their optimal blend of low weight, high strength, impressive toughness, enhanced thermal stability, straightforward casting processes, superior corrosion resistance, and availability compared to unreinforced aluminum and its alloys. These aluminum-based composites are widely utilized in producing components for industries such as automotive, aerospace, marine, and nuclear. Rice husk ash (RHA) is a fine, powdery …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 495–502 Read article
-
Magnetic Metal–Polymer Composites with Ferromagnetic Particle Networks for EMI Shielding in Flexible Electronics
Abstract: The rapid expansion of flexible and wearable electronic systems has intensified the demand for lightweight, mechanically compliant materials capable of effective electromagnetic interference (EMI) shielding. In this study, magnetic metal–polymer composites with magnetically aligned ferromagnetic particle networks were developed and systematically investigated for EMI shielding in flexible electronics. Thermoplastic polyurethane (TPU) was employed as an elastomeric polymer matrix due to its excellent flexibility, dielectric characteristics, and compatibility with particulate fillers. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 25–39 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Crack Propagation Analysis in Metallic Alloys: A Comparative Study of Traditional and Advanced Materials
Abstract: A vital component of materials science and engineering, crack propagation analysis is essential to determining the structural integrity and dependability of materials. Designing safe and long-lasting structures for a variety of sectors required an understanding of how cracks begin, spread, and interact with a material's microstructure. To guarantee the performance, safety, and dependability of materials in a variety of applications, crack propagation analysis is essential. It offers insightful information about …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 33–41 Read article
-
Utilizing Chemical Machining Methods in the Metalworking Sector
Abstract: Chemical machining is a kind of material removal technique used to produce desired shapes and dimensions by selectively or completely removing material through carefully regulated chemical attack using etchant solutions, which are solutions of acids or alkalis. One type of chemical machining is chemical milling, also known as contour machining, etching, or chemiluminescence. The aerospace industry uses chemical milling to remove thin layers of material from extruded parts for aircraft …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 17–23 Read article
-
Catalytic Degradation of Polymers Using Metal Oxides (Zno, Cuo): A Sustainable Approach
Abstract: The growing accumulation of synthetic polymeric waste, especially plastics, has become one of the most pressing environmental challenges due to their non-biodegradable nature and long-lasting presence in ecosystems. This issue is compounded by the widespread use of plastic materials in various industries, resulting in vast amounts of plastic waste that contribute to environmental pollution, clog waterways, and pose threats to wildlife. As global plastic production continues to rise, the need …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1052–1062 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article