Search
81 articles for “fin thickness”
-
Machine Learning Optimization for VARTM Carbon Polymer Laminates
Abstract: Vacuum-assisted resin transfer moulding (VARTM) is a key low-cost, out-of-autoclave process for manufacturing large-scale carbon-fibre reinforced polymer (CFRP) laminates crucial to aerospace wings, wind-turbine blades, marine hulls, and automotive structures. Unpredictable resin flow often leads to voids, dry spots, and race-tracking defects, resulting in 27.9% scrap rates and lengthy, costly trial-and-error design cycles. Although surrogate models provide rapid impregnation predictions for simple flat-plate geometries, vision-based monitoring is limited to idealized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–245 Read article
-
Utilizing Chemical Machining Methods in the Metalworking Sector
Abstract: Chemical machining is a kind of material removal technique used to produce desired shapes and dimensions by selectively or completely removing material through carefully regulated chemical attack using etchant solutions, which are solutions of acids or alkalis. One type of chemical machining is chemical milling, also known as contour machining, etching, or chemiluminescence. The aerospace industry uses chemical milling to remove thin layers of material from extruded parts for aircraft …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 17–23 Read article
-
Analysis aspects of pressure tank: A review
Abstract: This review paper presents a detailed analysis of pressure vessels, focusing on finite element analysis (FEA) to evaluate structural integrity. Pressure vessels are widely used in industries such as chemical processing, power plants, and oil refineries, where they are subjected to extreme temperature and pressure conditions. Ensuring their safe and efficient operation requires a thorough understanding of stress distribution, deformation characteristics, and failure mechanisms. This study reviews existing research on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 49–55 Read article
-
Process Parameters Optimization of Fiber Laser Cladded SS316 Surface Using RSM Analysis
Abstract: This paper presents the laser cladding experiments on the surface of SS316 to study the variations in process parameters, such as scanning speed (100-250 mm/min), laser power (50-250 W), and % volume of B4C (5- 25%) + SS316 powder on the mechanical, metallurgical and tribological performance of the modified surface. A central composite design (CCD) was used to develop the response surface methodology (RSM) to design the experiments and for …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 186–201 Read article
-
Hydrodynamic Analysis of Symmetrical Naca Airfoils: A CFD Simulation Approach
Abstract: This study presents a comprehensive numerical investigation of the hydrodynamic characteristics of selected NACA airfoil profiles using advanced computational fluid dynamics (CFD) simulations performed in ANSYS Fluent. The primary objective is to evaluate the fluid–structure interaction behavior of these airfoils when subjected to marine flow conditions relevant to offshore and submerged engineering applications. By modeling the interaction between incompressible fluid flow and various NACA geometries, the study systematically analyzes key …
Published in Journal of Offshore Structure and Technology · Vol. 13, Issue 1, 2026 · pp. 31–38 Read article
-
Heat Transfer Analysis Between Two Aluminium Parallel Plates With Natural Convection
Abstract: As a type of energy, heat can be transferred from heated systems using the natural convection heat transfer method, which has several uses in different industries. Natural convection method of heat conveyance is suitable in many cases due to absent of any external sources like fan. The transfer of this kind of energy can be listed as electrical and electronics equipment, nuclear reactors, domestic convection, dry cooling towers, thermo siphons, …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 26–34 Read article
-
A Mini Review of Synthesis and Applications of Functionally Graded Materials
Abstract: Material composition or microstructure varies gradually along the thickness over a specific volume in functionally graded material (FGM) that results in spatial change in properties like thermal conductivity, strength, stiffness, electrical, magnetic, and light properties, etc. Application of the concept of FGM leads to a single product that has multiple properties in it as demanded by the operational or functional requirements of the product under service conditions. It also allows …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 54–65 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Design and Simulation of Forging Die Towards Improving Life of Closed Die
Abstract: Forging is the metal forming process which is used for forming complex shaped component with geometrical accuracy. More than fifty percent of the forgings are processed through this way. Forged components required in many engineering sectors, most of them in the automotive sector. The majority of the safety critical component and load bearing structural components are process through it. By using forging process production of complex component is faster with …
Published in Journal of VLSI Design Tools and Technology Read article
-
Physico-Mechanical Behavior of Euphorbia Abysinica and Wood Chips Composite
Abstract: In this study, we prepared composite test specimens from Eucalyptus chip particles of sizes 0.5 mm, 1 mm, and 2 mm combined with Euphorbia-Abyssinica fluid at an 80:20 mass ratio. We produced the particleboard under a compression load of 150 KN and kept it in the compression machine for thirty minutes inside the mold. After removing it from the machine, we secured it with C-clamps for twenty-four hours. We covered …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Drilling Fluid Characterization (Filtration Test)
Abstract: This report explores the formulation and testing of a water-based drilling mud used in drilling operations, where fluid circulates through the drillstring and returns to the surface. The study mixes 315 ml of water with 35 ml of corn oil to create the drilling mud and investigates the role of barite in increasing mud density to maintain a hydrostatic pressure capable of managing formation pressure. The findings reveal that increasing …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 17–26 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Activating agents control the morphology of activated carbon materials from biomass
Abstract: The stems of the plant Calotropis gigantea (Cg) were were used as a feedstock for the activated carbon material. Carbonate (K 2 CO 3 ) and oxalate (Na 2 C 2 O 4 ) were used as chemical activating agents. The morphological features of the activated carbon materials were characterized using FEG-SEM. The morphology of the activated carbon materials is found to depend on the type of activating agent used. …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 27–38 Read article
-
Analysis of Bamboo Strength for Structural Material
Abstract: Bamboo is a environmentally accessible available organic plant and among the plants with the quickest growth on earth. It grows up to 60 cm (approx.) a day and it can reach it`s maturity in about four years. It is present in large number of quantities in India. India is of the large producer of bamboo and in every part of India bamboo is easily available. Bamboo has very wide range …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 66–71 Read article
-
Experimental Investigation of Aluminum Alloy 8010 by Friction Stir Welding
Abstract: A solid state welding method called friction stir welding (FSW) is used to fuse metals and alloys that are challenging to fuse using traditional fusion welding. The effects of tool pin and shoulder diameter on joining the aluminum alloy Al 8010 were examined in this study. The basis material for combining single butt-welded joints is a plate with a thickness of 6 mm. The welding was carried out on the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 14–19 Read article
-
Structures and sensors of Polymer Optical Fibers for Last Mile Networks
Abstract: Originating from distinct concepts for transferring information, sensing, or lighting efficiency, fiber characteristics vary greatly throughout their range. A substantial bandwidth-length product with acceptable attenuation characteristics is required for effective transfer of information. Since sensor fibers are typically used over short distances having considerably lower attenuation prerequisites. This paper presents polymer optical fiber (POFs) structures that are used as sensors over conventional fiber optics.An even broader spectrum of optical characteristics …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 166–172 Read article
-
Role Of Autologous Platelet-Rich Plasma (APRP) In Take of Graft
Abstract: Autologous platelet-rich plasma (APRP) has gained attention as a promising adjunct in skin grafting procedures, particularly in enhancing the take and healing of grafts in burn patients. This study focuses on the application of APRP to improve the adherence of split-thickness skin grafts (STSG) in a pediatric patient with scald burns. APRP is prepared by concentrating the patient’s platelets from a small volume of blood, which is rich in growth …
Published in Research and Reviews : Journal of Surgery · Vol. 14, Issue 1, 2025 · pp. 1–5 Read article
-
A Case Study of Demographic Profile of Tribals in Gondia District
Abstract: The Tribals for centuries lived in segregation and had constrained contact with other social orders. Social Researchers have examined broadly the Social, Social and Financial life of the Tribals. But small endeavor has been made to consider the tribals statistic circumstance. In later a long time in any case there's a developing stretch on considering population by locales, ethnic groups. Such studies will no doubt help the academicians and the …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 14, Issue 3, 2025 · pp. 24–31 Read article
-
Autonomous Agentic AI for Adaptive Cure Optimization and Defect Prevention in Thermoset Polymer Composite Manufacturing
Abstract: Thermoset polymer composites occupy a central position in modern structural manufacturing, from aircraft fuselages to wind-turbine blades. Despite progress in resin chemistry and fiber architecture, the “cure process” that transforms compliant preforms into load-bearing structures remains difficult to manage. Manufacturers encounter ‘voids’, “interlaminar delaminations”, and “spring-back distortion” when curing complex or thick-section parts. The cause is not ignorance of the relevant physics, but rather that ‘temperature’, ‘chemistry’, ‘rheology’, and ‘mechanics’ …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 301–320 Read article
-
Machine Learning Assisted Optimization of Nanoscale MOSFET Parameters Using TCAD Simulation
Abstract: This paper presents a machine learning (ML) assisted framework for the multi-objective optimization of nanoscale bulk n-channel metal-oxide-semiconductor field-effect transistors (nMOSFETs) with a 10 nm physical gate length, high-k HfO₂ gate dielectric, and TiN metal gate. Technology computer-aided design (TCAD) simulations employing drift-diffusion transport, Shockley-Read-Hall recombination, Lombardi mobility degradation, and density- gradient quantum correction models are used to generate a parametric dataset of 2,400 device configurations spanning gate length (L), …
Published in Journal of Microelectronics and Solid State Devices · Vol. 13, Issue 1, 2026 · pp. 10–19 Read article