Search
79 articles for “filler-matrix”
-
Recycling and Reinforcement of Retired EV Battery Materials in Polymer Composites for Sustainable Engineering Applications
Abstract: The rapid proliferation of electric vehicles (EVs) has led to a substantial increase in lithium-ion battery waste, necessitating sustainable strategies for material recovery and reuse. This review explores the valorization of retired Electrical Vehicle batteries within polymer and composite systems, highlighting second-life applications as a promising pathway toward circular material utilization. Batteries retaining 70–80% of their original capacity remain suitable for extended use; however, beyond conventional energy storage, their constituent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 362–371 Read article
-
Graphene-Derived Reinforced Polymer Composites for Self-Healing and Durability Enhancement in Concrete Structures
Abstract: This study presents a matrix-centric polymer-composite repair binder: an epoxy–polyamide network reinforced with graphene derivatives (GO/rGO, 0.1–1.0 wt%). The polymer drives function via segmental mobility that closes microcracks, while 2D-filler topology densifies the interphase, improves load transfer, and enforces tortuous moisture pathways. Adhesion was high: pull-off (ASTM D4541) reached 13.5 MPa at 2.0 mm displacement; slant-shear (ASTM C882) reached 12.1 MPa at 2.8 mm, with greater deformation capacity (zero stress …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 77–91 Read article
-
Multifunctional Materials for Electro-Mechanical Applications: Synergistic Integration of Strength and Conductivity
Abstract: The integration of mechanical strength and electrical conductivity within a single material system has emerged as a critical requirement in the development of next-generation multifunctional materials. These materials are increasingly sought after in fields such as aerospace, flexible electronics, energy storage, and structural health monitoring, where the traditional separation of structural and functional materials leads to inefficiencies in weight, space, and overall performance. The convergence of these properties enables compact …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 1–6 Read article
-
Development and Characterization of Rubber Composites using E-Waste Residue as Functional Filler
Abstract: In the present study, residue generated during the recycling of end-of-life printed circuit boards (PCBs) was utilized as a functional filler in natural rubber to fabricate eco-friendly composites using mixing and molding techniques. Chemical analysis of the residue revealed the presence of several metals, including copper, iron, lead, tin, and zinc. The presence of these metals highlights the need for proper recycling and safe management of PCB residues, as their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 512–523 Read article
-
Potential Applications of Ceramic Matrix Composites: Advancements, Benefits and Challenges
Abstract: Ceramic Matrix Composites (CMCs) are materials that mix or fuse ceramic fibres with a ceramic matrix to synthesize a composite/compound. CMCs may be manufactured from a range of ceramic materials, including carbon, carbon fibers, silicon carbide, glass ceramic, alumina, etc. The CMC’s final qualities are determined by its production method and the type of filler employed. Recent breakthroughs in CMC technology have resulted in considerable performance gains, making them suitable …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–107 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Electroactive Graphene–Polymer Nanocomposites for Self-Sustaining and Multifunctional Flexible Devices
Abstract: Graphene–reinforced polymer–composites were developed and systematically investigated to explore their multifunctionality in flexible electronic applications. The study specifically aims to correlate graphene-induced structure–property–function relationships with electroactive performance and self-sustaining behaviour in flexible devices. The hybridization of electroactive polymers—polyaniline (PANI), poly(3,4-ethylenedioxythiophene): polystyrene sulphonate (PEDOT:PSS), and polyvinylidene fluoride (PVDF)—with graphene nanoplatelets enabled simultaneous enhancement of electroactivity, energy-harvesting, and sensing functionalities. Morphological studies confirmed uniform graphene dispersion at 5 wt.% loading, forming continuous …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 260–271 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Mechanical Properties, Viscoelastic and Water Absorption Properties of Biocarbon-Reinforced Composites
Abstract: Biocarbon-reinforced polymer composites have emerged as a sustainable alternative to conventional composites, combining environmental benefits with promising material properties. This study explores the effect of varying biocarbon content (0%, 10%, 20%, and 30% by weight) on the mechanical, viscoelastic, and water absorption properties of a polypropylene (PP) matrix. Tensile strength tests reveal that incorporating 10% biocarbon yields the highest strength at 35 MPa, attributed to enhanced interfacial bonding. However, at …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 145–157 Read article
-
Comparative Analysis of Tensile Properties of Virgin and Rice Husk-Reinforced PLA and ABS Filaments
Abstract: This study focuses on evaluating the tensile behavior of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) filaments reinforced with rice husk ash (RHA) particles, in comparison with their respective virgin counterparts. The incorporation of RHA, an abundant agricultural waste by-product, was considered with the objective of developing eco-friendly composites suitable for additive manufacturing applications. Tensile testing was carried out to assess the influence of the reinforcement on the mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 224–229 Read article
-
Smart Biopolymer–PCM Composite Modules with Embedded Wireless Thermal Sensing for Autonomous Energy Storage Applications
Abstract: The development of multifunctional polymer composite systems for intelligent thermal energy storage has gained significant attention due to the increasing demand for sustainable and autonomous thermal management technologies. In the present study, a wireless-integrated biopolymer–phase change material (PCM) composite module embedded with thermal feedback sensors was successfully fabricated and experimentally investigated for advanced thermal energy storage applications. Polylactic acid (PLA) was employed as the biodegradable polymer matrix, while paraffin wax …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 193–205 Read article
-
In Vivo Biocompatibility and Interfacial Stability of Thermoplastic Polyurethanes and Nanofilled Resin Composites: A Bioanalytical Study of Polymer-Host Interactions Under Dynamic Loading
Abstract: The widespread application of thermoplastic polyurethanes (TPU) and nanofilled resin composites in biomedical devices requires rigorous assessment of their biocompatibility under mechanical stress. While nanofilled composites utilize filler particles (<100 nm) to enhance surface properties and wear resistance, the biological response to these materials in a hydrolytic, enzymatic environment remains a critical area of investigation. Objective: To analyze the in vivo bio-molecular response at the interface of TPU aligners and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1112–1119 Read article
-
A Review on Properties of Natural Fiber Reinforced Composite Materials for Automotive Application
Abstract: The use of composite polymer matrix materials is growing rapidly in automotive, marine and aerospace applications due to their light weight and recyclable properties. In the automotive industry, the use of polymer matrix for interior panels, trims, exterior panels and fender assemblies is rapidly increasing in the 21st century. It also stimulates the use of polymer compounds reinforced by natural fibers. Natural fiber polymer composites are a growing industry due …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 915–922 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Preparation and Characterization of PVA-MgO Nanocomposite Films
Abstract: In this work, Magnesium Oxide Nanoparticles (MgO NPs) doped with 3 g of polyvinyl alcohol (PVA) at different weight percentages (0, 2, 4, 6, and 8 wt.%) using the solvent casting method, to fabricate thin PVA-MgO nanocomposite (NC) films. These films were characterized by (i) XRD, SEM, EDX, DLS, and Zeta Potential for morphological studies, (ii) FTIR spectra and UV-Visible techniques for spectroscopic studies and (iii) DSC for thermal studies. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 40–62 Read article