Search
93 articles for “fibre reinforcement”
-
Additive Manufacturing of Polymer-Based Advanced Composites: Mechanical Properties and Performance Evaluation
Abstract: Fabrication of large-scale and geometrically complex polymer-based advanced composites via fused deposition modelling (FDM) has been shown to be a promising technology for the production of such materials, however there are challenges in using short carbon fibre-reinforced polylactic acid (CF-PLA) which include obtaining high mechanical performance and maintaining dimensional accuracy with dynamic robot motion and complex interactions occurring between process parameters. The conventional approaches are mostly static feed rates or …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1335 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Effect of hybridization on mechanical Characteristics of hemp,bamboo and jute reinforced epoxy bio composites
Abstract: In the present study, hemp, jute and bamboo fibres have been reinforced with epoxy resin to develop several bio-composites (hemp/epoxy, jute/epoxy, bamboo/epoxy, hemp/jute/epoxy, hemp, bamboo, epoxy and hemp/jute/bamboo/epoxy). Their mechanical characteristics (impact strength, flexural strength, and tensile strength) have been evaluated by conducting standardized ASTM tests on the fabricated bio-composite specimens. Among these, the hybrid epoxy composite reinforced with hemp, jute, and bamboo fibers has exhibited superior tensile and impact …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 81–91 Read article
-
Use of Geopolymer Composites for Controlling Structural Cracks
Abstract: A building’s safety and stability can be compromised by ignoring the potential structural issues indicated by occurring cracks in buildings. Extensive damage may cause over the period from unidentified cracks.Good quality concrete never cracks in normal service conditions unless high horizontal force is applied. Through the cracks, carbon dioxide is released into the concrete and speeds up carbonation throughout the cracks, thus reducing the structure usage. The materials which are …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 172–184 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Effect of Silicon Carbide Filler on Mechanical and Damping Behavior of Basalt/Stainless Steel Hybrid Laminated Composites
Abstract: This study consolidates three experimental investigations on hybrid laminated composites reinforced with basalt fibre, stainless steel (SS) wire mesh, and silicon carbide (SiC) filler using vacuum infusion moulding. Three laminates were fabricated with filler variations of 0%, 1.5%, and 3% by weight of matrix material, maintaining a stacking sequence of [0B/0W/45B/0W/0B/45W]s with a thickness of 4–5 mm. The first investigation focused on impact strength. Drop-weight impact testing revealed a steady …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Evaluation of Impact Strength and Hardness for Polymer Matrix Composites with Steel, Carbon and Glass Reinforcements for Automotive Applications
Abstract: Polymer matrix composites (PMCs) play a crucial role in a wide range of engineering submissions, owing to their impressive strength-to-weight ratio and customizable mechanical properties. This research focuses on examining how PMCs, enhanced with different materials, specifically carbon fibres, glass fibres, and steel fibres, behave when subjected to dynamic and static loading conditions. The study involves creating three distinct types of PMC specimens, each reinforced with one of the mentioned …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 738–748 Read article
-
Recyclable Vitrimer-Matrix Carbon Fibre Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Problems and Difficulties in the Additive Manufacturing of Composites with Carbon Fiber Reinforcement for Medical Application
Abstract: Amputation is more prevalent than one may think due to an accident, war, or disease. Prosthetics and associated orthotics have a combined global market value of $2.8 billion. Carbon fibre has found a market due to increased demand for foot prostheses. Fused deposition modeling (FDM) is a rapidly advancing three-dimensional (3D) printing technique. PEEK (polyether-ether-ketone) is a biocompatible, high-performance polymer that could potentially be utilised as an orthopedic surgery implant …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 1, Issue 1, 2023 · pp. 8–12 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article
-
Utilization of Recron Fibers for Improving Subgrade Stability of Expansive Soils
Abstract: The major interest in the utilization of synthetic fibers is used as reinforcing material for developing reinforcing effect into the entire soil composition laid bellow the structures whare as construction works are going on. Various articles are published on soil reinforcement, yet some of them fibers used are prepared by using with synthetic materials, one type of synthetic fibers were Recron fiber it is used as a reinforcing element to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 170–178 Read article
-
Tribological Behaviour of PTFE based Composite Materials with Different Filler Materials: A Combine Numerical and Experimental Approach
Abstract: This study investigates the tribological behaviour of Polytetrafluoroethylene (PTFE) composites reinforced with various fillers, utilizing the Archard wear model to analyse wear mechanisms and predict wear rates. PTFE is widely recognized for its excellent chemical resistance and low friction, but its inherent wear resistance is relatively poor. To enhance its tribological properties, fillers such as glass fibres, carbon fibres, bronze, and graphite were incorporated into the PTFE matrix. In the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 547–557 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites
Abstract: The rate at which non-renewable resources are consumed increases, the research of using eco-friendly and sustainable materials has been in the spotlight lately. The companies from different industries are trying to find replacements for traditional synthetic materials to limit their environmental impact and promote sustainable eco-friendly initiatives. One such approach is the usage of natural fiber polymer composites as it provides a biodegradable and renewable structural alternative over traditional synthetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–11 Read article
-
Evaluation of Mechanical Properties of Arecanut Fiber Reinforced Epoxy Composite
Abstract: This study investigates the mechanical performance of arecanut fiber-reinforced epoxy composites, aiming to evaluate their potential for sustainable industrial applications. Arecanut husk fibers, an agricultural waste product, were selected for their natural abundance and biodegradability. To enhance fiber-matrix bonding, the fibers were chemically treated with sodium hydroxide (NaOH), which effectively removes lignin, hemicellulose, and other impurities, improving surface roughness and interfacial adhesion. The treated fibers were then incorporated into an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 389–400 Read article
-
An Overview of Natural Fibers and Fillers Reinforced Polymer Composite Materials
Abstract: Polymer composite materials reinforced with natural fibers and fillers are drawing wide spread attention due to their sustainability, eco-friendliness, and a replacement of conventional synthetic composites. Such materials combine strength and stiffness of natural fibers like jute, hemp, flax, and sisal with flexibility and durability of polymer matrices, including thermoplastics, and thermosets. The paper reviews some developments, properties, and applications of natural fiber-reinforced polymer composites (NFRPCs), focusing on their merits, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 78–92 Read article