Search
286 articles for “conducting polymer”
-
Smart Biopolymer–PCM Composite Modules with Embedded Wireless Thermal Sensing for Autonomous Energy Storage Applications
Abstract: The development of multifunctional polymer composite systems for intelligent thermal energy storage has gained significant attention due to the increasing demand for sustainable and autonomous thermal management technologies. In the present study, a wireless-integrated biopolymer–phase change material (PCM) composite module embedded with thermal feedback sensors was successfully fabricated and experimentally investigated for advanced thermal energy storage applications. Polylactic acid (PLA) was employed as the biodegradable polymer matrix, while paraffin wax …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 193–205 Read article
-
Tactile Sensing Technologies in Robotics: A Review of Sensors, Materials, and Applications
Abstract: Tactile sensing, which closely resembles the human sense of touch, is an essential capability in modern robotics. It enables robots to detect and interpret physical interactions with objects, surfaces, and living beings, thereby allowing them to operate more intelligently and adaptively in complex environments. Unlike visual or auditory sensors, tactile sensors provide direct feedback about contact, pressure, texture, force, temperature, and even vibration. These sensory cues are vital for improving …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 3, Issue 1, 2025 · pp. 17–23 Read article
-
Dielectric Polymer Based Tunable Bandpass Filter for RF MEMS Applications
Abstract: In this paper, we report on the design, modeling, and analysis of a tunable bandpass filter implemented in a coplanar waveguide (CPW) configuration, where a distributed MEMS transmission line (DMTL) is integrated with dielectric polymer layers to achieve dynamic frequency and bandwidth reconfigurability. The proposed filter architecture leverages the tunable dielectric response of polymer films, enabling precise control of the center frequency and passband width under applied electrostatic bias. Comprehensive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1449–1470 Read article
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 859–873 Read article
-
A High-Efficiency Fuzzy-Logic-Controlled Wireless Charger Enabling the Safe Integration of Electronics in Carbon Fiber Reinforced Polymer E-Bikes
Abstract: The integration of advanced electronics into structures made from carbon fiber reinforced polymers (CFRP) presents significant challenges, including thermal management constraints, electromagnetic interference (EMI), and the imperative for lightweight components. This study addresses these challenges by designing and validating a fuzzy logic-based wireless charging system specifically engineered for lightweight E-Bikes employing CFRP frames. The system mitigates thermal risks associated with the low thermal conductivity of polymer composites by implementing a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1159–1172 Read article
-
Polymer Composite Phase Change Materials: Materials Design, Processing, Characterization, and Structure–Property Relationships—A Comprehensive Review
Abstract: Polymer composite phase change materials (PCPCMs) have been recognized as an innovative category of multifunctional polymeric materials, which could be tuned by appropriate materials design, composite formation, and interface modification. With the incorporation of phase change materials in polymer matrix systems and functional fillers, PCPCMs show improved mechanical properties, physicochemical stability, and functionality in contrast to traditional phase change materials. With recent advances in polymer science, nanocomposites, and processing techniques, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Fabrication of Polydimethylsiloxane Composites with Nickel Nanoparticles: Unification and Current–Voltage Relationship
Abstract: Polydimethylsiloxane (PDMS)–nickel nanoparticle (NiNPs) nanocomposite films were fabricated and systematically investigated to understand their electrical transport behavior through current–voltage (I–V) characterization. Nanocomposite films with varying Ni nanoparticle filler concentrations (14.88 wt%, 15.77 wt%, and 16.65 wt%) were prepared using a solution-mixing and spin-coating technique, followed by controlled thermal curing. The electrical properties of both pristine PDMS and PDMS– NiNPs nanocomposites were examined over a wide voltage range (up to 800 …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 22–29 Read article
-
Electrical Conductivity and Antibacterial Studies on Chemically Synthesized Poly (2-Methyl Aniline-co-2-Chloro Aniline)-Blend-Polyurethane
Abstract: AbstractElectrically conducting copolymer blend, poly (2-methyl aniline-co-2-chloro aniline)-blend-polyurethane has been synthesized chemically by oxidative polymerization technique using 0.3 M ammonium persulphate (APS) as oxidant, 0.1 M of the anionic surfactant, sodium lauryl sulphate and 1 M HCl as dopant. The formation of the copolymer blend has been confirmed by comparison with the spectral data obtained for the copolymer which was synthesized under the same conditions and characterized. The copolymer blend …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 7–14 Read article
-
Stretchable Elastomer–PCM Composites with Bluetooth-Enabled Temperature Monitoring for Wearable Healthcare IoT Devices
Abstract: The rapid advancement of wearable healthcare technologies has created a growing demand for multifunctional polymer composites capable of simultaneously providing mechanical flexibility, thermal energy management, electrical conductivity, sensing capability, and wireless communication. In this study, a stretchable elastomer-based polymer composite integrated with a phase-change material and a Bluetooth Low Energy temperature monitoring system was developed for wearable healthcare Internet-of-Things applications. The polymer composite was fabricated using an Ecoflex silicone elastomer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 241–257 Read article
-
Thermo-Hydraulic Enhancement of Annular Finned Shell-and-Tube Heat Exchangers Using Epoxy-Based Polymer Composites: A Material–Geometry Coupled CFD Investigation
Abstract: Shell-and-tube heat exchangers remain a backbone of industrial thermal systems, yet their performance is often limited by relatively low shell-side heat transfer and the weight and cost associated with conventional metallic components. In this context, the integration of polymer composite materials offers a promising pathway toward lightweight, corrosion-resistant, and performance-tunable heat exchanger designs. The present study investigates the thermo-hydraulic performance of a straight-tube shell-and-tube heat exchanger equipped with annular fins, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 669–684 Read article
-
Coupled Magneto–Thermal–Diffusion Transport in an Unsteady Maxwell Polymer Fluid with Activation Energy over a Porous Stretching Surface
Abstract: The present study investigates the combined effects of activation energy and diffusion-thermo (Dufour) processes on unsteady magnetohydrodynamic (MHD) flow, heat, and mass transfer of a Maxwell viscoelastic fluid past a porous exponentially stretching vertical sheet. The electrically conducting and incompressible polymeric fluid flows through a saturated porous medium under a transverse magnetic field. The governing momentum, energy, and concentration equations are transformed into nonlinear ordinary differential equations using similarity transformations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 581–590 Read article
-
Comparison Analysis of Transformer Boosting and Induced Degeneration Topology Design of LNA for Millimeter Wave Frequency Range Using Polymeric Substrates
Abstract: In this study, a comparison between transformer boosting and source degeneration LNA topologies is conducted using two polymeric substrates—Polyimide (PI) and Liquid Crystal Polymer (LCP)—for millimeter-wave (mmWave) applications. With growing interest in flexible and high-frequency electronics, polymeric materials offer unique advantages such as low dielectric constants, mechanical flexibility, and thermal stability. The analysis explores gain, return loss, and noise figure performance while evaluating the influence of dielectric properties on the …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 2, 2025 · pp. 1–24 Read article
-
Unification and DC Conductivity of PDMS/NiNPs Nanocomposite
Abstract: The DC conductivity of nickel nanoparticles–polydimethylsiloxane (NiNPs–PDMS) composite materials has attracted considerable attention due to their promising applications in flexible electronics, sensors, and energy storage devices. The electrical performance of these composites is largely governed by the formation of conductive networks within the insulating polymer matrix. Incorporating nickel nanoparticles into PDMS introduces conductive pathways that significantly enhance DC conductivity once a critical percolation threshold is reached.Several key factors influence the …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 · pp. 28–37 Read article
-
Comparison of 11-Atom Armchair Graphene Nanoribbons and Zig-Zag Carbon Nanotubes in Polymer Composites Under Various Bias Voltages: A Study of Electronic and Transmission Properties
Abstract: In this research, 11-atom zig-zag carbon nanotubes (ZCNTs) and 11-atom armchair graphene nanoribbons (AGNRs) were studied under applied bias voltages at 50, 150, and 300 millivolt levels. The focus was on understanding their behaviour concerning transmission qualities, current-voltage (I-V) characteristics, and energy-momentum (E-K) diagrams. The Non-Equilibrium Green's Function (NEGF) approach was employed to analyse various electronic properties for ZCNTs and AGNRs, including transmission, E-K relationships, and I-V characteristics. The results …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 126–134 Read article
-
Study of Thermal Conductivity and Hardness of Coir Fiber Reinforced Epoxy Composite
Abstract: Researchers are drawn to polymer reinforced natural fibers composite for the development of new materials. The research aims to use waste fibers, specifically coir, to create polymer composite materials. Thermal conductivity and hardness of the composite results are determined under various conditions. Coir fiber is used as the reinforcement material and Coir powder is used as the filler material in the study. In the case of the matrix, the epoxy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1576–1582 Read article
-
Development of Environmentally Friendly Concrete by Incorporating Rubber and Leather Waste
Abstract: The valorization of post-consumer polymeric waste into high-performance composite materials offers a sustainable strategy for advancing circular economy principles and reducing environmental impacts.This study investigates the feasibility of utilizing recycled crumb rubber from end-of-life tires and leather-derived polymeric waste from the footwear industry as sustainable fillers in polymer-modified cementitious composites. Crumb rubber and processed leather waste were incorporated as partial replacements for natural fine aggregate at replacement levels of 0%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 547–563 Read article
-
Polymer-Based Nanocomposites: Synthesis, Properties, and Applications
Abstract: Polymer-based nanocomposites have emerged as a highly promising class of materials, offering enhanced mechanical, thermal, and electrical properties. By incorporating nanoscale fillers such as carbon nanotubes, graphene, and metal oxides into polymer matrices, these composites exhibit superior strength, conductivity, and durability compared to conventional polymer materials. Their tunable properties make them highly versatile, with applications spanning multiple industries, including biomedical engineering, electronics, and automotive manufacturing. The synthesis of polymer nanocomposites …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 222–227 Read article
-
Optimizing MEMS-Based Energy Harvesting with Piezoelectric and Thermoelectric Polymer Composites
Abstract: This research explores the development and performance of polymer-based composites, particularly Polyvinylidene Fluoride (PVDF) and Electro active Polymers (EAPs), in MEMS-based energy harvesting systems. PVDF, a flexible piezoelectric material, is combined with ceramic powders such as lead zirconatetitanate (PZT) to enhance its piezoelectric response while retaining mechanical flexibility. EAPs, including ionic polymer-metal composites (IPMCs) and dielectric elastomers, are investigated for their ability to generate electrical power from mechanical deformations, offering …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 221–237 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Thermal Conductivity and Energy Storage Performance of Paraffin Wax-Based Composites Reinforced with Amine Functionalized Graphene as a Nanofiller
Abstract: In this study, amine-functionalized graphene (AFG) was employed as a nanofiller/nanomaterial to enhance the thermal and structural properties of a paraffin wax (PW)-based polymeric composite, formulated as a phase change material (PCM). The PW/AFG composite was synthesized with varying nanofiller volume fractions (0.20%, 0.40%, 0.80%, and 1.60%), and its thermal conductivity, stability, and energy storage performance were systematically analyzed. The incorporation of AFG into the polymer matrix significantly improved the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–374 Read article