Search
123 articles for “Scanning Electron Microscope (SEM)”
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Influence of Alkali Treatment on the Tensile Properties of The Hybrid Fiber Reinforced Polymer Matrix Composite
Abstract: In this study, the effect of alkali treatment on the tensile strength of the hibiscus fiber, gongura fiber, and treated madar fiber-reinforced Polymer Matrix Composite (PMC) is studied. The Sodium Hydroxide (NaOH) solution is utilized for madar fiber treatment. The traditional hand layup methodology was used for fabrication. The influence of tensile property control variables such as duration of fiber treatment, concentration of NaOH for treatment, and proportion of fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 28–34 Read article
-
Development and Characterization of Antimicrobial Polymer Composites for Food Packaging Applications
Abstract: The increasing demand for sustainable and antimicrobial food packaging materials has led to extensive research in polymer-based composites. This study focuses on developing a polyethylene terephthalate-ethylene vinyl acetate (PET-EVA) composite reinforced with metal oxide nanoparticles (MONs), including Cu₂O, ZnO, and MgO₂. These nanoparticles were selected for their antimicrobial properties and ability to enhance the functional characteristics of the composite. Structural, chemical, mechanical, and barrier properties were extensively evaluated to determine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 86–93 Read article
-
Novel Poly (Methyl Cellulose-G-Acrylamide)/Sodium Alginate Based Zeolite 4A Filled Mixed Matrix Membranes for The Separation of Water-Isopropyl Alcohol Mixtures by Pervaporation
Abstract: The Filled blend matrix membranes of (Methyl Cellulose-g-Acryl amide)/Sodium Alginate {(MC-g-AAm)/NaAlg} prepared via solution casting method by in situ incorporation with 4A zeolite particles in 5, 10 and 15 mass % with respect to the weight of (MC-g-AAm)/NaAlg membrane. Several analytical tools such as scanning electron microscope (SEM), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and thermo-gravimetric analysis (TGA) were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 131–152 Read article
-
Hybrid Polymer Nanocomposites with Enhanced Dielectric and Optical Properties for Wireless Communication Systems
Abstract: The incorporation of nanofillers into polymer matrices offers a promising approach to enhancing the multifunctional properties of composite materials. This study examines the effect of nanofiller concentration on the dielectric performance, mechanical strength, thermal stability, optical absorbance, and electromagnetic interference (EMI) shielding effectiveness of polyvinylidene fluoride (PVDF)-based nanocomposites. Titanium dioxide (TiO₂) and zinc oxide (ZnO) nanofillers were incorporated at varying concentrations to assess their influence on material properties. EMI shielding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 518–549 Read article
-
Electrospun Antibacterial Polymer Composite Scaffolds Incorporating Silver Nanoparticles for Enhanced Wound Healing
Abstract: The present study focuses on the synthesis and characterization of electrospun polycaprolactone (PCL)/chitosan nanofiber scaffolds incorporated with silver nanoparticles (AgNPs) to enhance antibacterial activity and biological performance. Uniform nanofibers with controlled morphology were fabricated using electrospinning, and different AgNP concentrations were introduced to investigate their influence on fiber structure, antimicrobial response, and cellular interactions. Scanning electron microscopy (SEM) revealed that increasing AgNP content resulted in well-distributed fibers with reduced diameters, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1025–1051 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article
-
Utilization of Banana Peel Biopolymer as a Natural Coagulant for Wastewater Treatment: A Sustainable Approach to Bio-Composite Applications
Abstract: This study explores an eco-innovative approach to wastewater treatment by utilizing banana peel powder (BPP) as a sustainable, low-cost bio-coagulant. Although effective, conventional chemical coagulants like aluminum sulfate and synthetic polymers are often non-biodegradable, toxic, and economically burdensome, particularly in decentralized or low-resource settings. In contrast, BPP—an agro-waste material rich in bioactive functional groups such as hydroxyl, carboxyl, and phenolic compounds—provides a renewable and environmentally friendly alternative. To enhance its …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 106–115 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Role of Strontium in Structural and Dielectric characterstics of Barium Titanate
Abstract: Ba₀.₇₅Sr₀.₂₅TiO₃ (BST) compound was synthesized through the conventional solid-state reaction methodology, aimed at investigating its structural, microstructural, and dielectric characteristics. The structural characterization was executed employing X-ray diffraction (XRD), and the resultant diffraction patterns were refined utilizing the Rietveld method, which substantiated the establishment of a single-phase perovskite configuration exhibiting tetragonal symmetry and belonging to the P4mm space group. The refined lattice parameters revealed subtle distortions correlating with the substitution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1157–1163 Read article
-
Revolutionizing Petrology and Mineralogy: The Study of AI and Advanced Sensor Technologies
Abstract: Petrology and mineralogy are fundamental to understanding Earth's intricate processes, from crustal evolution to economic resource formation. However, traditional methods, while precise, are often laborious, time-consuming, and occasionally subject to interpretive bias. This abstract explores the transformative potential of integrating cutting-edge Artificial Intelligence (AI) and advanced sensor technologies to revolutionize data acquisition, analysis, and interpretation in these critical geosciences. Advanced sensor technologies, including high-resolution spectral imaging (hyperspectral, Raman), automated X-ray …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 1–11 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Composite Behavior of Bagasse Ash Stabilized Expansive Soil with Sodium Benzophenone Under Curing Conditions
Abstract: The present investigation examines the development of a hybrid composite using Black Cotton (BC) soil, Bagasse Ash (BA), and Sodium Benzophenone (SBP) as performance-enhancing elements. Different ratios of BA, a silica-rich agro-industrial by-product, were added to improve pozzolanic reactivity and particle size distribution (0%, 6%, and 12%). SBP was added in the range of 0–0.6% as a compatibilizer in order to enhance interfacial adhesion, particle cohesivity and moisture-assisted deterioration resistance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1134–1146 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
A Brief Review on Interfaces of Copper Welded to Different Materials
Abstract: In engineering applications, three metals with high conductivity are primarily used such as copper (Cu), aluminium (Al), and silver (Ag). Each has its unique set of properties that affect specific engineering applications. Infact the choice of conductor depends on a mixture of cost, technical parameters, and environmental conditions. Among these, Copper is widely valued in engineering applications due to its antimicrobial property, excellent electrical (about 100% IACS) and thermal conductivity, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 25–36 Read article