Search
1018 articles for “Metallic”
-
Monitoring the Effectiveness of Water-Based Plants for the Inhibition of Metal
Abstract: The temperature performance profile of the plant extracts shows that inhibition efficiency increased with increasing temperature of the system until at about 323K at 9.00hrs immersion time where a decline in inhibition efficiency occurred implying the opposite at higher temperatures and longer immersion time. Corrosion rate parameters changed with rise in temperature and exposure – immersion time. Plots of rates of corrosion against the volume(s) of the test inhibitor(s) in …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 37–46 Read article
-
Bio-ethanol Production and Heavy Metal Lead (Pb) Removal Using Macro Algae Wolffia
Abstract: This study was aimed to evaluate the potential of using macro algae Wolffia for bio-ethanol production and for heavy metal Lead (Pb) biosorption. Macro algae Wolffia was collected locally from a pond. Pretreatment was given by using 1 and 10% sulphuric acid (H2SO4) to different batches of Wolffia. Fehling’s test was performed to check the presence of sugar. For the fermentation step Saccharomyces cerevisiae strain was used. Yield obtained using …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 23–39 Read article
-
Effect of Ni Addition on the Hardness and Tensile Strength of Al – Cu Alloy Prepared by Powder Metallurgy Technique
Abstract: Aluminium alloys are becoming potential engineering materials offering excellent combination of properties such as high specific strength, high specific stiffness, electrical and thermal conductivities, low coefficient of thermal expansion and wear resistance. Generally, copper and nickel were used as alloying elements in aluminium alloy to increase high temperature strength.Both powder metallurgy as well as casting techniques is used to produce Al-Cu-Ni alloys.However, P/M technique is better suited for preparing this …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 19–23 Read article
-
A Technical Review on Parametric Optimization of Welding Dissimilar Metals
Abstract: As we know that the use of stainless steel in different industrial sectors such as oil and gas, aerospace, automobile, power plant, manufacturing, etc. is high due to their higher tensile strength and toughness etc. Therefore need has arrived to think out in the merger of stainless steel with other metal which are compatible and stronger such as stainless steel. In this paper, we have studied the different technical aspects …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 43–50 Read article
-
Improvements in Analog Performance of Dual Metal Gate based Silicon-on-Insulator Junctionless Transistor with Pocket Doped Window
Abstract: This paper elucidates the impact of pocket doped window on the analog performance of dual metal gate based silicon-on-insulator junctionless transistor (DMG SOIJLT). The analog parameters of proposed SOIJLT is compared with DMG based conventional SOIJLT. The findings of analog performance comparison reveal that transconductance (gm), transconductance generation factor (TGF), output conductance (gd), output resistance (r0), intrinsic gain (AV), and cut-off frequency (fT) have improved for DMG PD-SOIJLT as compared …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 1, 2021 · pp. 1–8 Read article
-
A STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM-4.5%COPPER ALLOY METAL MATRIX COMPOSITES REINFORCED WITH ALUMINA FIBERS USING SQUEEZE CASTING PROCESS
Abstract: Aim of the present investigation is to develop aluminium-4.5% copper alloy metal matrix composites by reinforcing with chopped alumina fibers in varying percentage like 10%, 20% and 30% and so on. The casting can be produced by using Squeeze casting process; these castings were studied for all its mechanical properties like tensile, hardness, wear and microstructure and corrosion analysis. It is observed that increase in reinforcement improves the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 22–31 Read article
-
Microstructure and Mechanical Characterization of AA390 and Si3N4 Metal Matrix Composite Using Severe Plastic Deformation
Abstract: Metal matrix composites (MMCs) have significant attention in recent years due to their potential for improved mechanical properties compared to conventional monolithic materials. This study focuses on the microstructure and mechanical characterization of a MMC comprising AA390 aluminum alloy reinforced with Si3N4 particles. The severe plastic deformation (SPD) process, Equal Channel Angular Pressing (ECAP), was employed to fabricate the composite with enhanced mechanical properties. The ECAP method was chosen as …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 17–30 Read article
-
Metal corrosion prevention control with uses of sol-gel coatings
Abstract: The potential for sol-gel generated films to replace methods for pre-treating metal surfaces with chromate is very high. Metallic and organic paint can be painted on with good adherence thanks to inorganic sol-gel generated coatings. Their significant crack-forming propensity prevents them from offering appropriate corrosion protection. A thicker, more flexible, functionalized film is produced with improved compatibility to various organic top coatings when an organic component is added to an …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 2, 2022 · pp. 22–26 Read article
-
A Preliminary Report on Groundwater Contamination of Majha Belt of Punjab due to Heavy Metal Arsenic
Abstract: Punjab is facing a crisis situation due to high levels of heavy metals in underground water table of Punjab. ICAR has reported arsenic beyond safe limit in 13 districts of Punjab. According to PWSSD report, there are 2748 habitations out of 6884 surveyed in Punjab, which fall under quality affected (QA) category (40% nearly). Out of all QA habitations in Punjab, 60% fall in Majha belt of Punjab, namely, Amritsar, …
Published in Research and Reviews: A Journal of Toxicology · Vol. 7, Issue 3, 2017 · pp. 27–33 Read article
-
Groundwater Contamination of Amritsar District of Punjab due to Heavy Metals Iron and Arsenic and its Mitigation
Abstract: Punjab is facing a crisis situation due to high levels of heavy metals in underground water table of Punjab. ICAR has reported arsenic beyond safe limit in 13 districts of Punjab. According to PWSSD report, the highest number of qualities affected (QA) habitations due to arsenic and iron fall under the geographical area of Amritsar district in Punjab. In this survey, groundwater quality data pertaining to arsenic and iron is …
Published in Research and Reviews: A Journal of Toxicology · Vol. 9, Issue 2, 2019 · pp. 18–27 Read article
-
Groundwater Contamination due to Heavy Metals and other Pollutants in Amritsar District of Punjab
Abstract: Punjab is facing a crisis situation due to high levels of uranium (U) and heavy metals in the underground water table of Punjab. Department of Water Supply and Sanitation (DWSS), Punjab report on water quality monitoring and mitigation presents a deplorable situation about the current water quality scenario in Punjab. Out of a total of 874 habitations covered under this survey, 378 are found to be quality affected due to …
Published in Research and Reviews: A Journal of Toxicology · Vol. 9, Issue 3, 2019 · pp. 19–28 Read article
-
Heavy Metals Contamination of Groundwater in Patiala District of Punjab State, India
Abstract: Punjab is facing a crisis situation due to high levels of uranium (U), especially in Malwa belt, along with heavy metals in underground water table of Punjab in selected districts both in Malwa and Majha belts. Department of Water Supply and Sanitation (DWSS), Punjab report on Water Quality Monitoring and Mitigation presents a deplorable situation about the current water quality scenario in Punjab. Nearly 50% habitations are found to be …
Published in Research and Reviews: A Journal of Toxicology · Vol. 9, Issue 3, 2019 · pp. 34–42 Read article
-
Utilizing Chemical Machining Methods in the Metalworking Sector
Abstract: Chemical machining is a kind of material removal technique used to produce desired shapes and dimensions by selectively or completely removing material through carefully regulated chemical attack using etchant solutions, which are solutions of acids or alkalis. One type of chemical machining is chemical milling, also known as contour machining, etching, or chemiluminescence. The aerospace industry uses chemical milling to remove thin layers of material from extruded parts for aircraft …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 17–23 Read article
-
Production Methods, Mechanical Characteristics, and Industrial Uses for Metal Matrix Composites
Abstract: Advanced light-weight components known as composites from metal matrix are made of an element the alloy matrix with a second phase incorporated and dispersed throughout to improve certain properties. The composite's property varies according to the remaining phase's size, shape, and quantity. Because of its unique combination of ceramic and metallic features, it has better mechanical and physical qualities. These materials belong to a new breed of engineered materials that …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 1–5 Read article
-
Synthesis of YSZ nanopowders by using PVA-metallic nitrate combustion method
Abstract: Yttria-stabilized zirconia (8YSZ) powder is widely used as a thermal barrier coatings material for various aeronautical gas turbine engine components and structures operating in high temperature environment as well as for the nozzle of solid rocket engine due to its relatively high thermal expansion coefficient, thermal reflectivity, low thermal and good corrosion resistance. The synthesis of single or composite metal oxides by combustion of metal-polyvinyl alcohol gel precursors (Me-PVA) has …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 24–32 Read article
-
Enhancing Compressive Strength of M25 Grade Concrete Using Ceramic Tiles Waste and Waste Fiber Metal: A Path Toward Sustainable Construction
Abstract: This study explores the use of Ceramic Tiles Waste and Waste Fiber Metal as partial replacements in M25 grade concrete, focusing on their impact on compressive strength. Various combinations of waste materials were tested to determine the optimal mix proportions. Compressive strength tests were conducted on concrete cubes incorporating 0.30%, 0.40%, and 0.50% Waste Fiber Metal with varying percentages of Ceramic Tiles Waste ranging from 20% to 50%. The results …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 13–19 Read article
-
METAL NANOPARTICLE: SYNTHESIS, PROPERTIES, AND THEIR DERMATOLOGICAL AND COSMETIC IMPACTS
Abstract: Nanoparticles (NPs) are materials with dimensions under 100 nm and various shapes, such as spheres and rods. Their advancement offers transformative potential in medical and healthcare fields. The increased application of NPs across molecular biology, chemistry, medicine, and material science reflects their growing importance. Due to their large surface area, NPs enhance substance delivery through the skin, benefiting cosmetic applications by improving penetration, efficacy, and targeted delivery of active ingredients.With …
Published in Recent Trends in Cosmetics · Vol. 2, Issue 2, 2025 · pp. 1–6 Read article
-
Optimizing Glass to Metal Composite Seal Performance: An integrated Approach with Artificial Neural Network, Multiple Regression, and Taguchi
Abstract: Composite materials, particularly glass to metal composites, are critical components in solar receiver tubes, where vacuum leakage can significantly compromise the efficiency of solar plants. This research addresses the technical barriers associated with the development of durable and high-quality glass to metal composite seals. We investigate the principles that can enhance the physical and chemical properties of these composite seals, focusing on the incorporation of TiO2 and MgO nanoparticles into …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 418–435 Read article
-
Comparative Analysis of Processing-Property Relationships in Metal and Polymer Matrix Composites: A Unified Statistical Framework for Hardness Characterization
Abstract: Composite materials, encompassing both metal matrix composites (MMCs) and polymer matrix composites (PMCs), exhibit complex processing-property relationships that fundamentally govern their mechanical performance across diverse applications. This study presents a unified statistical framework for analyzing hardness characteristics in composite systems, using aluminum-tungsten carbide (Al-WC) metal matrix composites as a representative model system while establishing connections to polymer matrix composite behavior. The investigation employed comprehensive processing parameter optimization, microstructural characterization, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 419–430 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article