Search
148 articles for “MPa”
-
Advanced Functional Nanocomposites: Graphene Oxide Integration into Polyvinyl Alcohol Matrix
Abstract: This research explores how incorporating graphene oxide (GO) into polyvinyl alcohol (PVA) can improve its mechanical and thermal characteristics, with the goal of creating multifunctional nanocomposites suitable for advanced technological applications. GO was introduced into the PVA matrix at 0.5, 1, and 2 wt% via a scalable solution casting method. The resulting nanocomposites were characterized mechanically, thermally, and spectroscopically. Tensile testing revealed a significant improvement in mechanical performance, with tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 50–59 Read article
-
Sustainable Epoxy Composites Enhanced by Cellulose Nanocrystals for Structural and Thermal Applications
Abstract: This study presents the advancement and behaviour analysis of sustainable nanocomposites reinforced with cellulose nanocrystals (CNCs), a biodegradable and high-aspect-ratio nanofiller derived from microcrystalline cellulose. CNCs were incorporated into a bisphenol-A-based epoxy matrix at varying concentrations (0, 1, 3, 5, and 7 wt%) to assess their influence on mechanical, thermal, and viscoelastic properties. The tensile strength of the composites increased significantly, from 45 MPa for neat epoxy to 65 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 126–134 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
Evaluation of Indirect Tensile Strength and Unconfined Compressive Strength of Cement Treated Granular Subbase with Copper Slag
Abstract: This study investigates the mechanical properties of Cement Treated Granular Subbase (CTGSB) with the inclusion of copper slag as a partial replacement material. The research focuses on evaluating the Indirect Tensile Strength (ITS) and Unconfined Compressive Strength (UCS) to assess the material's suitability for road construction. Various mix proportions of copper slag were analyzed to determine their effect on strength development. The results revealed that the ITS increased from 0.79 …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 22–26 Read article
-
Engineering Sustainable Interior Materials: Performance Analysis of PLA Composites Reinforced with Banana Stem Fiber and Spent Coffee Grounds
Abstract: This study presents the development and classification of eco-friendly composite panels reinforced with spent coffee grounds (SCG) and banana stem fibers (BSF) for interior applications. Hybrid composites were fabricated using polylactic acid (PLA) as the matrix with a constant filler loading of 30 wt%, varying BSF:SCG ratios (70:30, 60:40, 50:50). Mechanical testing revealed that the 70:30 composite exhibited the highest tensile strength (42 MPa) and flexural strength (58 MPa), whereas …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 94–105 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
Exploring the Synergy of High Performance Composite Concrete Strength and Sustainable Construction Practice
Abstract: This research evaluates how the combination of industrial waste materials optimizes composite concrete structure strength and services the interests of sustainable construction development. This research examines two major environmental problems stemming from ordinary Portland cement clinker manufacturing and landfill accumulation of non-biodegradable porcelain waste. The research employed alccofine dosage of 16% as a supplementary cementitious material (SCM) with high pozzolanic activity to combat these problems. Processed porcelain waste aggregates filled …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 47–58 Read article
-
Polymer Chemistry in Flexible Dental Assemblies: Designing a Polymer-Based Composite Arm for Bio-Fluid Extraction Tube Support
Abstract: Polymer chemistry offers innovative solutions for designing flexible, durable assemblies in medical applications. This study explores an assembly for holding a bio-fluid extraction tube, featuring a flexible arm interpreted as a polymer composite, aimed at enhancing dental procedures. The assembly comprises a gooseneck-style arm—hypothesized as a rubber or fiber-reinforced polymer—connecting a first clamp (for anchoring to an object, e.g., dental chair) and a second clamp (securing the extraction tube). The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 285–292 Read article
-
Polymer Chemistry-Driven Design of a Severable Dental Prophylaxis Instrument: Leveraging PEEK and Composites for Enhanced Functionality
Abstract: Polymer chemistry unlocks new possibilities for dental prophylaxis instruments by leveraging molecular design for enhanced functionality. This study explores Polyether Ether Ketone (PEEK), a semi-crystalline thermoplastic, in a novel instrument with a severable working end, featuring a tubular structure with internal screw threads (0.5–0.8 cm) anchoring replaceable elements via a threaded mechanism. PEEK’s aromatic backbone, alternating ether and ketone groups, yields a tensile strength of ~100 MPa, chemical inertness against …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 869–877 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Mechanical Characteristic Analysis of Five-Layer Carbon-Carbon Composite Material
Abstract: The current study investigates the fabrication and mechanical strength of five-layer carbon-carbon composite. The strong five-layer carbon-carbon composite material with high strength and modulus is made of a raw material called precursors. The polyacrylonitrile (PAN) method is used in the fabrication of carbon fiber. The characteristics of the resulting carbon material depend on the composition and structure of the precursor. A sheet of 50 x 40 cm five-layer carbon-carbon composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 405–417 Read article
-
Effect of Carbonyl Iron Particle Concentration on The Printability and Stiffness of Magnetorheological Elastomer Filaments
Abstract: Magnetorheological elastomer (MRE) are increasingly valued for their field-responsive mechanical properties, making them ideal for adaptive components in automotive, aerospace, and vibration control systems. However, conventional mould-based fabrication methods limit design flexibility, produce excess material waste, and are unsuitable for complex or customized geometries caused challenges that have hindered broader industrial adoption. Although 3D printing offers a compelling alternative, research on printable MRE filaments remains limited, particularly regarding how carbonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 310–317 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
Synthesis and Characterization of Graphene-Based Hydroxyapatite Using Hydrothermal Method for Its Biomedical Application
Abstract: Developing bone implant materials that combine biological compatibility with mechanical strength remains a major challenge in orthopedic research. Hydroxyapatite (HAp) closely mimics bone mineral and supports cell growth, but its brittleness limits load-bearing applications. To address this, a quaternary nanocomposite of hydroxyapatite (HAp), graphene (Gr), zirconia (ZrO2), and ferrocene (Fc) (Hap-Gr-ZrO₂-Fc) was synthesized through a one-step hydrothermal process. Graphene and zirconia provided reinforcement, while ferrocene contributed structural stability and carbon …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 120–135 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Design and Computational Analysis of Hybrid Carbon Fiber-Enhanced Metal Matrix Composite Spur Gears
Abstract: The automobile industry has to find the alternative solution for steel grade gears to overcome the weight to high strength ratio and thermal consideration with high damping properties. This study describes the design, FEM analysis, and performance evaluation of three new hybrid composite spur gears: a monolithic carbon fiber/epoxy (80/20 weight percent) composite (A), and two hybrids with steel (B) and aluminum (C) matrices (64% CF, 21% Epoxy, 15% metal). …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 158–172 Read article