Search
199 articles for “DB”
-
Compact MIMO Antenna Array based on Koch Fractal Metamaterial for 5G Applications
Abstract: In this paper, a design of a printed MIMO antenna array for 5G applications is proposed based on low profile structure. Thus, the antenna element is designed as a printed mender monopole with a partial ground plane. The partial ground plane is proposed to realize bandwidth enhancements through etching rectangular slots in the antenna back panel. It is found that such antenna shows two frequency bands, S11<-10dB, from 3 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 3, 2022 · pp. 1–7 Read article
-
Design and Analysis of A Terahertz Microstrip Antenna
Abstract: Terahertz radiation is in the electromagnetic spectrum. Terahertz radiation is used for a variety of purposes since it is non-ionizing and may move in a straight line. It has some similarities with microwaves, in that terahertz radiation can penetrate non-conducting materials, but it shows less depth of penetration than microwaves. Compared to millimeter waves the capacity of Terahertz waves is large enough and possesses high data transmission rates. Terahertz radiation …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Gain Enhanced 2.4 GHz Slotted Rectangular Microstrip Patch Antenna with FR-4 Epoxy Substrate
Abstract: Applications that use the Internet of Things (IoT) must be combined with wireless networking technologies. This makes it easy to get to the application data. The wireless communication system is a key part of the infrastructure for the Internet of Things. It acts as a bridge for two-way connections to gather data and send control messages. In this work, HFSS software is used to create a rectangular microstrip patch antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 1, 2023 · pp. 20–26 Read article
-
Bio Solvent EOR: Performance Assessment of Plant Extracts as Asphaltene Inhibitor
Abstract: Changes in pressure and temperature during oil production and transportation most notably during CO2 injection for enhanced recovery could lead to changes in the oil composition and deposition of asphaltene. Deposition of asphaltene near the wellbore region, production tubing and production facilities could cause severe flow assurance problem. Physical removal of asphaltene is costly and in most cases it is not preferred. A more favorable option is to prevent the …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 9–24 Read article
-
Design of a Stacked Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: The paper presents a stacked T-shaped Aperture coupled microstrip antenna designed for ultra-wide band wireless applications. The proposed UWB antenna covers two frequency bands as of 2.49 to 2.9 GHz and 6.85 to 20 GHz and used for the various applications like Bluetooth, Zig-Bee (2.4 GHz), C band (6 to 8 GHz), X band (8 to 12 GHz), Ku band (12 to 18 GHz) and Satellite communication. The stacked antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 12–16 Read article
-
Reduced Partial Product Booth Multiplier with An Effective Error Compensation Circuit
Abstract: Reduced partial product Booth multiplier is mainly used in multimedia and digital signal processing (DSP) systems. In this paper, design of reduced partial product (constant-width) Booth multiplier is introduced. Here the least significant bit (LSB) of partial product matrix of Booth multiplier is removed and an error compensation function is derived for reducing truncation error. A simple error compensation circuit (SC generator) is also introduced to reduce the computations that …
Published in Trends in Electrical Engineering · Vol. 5, Issue 2, 2015 · pp. 42–49 Read article
-
Design and Analysis of Dispersion Flattened Low Loss Photonic Crystal Fiber
Abstract: AbstractThis paper demonstrates the study of triangular lattice hexagonal photonic crystal fiber with GeO2 doped core. The photonic crystal fiber (PCF) studied in this research work has a core doped with 97% molar concentrated GeO2 with seven layers of air-capillaries around the core. The design and analysis of optical characteristics, i.e., dispersion, confinement loss, and effective area have been studied extensively for optimizing the structure for a certain range of …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 41–50 Read article
-
Design Optimization of C-Band 4-Channel WDM Optical Communication System using EDFA
Abstract: AbstractIn this work, the design and experimental characterization of high performance C band Erbium Doped Fiber Amplifier (EDFA) booster which is pumped at 980 nm are presented. The system is simulated using Optisystem software to achieve gain flatness of EDF through optimized fiber length and pumping wavelength. The performance of the system is more efficient at the pumping wavelength of 980 nm than that of 1480 nm for a wide …
Published in Trends in Opto-electro & Optical Communication · Vol. 4, Issue 2, 2014 · pp. 1–8 Read article
-
Comparative Analysis of Forward and Backward Auxiliary Selective ASE Pumping for L-Band EDFA
Abstract: ABSTRACT An exhaustive quantitative and comparative study of eight DWDM EDFA amplifier configurations has been conducted using Selective Wavelength Auxiliary Pumping (SWAP) by Forward Amplified Spontaneous Emission (FASE) and Backward ASE (BASE) pumping schemes for L-band signal gain enhancement and noise figure (NF) improvement. 31 dB gain and 5.19 dB NF at 1570 nm can be achieved using suggested optimum pumping configuration in L-band EDFA. The proposed design model can …
Published in Trends in Opto-electro & Optical Communication · Vol. 2, Issue 3, 2012 · pp. 17–30 Read article
-
Effect of the Position of Geotextile on the Performance Parameters of the Flexible Pavement
Abstract: The major deterioration of the flexible pavement is due to the combined effect of fatigue cracking caused by excessive horizontal strain at the bottom of the bituminous layer and rutting deformation caused by excessive vertical strain at the top of subgrade layer. For designing the flexible pavement, it is necessary to determine the minimum thickness of the road crust, required to withstand the expected fatigue life and rutting life. The …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 2, 2016 · pp. 65–75 Read article
-
Improvement in Return Loss of Power Splitter on EBG
Abstract: ABSTRACTIn this paper, it has been investigated to improve the return loss of a power splitter/ divider designed by partial removal of EBG rods. The EBG used is a rod structure and shows a Band Gap in the range of 1.55 to 2.9 GHz. The Power Splitter has a return loss at 2.45 GHz which falls in the range of the Band Gap. It has been found that in order …
Published in Journal of Communication Engineering & Systems · Vol. 1, Issue 1-3, 2011 · pp. 28–33 Read article
-
Investigations on PAPR Reduction using PTS Technique for OFDM Communication Systems
Abstract: AbstractOrthogonal Frequency Division Multiplexing (OFDM) is a spectral efficient technique for high data rate communication systems. It also provides robustness to multipath frequency selective fading but suffers from high peak-to-average power ratio (PAPR) and causes high power amplifiers to operate in the nonlinear region. In this paper partial transmit sequence (PTS) as PAPR reduction technique has been investigated. Mathematical modelling and Matlab simulation have been carried out to analyse its …
Published in Journal of Communication Engineering & Systems · Vol. 5, Issue 3, 2015 · pp. 19–26 Read article
-
PAPR Reduction using Selective Mapping Method for OFDM Communication Systems
Abstract: AbstractSelective mapping method (SLM) is one of the most important techniques used for peak-to-average power ratio (PAPR) reduction of orthogonal frequency division multiplexing (OFDM) communication system. It is simple in implementation, gives distortionless transmission and reduces PAPR significantly. Mathematical modelling and Matlab simulation have been carried out to analyse its performances. At of CCDF, PAPR values for OFDM signal without applying any reduction technique is 11.5, 11.8, 12.1, 12.4 and …
Published in Journal of Communication Engineering & Systems · Vol. 5, Issue 3, 2015 · pp. 50–57 Read article
-
CPW feed Flexible Antenna for Wireless Applications
Abstract: Flexible Microstrip CPW Feed Antenna using flexible FR-4 substrate is analyzed and presented over here. The Copper is used as conductive material for patch and CPW feed respectively. The performance in terms of return loss, gain, VSWR and radiation pattern is evaluated. The impedance bandwidth and gain of flexible antenna is 20.25% (2.179 GHz-2.665 GHz), 21.44% (3.232 GHz-4.026 GHz) and 1.4 dBi, 0.009 dBi respectively. The flexible property of the …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 6, Issue 3, 2018 · pp. 18–24 Read article
-
Ultra-Wideband Monopole Microstrip Filtenna with Hairpin Structure for Wireless Application
Abstract: Microstrip filtenna for WiMax/LTE and WLAN band has been proposed and presented. This paper presents design of bandpass filter having hairpin structure which is incorporated into the feedline. The FR4 substrate is used for the proposed antenna. The proposed filtenna has been designed and investigated using HFSS simulator. The proposed filtenna operates at 3.2 GHz. From the simulation results, it is extracted that passband of hairpin filter structure is from …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 7, Issue 1, 2019 · pp. 25–29 Read article
-
Two Port Ring Shaped DRA Based MIMO (Multiple Input Multiple Output) Antenna for WLAN Application
Abstract: This paper presents multiple input and multiple output (MIMO) antenna which is based on dielectric resonator with very good isolation. This antenna consists of two hybrid resonator and is fed by microstrip feedline through H-Shaped aperture is cut in ground plane just below the Ring DR. Area of this antenna is 40x50 mm². Impedance bandwidth (S11<-10dB) of this antenna is 5.15 to 6.15 GHz. The radiation efficiency and total gain …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 7, Issue 1, 2019 · pp. 17–24 Read article
-
A Survey Predicting the Influence of Age, Gender and Anthropometric Measures on Blood Pressure in Bengalee Subjects in West Bengal, India
Abstract: The World Health Organization (WHO) rates hypertension as one of the most important causes of premature death worldwide. It is estimated that by 2020, cardiovascular diseases will be the largest cause of mortality and morbidity in India. Recent studies identified waist circumference (WC), body mass index (BMI), waist hip ratio (WHR), and waist height ratio (WHtR) as the risk factors associated with hypertension. This study intended to verify the influence …
Published in Research and Reviews: A Journal of Health Professions · Vol. 4, Issue 2, 2014 · pp. 1–6 Read article
-
Enhancement of Gain & Bandwidth Microstrip Rectidollar Patch Array Antenna for Satellite Applications
Abstract: Over few decennary there is fastest growth in the field of satellite communication and it has its wide application in this field. There is many variety of antennas which can be used for satellite applications and the preference is given to microstrip antennas because of its merits and applications. This research includes the designing of a rectidollar patch array. In this the feeding given is microstrip feeding. The whole desigining …
Published in Recent Trends in Parallel Computing · Vol. 5, Issue 2, 2018 · pp. 25–30 Read article
-
Double Back Cylindrical Shaped Dielectric Resonator Antenna with Enhanced Gain and Bandwidth
Abstract: A cylindrical dielectric resonator antenna (DRA) is projected in this paper. This antenna consists of a double back cylindrical shaped DR. A metallic divest is functional at the surface of the DR. The necessary and advanced order cross modes are exhilarated in the antenna geometry because of the explicit structure. The antenna with double back cylindrical DR postulates the quantified axial ratio (AR) of 3dB with bandwidth of 10% in …
Published in Recent Trends in Parallel Computing · Vol. 5, Issue 2, 2018 · pp. 20–24 Read article
-
Wide Band Circle Slotted Inset Fed Microstrip Patch Antenna for Wireless Application
Abstract: A novel high gain, wideband circle slot-loaded microstrip patch antenna is presented in this paper. The proposed design is realized using inset linefeed method. The proposed microstrip antenna has a wide bandwidth covering the range from 1.033–2.859 GHz. By using simple inset linefeed technique and by introducing circle slot, the proposed antenna on 2 GHz operating frequency showing the bandwidth 93.83% having return loss −27.57 dB, gain 7.1 dBi and …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 1, 2014 · pp. 6–10 Read article